Professional Documents
Culture Documents
Arburg Allrounder 270a TD 680293 en GB PDF
Arburg Allrounder 270a TD 680293 en GB PDF
Arburg Allrounder 270a TD 680293 en GB PDF
DIN
US
ALLROUNDER 270 A
Distance between tie bars: 270 x 270 mm
Clamping force: 350 kN
Injection unit (acc. to EUROMAP): 5, 70, 100
US
DIN
DIN US
US DIN
DIN
US
20373)
19681) 19572)
1901
1220
438
425
254
max. 387
min. 196
120
500
44 2763
3354
645
Electrical connection
1) Injection unit 5
2) Injection unit 70
3) Injection unit 100
2
US
DIN
US DIN
DIN US
DIN
US
TECHNICAL DATA | 270 A
EN-GB 270 A
Clamping unit 270 A
with clamping force max. kN 350
Opening force | stroke max. kN | mm --- | 200
Mould height, fixed | variable min.-max. mm --- | 150-350
Platen daylight fixed | variable max. mm --- | 350-550
Distance between tie bars (w x h) mm 270 x 270
Mould mounting platens (w x h) max. mm 380 x 380
Weight of movable mould half max. kg 200
Ejector force | stroke max. kN | mm 16 | 60
Dry cycle time EUROMAP ² Version L1 min. s - mm 1 - 189
Version L2 min. s - mm 0,7 - 189
Upon request: other machine types and mould installation heights, screws, drive powers etc.
Machine type All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and
with EUROMAP size designation ¹ Drive material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be
mutually exclusive.
270 A 350-5 - | L2
1) Clamping force (kN) - size of injection unit = max. stroke volume (cm³) x max. injection pressure (kbar)
270 A 350-70 | 100 L1 | L2 2) Specifications depend on the drive variant / drive configuration.
3) Specifications relate to 400 V/50 Hz.
4) Emission sound pressure level at the workplace. Detailed information in the operating instructions.
[ ] Specifications apply to alternative equipment.
3
US
DIN
DIN US
US DIN
DIN
US
Ø125H7 Ø60H71)
Stroke max. 60 142-1 C
205
Y
X
A Thermoset - 20
a
Ø802) Ø903)
Ø18
30°
3
55
8-0,1
202)3)
21 Injection unit 5 / 70 / 1003) 1) 2)
180
Closing force for spring moulds / Robotic system mounting | C
during injection compression moulding*
300 52,5
250
17,5
Closing force [kN]
200
150
M8-16 deep
100 52
50
15
420
370
280
100
0
0 50 100 150 200
65
Mould stroke [mm]
* automatic locking force adjustment up to 20 kN
4
US
DIN
US DIN
DIN US
DIN
US
MOULD INSTALLATION DIMENSIONS, VARIANT L1 / L2 | 270 A
Ø125H7 Ø60H71)
45°
45°
350
280
210
140
70
516,5
Ø1
70
311,5
M12-24 deep
Bores for ARBURG mechanical 70
mould rapid clamping system Ø14
140
210
280
350
249 269
55
45°
45°
M8-16 deep
356,5
Ø21
180
Ø170
419
120,2
315
270
538,5
45
270
52 Ø14
M8-16 deep 315
404
410 430
1) Optional with size 5 injection unit
5
US
DIN
DIN US
US DIN
DIN
US
Theoretical shot weights for the most important injection moulding materials
1) average value
2) Normal working range for the size 5 injection unit is less than/greater than 50% of the specified values. PVC-P, PVC-U and fluoropolymers are not approved.
ARBURG GmbH + Co KG
Arthur-Hehl-Strasse
72290 Lossburg
Tel.: +49 7446 33-0
www.arburg.com
contact@arburg.com
© 2019 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and
information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
US
DIN
US DIN