Professional Documents
Culture Documents
A6M LTCC System
A6M LTCC System
Ceramic System
A6M
High Frequency, High Reliability
LTCC Tape System
Ferro’s industry leading A6M LTCC tape system Thermal Coefficient of Expansion: 7 ppm/°C
combines stable low dielectric constant and unique
Tape Shrinkage:
low loss over a large frequency range, making it the
material of choice in a myriad of advanced X, Y (Laminate to fired) 15.4%
packaging applications up to 110 GHz.
Z (Green to Fired) 28.0%
A6M tape is available in standard thickness of 5 mil (Laminate to Fired) 14.3%
(127 μm) and 10 mil (254 μm) in 8 inch (20 cm) or Fired Density: > 2.45 g/cm
3
This data represents typical properties and is not intended to be used as specification limits
Reasonable care has been taken in the preparation of this information; All statements, technical information and recommendations contained herein are based on Seller’s or
Manufacturer’s test and the test of others, and are believed to be accurate, but no guarantee of accuracy is made. Judgment as to the suitability of information herein or the user’s
purposes are necessarily the user’s responsibility. Users shall determine the suitability of the products for their own intended application. Statements concerning the possible use of
these products are not intended as recommendation to use these products in infringement of any third-party intellectual property or patent rights anywhere in the world.
A6M
High Frequency, High Reliability
LTCC Tape System
Inner Conductor: CN30-025JH, Co-Fire Lamination: Iso-static 3000 psi (21MPa) @70°C for
10 minutes.
Via Fill: CN30-078, Co-Fire
Surface Conductors: Furnace Type: Box (preferred) or Belt Furnace with
Wire Bondable: CN30-080, Co-Fire controlled air-flow capability.
Solderable: CN36-020, Co-Fire
Solderable: FX31-014/FX31-017, Post-Fire Burnout: Room Temp to 450°C @ ≤ 2°C/min, hold
Aluminum Wire Bondable: 3068, Post-Fire at peak for 2 hours.
Brazable High Temp:
Adhesion Layer: CN30-025JH, Co-Fire Firing: 450°C to 850°C @ 6-8°C/min, Hold at peak
Au/Ge Solder: 4007, Post-Fire temperature for 10 - 15 mins.
Brazable Low Temp:
Adhesion Layer: CN30-065, Post-Fire Airflow: 100 SCFM
Bi/Sn Solder: CN30-079, Post-Fire
Setters: Fused quartz for typical applications or
Resistor: FX87 series, Co-Fire
Zirconia Felt for Hi-metallization parts. Bare alumina
setters should not be used
MIXED METAL SYSTEM
Storage: Sealed bags, 20 – 25 °C @ 40 – 50% RH
Inner Conductor: CN33-398, Co-Fire in clean room environments.
Via Fill: CN33-407, Co-Fire
Shelf-life: 1 year under recommended storage
Transition Via Fill: CN39-005, Co-fire conditions.
Surface Conductors:
Wire Bondable: CN30-080, Co-Fire
Solderable: CN36-020, Co-Fire
Solderable: FX31-014/FX31-017, Post-Fire * Refer to Ferro LTCC Design Guide for specific
Aluminum Wire Bondable: 3068, Post-Fire processing parameters and specifications
Brazable High Temp:
Adhesion Layer: CN30-025JH, Co-Fire
Au/Sn Solder: 4007, Post-Fire
Brazable Low Temp:
Adhesion Layer: CN30-065, Post-Fire
Bi/Sn Solder: CN30-079, Post-Fire
Resistor: FX87 series, Co-Fire
This data represents typical properties and is not intended to be used as specification limits
Reasonable care has been taken in the preparation of this information; All statements, technical information and recommendations contained herein are based on Seller’s or
Manufacturer’s test and the test of others, and are believed to be accurate, but no guarantee of accuracy is made. Judgment as to the suitability of information herein or the user’s
purposes are necessarily the user’s responsibility. Users shall determine the suitability of the products for their own intended application. Statements concerning the possible use of
these products are not intended as recommendation to use these products in infringement of any third-party intellectual property or patent rights anywhere in the world.