Professional Documents
Culture Documents
Công Nghiệp Hỗ Trợ Việt Nam - Nhật Bản: Triển Lãm
Công Nghiệp Hỗ Trợ Việt Nam - Nhật Bản: Triển Lãm
第6回
ハノイ部品調達展示商談会
TRIỂN LÃM
CÔNG NGHIỆP HỖ TRỢ
VIỆT NAM - NHẬT BẢN
LẦN THỨ 6 TẠI HÀ NỘI
10 - 12 September 2015
Cultural Palace - Hanoi, Vietnam
INFORMATION
On the other hands, according to JETRO’s survey on Japanese-affiliated companies in Asia and
Oceania in 2014, the procurement rate of raw materials and parts, components by Japanese
companies in Vietnam was only 33.2%. It was not so high in comparison with this figure in other
neighboring countries such as 40.7% in Malaysia, 43.1% in Indonesia, 51.8% in Taiwan, 54.8% in
Thailand, and 66.2% in China.
Therefore, JETRO and VIETRADE as the role of Governmental trade promotion agencies have co-
operated to continuously organize “the 6th Vietnam-Japan Exhibition on Supporting Industries in
Hanoi – it is so called SIE 2015”. The exhibition is offering a place for 57 Japanese exhibitors (as
BUYERs) to show parts and components they expect to purchase in Vietnam and 44 Vietnamese
exhibitors (as SELLERs) to exhibit their produced accessories and production capabilities to
Japanese companies.
The SIE 2015 is held under the framework of Vietnam-Japan Economic Partnership Agreement
(VJEPA), which was signed by the two Governments in December 2008 and took effect from 1st
October 2009. It was also one of the themes of the Vietnam – Japan Joint Initiative of phase 3.
This year, SIE 2015 is also co-located with other 2 industrial specialized exhibitions, they are:
“Vietnam Manufacturing Expo – VME” by Reed Tradex Thailand, and “Industrial Components and Sub-
contracting Vietnam – ICS” by Hanoi Trade Promotion Center.
We are sure that the combination of these shows will make great effect for both exhibitors and
visitors and being expected to create good business opportunities for all the concerned parties.
Also we expect all exhibitors and visitors take full advantage of this event for networking.
September 2015
VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
cultural palace floor plan
EXIT
Tran Binh Trong Str.
ENTRANCE
EXIT
EXIT EXIT
OPENING
CEREMONY HALL
ENTRANCE
PARKING
Security
AREA
A1
SERVICE AREA
Tran Binh Trong Str.
ENTRY
Tran Hung Dao Str. Tran Hung Dao Str.
VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
vietnam - japan exhibition on supporting industries
booth layout
VN33 VN32 VN31 VN30 VN29 L06 L07 L09 L11 L12 L13 AIR CONDITIONER
TECHNO TAN TAM SUNPLA SHENGLI L BIBUS DE DUONG ORIENTAL AN INTEROLL NAM SON
6M x 3.2M STAFF ROOM Reed CESCO ROGER
CSC
VIETNAMESE COMPANY YAHATA VN
L17 L18 L19 L20 L21 L22 L23
VN28 VN21 VN14 VN07 D27 D28 E27 E28
VN34 SEIKICO HP-TECH DYNA MASTER NATIONAL TAIWAN PAVILION
LEGROUP COSMOS EMERGENCY
THINH PRECISION VIETNAM CAST TECH INSTRUMENT
F25 G25 G26 INDIA PAVILION
EXIT
HUNG AARD FSI
VN27 VN20 VN13 VN06 JP32 JP26 J23
SEIKI JAT HANOI CLOUD & O.N. NEW WOLF VIETNAM H29 H30 I29 I30
VN35 INNOVATION AUTOPARTS MECHANICAL DRAGON TECHNO
KYOEI
CENTURY SOCO ASKAR ABBOT VALGRO
TRI CUONG
G23 G24 OKAMOTO J22
VN26 VN19 VN12 VN05 JP31 JP25 E24 R/S H28 I27 I28
HAI VAN BINH TINH H27
VN36 PRODETECH INNOTEK PRECISION NODA KTC
HTMM TIRAWAT H26
MINH HA J19
VIET AN F21 F22 G22 AIR
I25 I26
VN25 VN18 VN11 VN04 JP30 JP24 E23 E22 KYOSEI KOREA
PRECISION GIAI PHONG BAC LASER
VN37 IDMEA NOBLE KOM H25 H24 I23 I24
MACHANICS RUBBER VIET TECH SANDVIK SEEK J18
VIET F19 G19 INTER
INDUSTRY MISUMI CAD/CAM
VN24 VN17 VN10 VN03 JP29 JP23 E21 VIETNAM FU ACME H22 I21 I22 YASKAWA
MINH ICHI NAGOYA
VN38 ECOTEK AUTO KANETSU VINATAIYO CHUN
VIET QUANG VIETNAM MOBILE KATAN I19 I20 J17
RAINBOW F17 SHIN G17 H19
VN23 VN16 VN09 VN02 JP28 JP22 E19 E18 TGI
MINH HUNG ECO ANMI MINATO JTEC SC MECOL
VN39 FU SODICK MITSUBISHI
I17 I18
DANTAL
VIETNAM DUNG DUNG VIETNAM TOOLS RUBBER VIETNAM PRESS
LONG J16
HTMP
VN22 VN15 VN08 VN01 E17 E16 GRIPWELL I16
JP27 JP21 APEX
MANH HTH DONG HAI 3H VIETNAM HITACHI
VN40 PLASTIC PLASTIC MIE
JFE GNUTTI WELD
INTECH QUANG TRUONG ASIA TEC
VIETNAM PHAT
THE PRIDE OF
VN41 THE STAR THE STAR PAVILION VIETNAM BY HPA
PAVILION H15 H16 J14
VIETNAM
JP46 JP39 JP20 JP13 F13 F14 G13 I13 I14
PRECISION E13 E14
RHYTHM FUJI
TAMRON IHI
VN42 BUSINESS PRECISION XEROX PANA NIKON H13 H14
HEXAGON
VIETTUC MATCH MICO SONIC I11 I12 J13
INDUSTRIAL
MAKING
JP45 JP38 JP19 JP12 ROBOT H11 H12
JAPAN FUKUO HASON
TAICO PRINTEC
VN43 OHTOMI MIMTECH KARASHI
VISION
F09 F10 H09 H10 I09 I10 J12
INTERNATIONAL JP56 JP51 JP44 JP37 JP18 JP11 E10 KAMO THAILAND PAVILION SMART
YODOKAWA V-HONEST SISIKU PREC IWASEYA FUJIKIN GAWA BY BUILD PLAS
VN44 CREATZ
YAMAGUCHI E07 KOBELCO H07 H08
VIETNAM JP55 JP50 JP43 JP36 JP17 JP10 F07 3D
G07 G08
H07 H08 J11
NAGANO NAGANO SP VISION THAISIN MOTOR KINGS
TSU ENSHU
YASHIMA SHIRAKAWA PALOMA ITSUWA BRITE
KUBA SANKO
E05 G05 G06
H05 H06 J10
JICA
JP54 JP49 JP42 JP35 JP16 JP09 NAGANO E06 F05 F06 TKS AIB I05 I06
TOYODA NAGANO PROLOG
YANAGAWA SHIOGAI OHASHI ICS CURIOUS NAGANO THANASAN
GIKEN TAKA
A
G03 G04
E03 T.N.S.L
JP53 JP48 JP41 JP34 JP15 JP08 NAGANO E04 F03 MATSU G02 H03 H04 I03 I04 J09
TECHNO NAGANO PHOTONIC
Y.H.SEIKO SAKURAI OGINO HIMEJI CHIENOWA NAGANO
TAIYO
NAGANO SMC
JETRO F01 H01 H02 I01 I02 J08
SECRETARIAT JP52 JP47 JP40 JP33 JP14 JP07 E01 E02 VIETNAM C.C.
HONDA DENSO+ GLEASON SAEILO
ROOM TOYOTA TOHO RICOH PANASONIC YANASE AUTOPART
LOCK HAMADEN ASIA
J07
JAPAN PAVILION
B JAPANESECCOMPANY D By ACTE F G H I
JETRO JP06 JP05 JP04 JP03 JP02 JP01 K07 K08 K09 K10 K11 K12 K13
INFORMATION CANON BANDO
AZUMAN
EJI
ARAI
AKITA
OILL SEAL
ADVANEX KIMBERLY K TOSTEM HISAKA AIR CONDITIONER BMM INFORMATION IGUS
6M x 3.2M BOOTH
J
CLARK WORKS
SD06
HUNZA
CONFERENCE
PROGRAM
VIP 3x2.5
OPENNING CEREMONY HALL
LOUNGE
WALK IN
REGISTRATION
ENTRANCE
Walk In
Walk In
Walk In
Walk In
Group
VIP
VIP
Pre
Printer
Printer
Printer
Printer
Printer
Printer
COM
STAGE
SERVER GA ROOM
ROOM
lockable lockable 2 Pcs
1 Pcs
SA
EMER
EX
VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
INFORMATION
booth layout
EXIT
TAN SHENG
TECHNOKOM TAM PHAT SUNPLA
PHAT LI
VN33 VN31 VN30
VN32 VN29
SEIKICO HP-TECH
THINH HUNG LEGROUP COSMOS
PRECISION VIETNAM
VN34 VN21 VN07
VN28 VN14
SEIKI JAT HANOI CLOUD &
TRI CUONG
INNOVNATIONS AUTOPARTS MECHANICAL DRAGON O.N TECHNO KYOEI
VN35
VN27 VN20 VN13 VN06 JP32 JP26
HAI VAN
VIET AN PRODETECH INNOTEK BINH MINH
PRECISION NODA KTC
VN36 VN26 VN19 VN05
VN12 JP31 JP25
PRECISION
VIET INDUSTRY GIAI PHONG BAC VIET
MECHANICS IDMEA NOBLE KOM
VN37 RUBBER VN11 VN04
VN25 VN18 JP30 JP24
MINH NAGOYA
VIET RAINBOW ICHI VIETNAM ECOTEK AUTOMOBILE
QUANG KATAN KANETSU
VN38 VN17 VN10 VN03
VN24 JP29 JP23
VIETNAM MINATO
MINH DUNG HUNG DUNG ECO VIETNAM ANMI TOOLS
HTMP RUBBER JTEC
VN23 VN16 VN09 VN02
VN39 JP28 JP22
INTECH MANH HTH TRUONG DONG HAI
3H PLASTIC
VIETNAM QUANG PHAT PLASTIC VIETNAM MIE JFE
VN01
VN40 VN22 VN15 VN08 JP27 JP21
VIETNAM VIETNAMESE COMPANIES
PRECISION
VN41 JAPANESE COMPANIES
VIETUC RHYTHM
INDUSTRIAL TAMRON PRECISION IHI FUJI XEROX
VN42 BUSINESS J46 J39 JP20 JP13
MATCH
VISION MAKING
INTERNATIONAL PRINTEC JAPAN FUKUOKARAS
VN43 TAICO OHTOMI MIMTECH HI
J45 J38 J19 JP12
YAMAGUCHI
VIETNAM SISIKU PREC
YODOGAWA V-HONEST IWASEYA FUJIKIN
VN44
JP56 JP51 JP44 JP37 JP18 JP11
ENSHU
JICA YASHIMA TSUKUBA SHIRAKAWA PALOMA ITSUWA SANKO
JP55 JP50 JP43 JP36 JP17 JP10
AKITA
JETRO
CANON BANDO AZUMANEJI ARAI OIL SEAL ADVANEX
INFORMATION
JP06 JP05 JP04 JP03 JP02 JP01
EXIT
VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
INFORMATION
EXHIBITORS LIST
Japanese Company
Booth No Company Name Page Booth No Company Name Page
JP 01 ADVANEX(VIETNAM)LTD 11 JP 54 YANAGAWA SEIKO VIETNAM CO., LTD 65
JP 02 AKITA OIL SEAL VIETNAM CO., LTD 12 JP 55 YASHIMA & CO.,LTD 66
JP 03 ARAI VIETNAM CO.,LTD 13 JP 56 YODOGAWA RASENKAN MFG. CO.,LTD 67
JP 04 AZUMANEJI CO., LTD 14
vietnamese Company
JP 05 BANDO MANUFACTURING (VIETNAM) CO., LTD 15
Booth No Company Name Page
JP 06 CANON VIETNAM CO., LTD 16
VN 01 3H PLASTIC JSC 68
JP 08 CHIENOWA CO., LTD 17
VN 02 ANMI TOOLS CO.,LTD 69
JP 09 CURIOUS SEIKI VIET NAM CO., LTD 18
VN 03 AUTOMOBILE AND MOTORCYCLE PARTS MANUFACTURING 70
JP 07 DENSO MANUFCTURING VIETNAM CO., LTD 19 HUNG YEN CO.,LTD
JP 13 FUJI XEROX HAI PHONG CO., LTD 21 VN 05 BINH MINH TMC CO.,LTD 72
JP 07 HAMADEN VIETNAM CO., LTD 24 VN 08 DONG HAI PLASTIC ONE MEMBER CO.,LTD 75
JP 18 IWASEYA VIET NAM CO., LTD 30 VN 14 HP-TECH VIETNAM ENGINEERING AND MOLDS JSC 81
VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
japanese company
Sector of items
Booth Mold man- Machine/
Company Name Page Plastic/ ufacturing Forg- Ma- Plating, Electron/
No. Assem- Equipment Jig, Pack-
Rubber ing, Die chining Coating, Heat- Electric Material Others
(Press shot, bly (Processing, Deliv- Tools aging
parts casting parts treatment parts
plastic etc.) ery, Maintenance)
JP 01 Advanex (Vietnam) Ltd 11
VIETNAM - JAPAN
JP 02 Akita Oil Seal Vietnam Co.,Ltd 12
JP 03 Arai Vietnam Co.,Ltd 13
JP 04 Azumaneji Co.,Ltd 14
INFORMATION
VIETNAM - JAPAN
parts (Press shot, casting parts Delivery,
treatment parts Maintenance)
plastic etc.)
VN 01 3H Plastic JSC 68
VN 02 ANMI Tools Co.,Ltd 69
INFORMATION
Company Profile
Establishment Year : 2006
Number of Employees : 92
Factory Address : Lot F3, Phuc Dien IZ, Cam Giang district,
Hai Duong province, Vietnam
Factory space (m2) : 1,700
Charter Capital (USD) : 850,000
Turnover in 2014 (USD) : 5,000,000
Main Technology : Precision products
Main Customers : Canon; Denso; Medikit
Quality Certificates : ISO 9001-2008; ISO 14001-2004
Other information : N/A
Contact Information
Person in charge : Mr. Soichi Tsurusawa
Position : Sales Manager
Address (Office) : Lot F3, Phuc Dien IZ, Cam Giang District,
Hai Duong province, vietnam
Hochiminh office : Room 503; Building A, Incubation Center,
Tan Thuan EPZ, Ho Chi Minh city, Vietnam
Tel : + 84 - 320 - 3545 075
Fax : + 84 - 320 - 3545 076
Email : Soichi_tsurusawa@advanex.co.jp
Website : http:// www.advanex.co.jp
VIETNAM - JAPAN 11
SUPPORTING INDUSTRIES EXHIBITION
JP 02 JAPANESE COMPANY
Selling Items
Product name: O-RINGs Product name: Rubber Gaskets
Use for: Machinery Use for: Machinery
Minimum lot: 10,000 pcs Minimum lot: 10,000 pcs
Material: FKM, NBR, VMQ, Material: FKM, NBR, VMQ,
EPDM, H-NBR etc EPDM, H-NBR etc
Purchasing Items
Product name: Rubber mold Product name: Rubber
Use for: Vulcanizing rubber Use for: Production
Minimum lot: 1 pc Minimum lot: 100-1000kg
Material: SUS, NAC Material: FKM, NBR, VMQ,
EPDM, H-NBR etc
Company Profile
Establishment Year : 2005
Number of Employees : 60
Factory Address : Lot A-4, Nomura Haiphong Industrial
An Duong District, Haiphong city, Vietnam
Factory space (m2) : 10,204
Charter Capital (USD) : 898,000
Turnover in 2012 (USD) : 820,000
Main Technology : Mini O-ring, Rubber gaskets, Packing
Main Customers : Motorcycle parts maker, Water pipe maker
Quality Certificates : ISO9001:2008
Other information : Akita Oil Seal Co., Ltd sells high quality precise rubber part.
Contact Information
Person in charge : Mr. Watanabe Goki
Position : Director
Address (Office) : Lot A-4, Nomura Haiphong Industrial
An Duong District, Haiphong city, Vietnam
Tel : +84 - 31-3743-310
Fax : +84 - 31-3743-312
Email : aos-watanabe@akita-aos.com
Website : http://www.akita-aos.com/index.html
12 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 03
ARAI VIETNAM CO.,LTD
We look for mold maker as a partner, who can produce Molds of big size for 450 ton ~ 850 ton
Injection machine
We look for cheaper packing material for the parts of Home Appliances
Selling Items
Product name: Tray shelf Product name: Appearance and
Use for: Home Appliances parts assembled
Minimum lot: By Customer Use for: Home Appliances parts
requesst Minimum lot: By Customer
Material: Plastic, Plastic with glass requesst
Material: Plastic, Plastic with glass
Product name: Internal Parts for Product name: Balancer Case
Home Appliances Use for: Home Appliances
Use for: Home Appliances Minimum lot: By Customer
Minimum lot: By Customer requesst
requesst Material: Plastic
Material: Plastic
Purchasing Items
Product name: Injection Mold Product name: Packing Material
Use for: Home Appiances Use for: Plastic parts for Home
Minimum lot: 1 pc Appliances
Material: Steel Minimum lot: N/A
Material: Danpla, Foam, Carton
Company Profile
Establishment Year : 09/23/2011
Number of Employees : 65
Factory Address : Plot 7- Dong Van IZ, Duy Tien District, Ha Nam province, Viet Nam
Factory space (m2) : 20,000
Charter Capital (USD) : 4,500,000
Turnover in 2012 (USD) : 1,350,563
Main Technology : Injection Molding of Plastic Parts
Main Customers : Field of Home Appliances
Quality Certificates : N/A
Other information : We still have Production Capacity
Contact Information
Person in charge : Mr. Kunio Saito/ Mr. Thuan
Position : General Director/ Assistant Manager
Address (Office) : Plot 7- Dong Van IZ, Duy Tien District,
Ha Nam province , Viet Nam
Tel : +84 - 351 - 358 2222 / +84 - 945 - 381 912 (Mr. Saito)
+ 84 - 989 - 627 285 (Mr. Thuan)
Fax : +84 - 351 - 358 2223
Email : Saito.araivietnam@gmail.com/ Thuan.araivietnam@gmail.com
Website : http:// www.fact-link.com.vn/home/arai-vn/
VIETNAM - JAPAN 13
SUPPORTING INDUSTRIES EXHIBITION
JP 04 JAPANESE COMPANY
Purchasing Items
Product name: Bolts Product name: Nuts
Use for: Automobiles Use for: Furniture
Minimum lot: 30,000 pcs Minimum lot: 100,000 pcs
Material: S45C Material: SS400
Company Profile
Establishment Year : 1961
Number of Employees : 30
Factory Address : 2-10-1, Ishiwara, Sumida-ku, Tokyo, Japan
Factory space (m2) : 380
Charter Capital (USD) : 125,000
Turnover in 2014 (USD) : 10,000,000
Main Technology : Screws and industrial parts
Main Customers : Assembly manufacturers
Quality Certificates : ISO 9001, ISO 14001
Other information : We have provided industrial parts satisfying special orders for more
than half a century.
Contact Information
Person in charge : Mr. Nguyen Hoang Tung (for both Vietnamese and Japanese)
Position : Manager
Address (Office) : 609, Linh Nam Street, Hoang Mai District, Hanoi, Vietnam
Tel : +84 - 4 - 3643 6054
Fax : +84 - 4 - 3643 6055
Email : tung@azumaneji.co.jp
Website : http://www.azumaneji.co.jp
14 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 05
BANDO MANUFACTURING (VIETNAM) CO., LTD
We are looking for die casting parts for motorbike / automobile and steel plate for our precision part
Selling Items
Product name: Industrial Product name: Sunline Belt
Transmission Belt Use for: Light Duty Conveyor
Use for: Drive past for Industrial Belt
equipment Minimum lot: N/A
Minimum lot: N/A Material: N/A
Material: N/A
Product name: Automotive Product name: Tension Master
Transmission Belt Use for: Checking belt tension
Use for: Drive belt for Minimum lot: N/A
automobile Material: N/A
Minimum lot: N/A
Material: N/A
Company Profile
Establishment Year : 2012
Number of Employees : 65
Factory Address : RF No.3, Thang Long II Industrial Park, Yen My District,
Hung Yen Province, Vietnam
Factory space (m2) : 2,500
Charter Capital (USD) : N/A
Turnover in 2014 (USD) : N/A
Main Technology : Manufacturing
Main Customers : Motorcycle Manufacturers
Quality Certificates : ISO9001, ISO14001
Other information : N/A
Contact Information
Person in charge : Mr. Hitoshi Daimon
Position : General Manager
Address (Office) : Head Quarter : RF No.3 Thang Long II Industrial Park,
Yen My district, Hung Yen province, vietnam
HCMC Branch: 5 FL, Sunshine Building 74 C Nguyen Van Cu Street,
Nguyen Cu Trinh Ward, Dist 1, HCM City,
Tel : Head Quarter : +84 - 321 - 3974 986; HCMC Branch: +84 - 8-3838 5036
Fax : Head Quarter : +84 - 321- 3974 911; HCMC Branch: +84 - 8-3920 6987
Email : Head Quarter : salesteam@bando-vietnam.vn (VIETNAMESE)
HCMC Branch : daimon@bando-vietnam.vn. (JAPANESE)
Website : http://www.bando-bmvn.com/
VIETNAM - JAPAN 15
SUPPORTING INDUSTRIES EXHIBITION
JP 06 JAPANESE COMPANY
Purchasing Items
Product name: Foam, Resin, Product name: Tape, Tube, Spur,
Mould Die Cap, Screw, Belt, E-ring, sheet
Use for: Printer, Scanner, Cartridge insulation…
Minimum lot: 2,500,000 pcs Use for: Printer, Cartridge, Scanner
Material: Plastics Minimum lot: 2,500,000 pcs
Material: PE, Silicon…
Product name: Roller, Shaft, Product name: PCB bare board
Spring,Rubber Use for: Printer & Scanner
Use for: Printer & Scanner Minimum lot: 2,500,000 pcs
Minimum lot: 2,500,000 pcs Material: FR1/4
Material: SWC, SUM24L…
Company Profile
Establishment Year : 2001
Number of Employees : 22,000
Factory Address : Thang Long Factory: A-1, Thanglong Industrial Park,
Dong Anh District, Hanoi, Vietnam
Que Vo Factory : B-1, Que Vo Industrial Park, Que Vo District,
Bac Ninh province, Vietnam
Tien Son Factory: No.12, TS 10 Road, Tien Son Industrial Park,
Tien Du district, Bac Ninh province, Vietnam
Factory space (m2) : 600,000
Charter Capital (USD) : 306,700,000
Turnover in 2014 (USD) : N/A
Main Technology : Printing, Scanning, Cartridge
Main Customers : End user
Quality Certificates : ISO 9001:2000
Other information : N/A
Contact Information
Person in charge : Mr. Tamotsu Mizuhashi
Position : Assistant General Manager
Address (Office) : A-1, Thang Long Industrial Park, Dong Anh District,
Hanoi, Vietnam
Tel : +84 - 4-3881-2111
Fax : +84 - 4-3881-1783
Email : ps-common1@canon-vn.com.vn
Website : http://www.canon-cvn.com.vn
16 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 08
CHIENOWA CO., LTD
We are looking for the suppliers which manufacture and sell Magnet
Selling Items
Product name: Needle Detector
Use for: Sewing factory
Minimum lot: 1 pc
Material: N/A
Purchasing Items
Product name: Magnet Product name: electronics
Use for: Sensor components
Minimum lot: 6 pcs Use for: PCBA
Material: Ferrite magnet Minimum lot: depend on MOQ
Material: Semiconductor
Company Profile
Establishment Year : 2014
Number of Employees : 7
Factory Address : 814/21 Su Van Hanh Street, Ward 12, District 10, HCM city, Vietnam.
Factory space (m2) : 200
Charter Capital (USD) : 150,000
Turnover in 2014 (USD) : N/A
Main Technology : Sensor &controller Development
Main Customers : N/A
Quality Certificates : N/A
Other information : Our company just established at the end of 2014.
We can design the own circuit,own mechatronics.
Contact Information
Person in charge : Mr. Giang Cong Minh
Position : Maneger
Address (Office) : 814/21 Su Van Hanh Street, Ward 12, District 10,
HCM city, Vietnam
Tel : +84 - 8 - 3663 4301
Fax : N/A
Email : minh@chienowa.agri-wave.com
Website : http://www.chienowa.com.vn
VIETNAM - JAPAN 17
SUPPORTING INDUSTRIES EXHIBITION
JP 09 JAPANESE COMPANY
Purchasing Items
Product name: Drawing bar Product name: Work benches
Use for: Material Use for: Equipment
Minimum lot: 17t /month Minimum lot: N/A
Material: Ferrous, stainless Material: N/A
steels, Aluminum
Company Profile
Establishment Year : 2012/11
Number of Employees : 37
Factory Address : Lot3, TS25, Tien Son Industrial, Tu son district, Bac Ninh province, vietnam
Factory space (m2) : 2,100
Charter Capital (USD) : 3,000,000
Turnover in 2014 (USD) : 605,879
Main Technology : Precision cutting parts
Main Customers : Denso manufacturing Vietnam co., LTD Hamaden Vietnam co., LTD
Quality Certificates : ISO9001 (expected 2015/12)
Other information : We help with the local procurement of a precision cutting parts.
Contact Information
Person in charge : Mr. Tatsuo Yamawaki / Ms. Le Van Nga
Position : General Director / Supervisor
Address (Office) : Lot3, TS25, Tien Son Industrial, Tu son district,
Bac Ninh province, Vietnam
Tel : +84 - 241 - 3734 995
Fax : +84 - 241 - 3734 085
Email : yamawaki@curius.co.jp / levannga@curious-vn.com
Website : N/A
18 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 07
Company Profile
Establishment Year : 4/10/2001 received investment license
Number of Employees : 3,800
Factory Address : Thang Long Industrial Park, Dong Anh District, Hanoi, Vietnam
Factory space (m2) : 56,000 (Factory: 22,800m2, Office:3,450m2)
Charter Capital (USD) : 10,000,000
Turnover in 2014 (USD) : 342,000,000
Main Technology : Assembly Automotive Component
Main Customers : Export to all over the world ( Car Maker)
Quality Certificates : ISO TS 16949
Other information : N/A
Contact Information
Person in charge : Mr. Vu Ba Tien
Position : Purchasing Technical Supervisor
Address (Office) : Plot E1, Thang Long Industrial Park, Dong Anh district
Hanoi, Vietnam
Tel : +84-4-38811608 (ext: 3434)
Fax : +84-24-39590310
Email : Vu_Ba_Tien@dneso.com.vn
Website : http:// www.denso.com.vn
VIETNAM - JAPAN 19
SUPPORTING INDUSTRIES EXHIBITION
JP 10 JAPANESE COMPANY
Purchasing Items
Product name: Chemicals Product name: Cutting Tools
Use for: Surface Treatment Use for: Machining
(Plating) Minimum lot: N/A
Minimum lot: N/A Material: N/A
Material: N/A
Company Profile
Establishment Year : 2011
Number of Employees : 100
Factory Address : Lot H4-2, Que Vo Industrial Zone, Que Vo district,
Bac Ninh province, Vietnam
Factory space (m2) : 15,097
Charter Capital (USD) : 3,500,000
Turnover in 2014 (USD) : 2,000,000
Main Technology : Plating, and Machining
Main Customers : Automotive, Motorcycle, and OA makers
Quality Certificates : ISO9001
Other information : We are the specialists for the “special process”.
Contact Information
Person in charge : Mr. Yoichi Yamagishi / Mr. Vo Dong Vien
Position : General Director /General Manager
Address (Office) : Lot H4-2, Que Vo Industrial Zone, Que Vo district,
Bac Ninh province, Vietnam
Tel : +84 - 241- 395 2121
Fax : +84 - 241- 395 2123
Email : yy@esv.com.vn / vien@esv.com.vn
Website : http://www.esv.com.vn
20 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 13
FUJI XEROX HAI PHONG CO., LTD
Looking for PWBA components. (relay / thermistor / diode / xtal / fuse / SW/ inlet / heat sink…)
Purchasing Items
Product name: Rubber Roll Product name: FFC
Use for: Printer Use for: Printer
Minimum lot: N/A Minimum lot: N/A
Material: N/A Material: N/A
Company Profile
Establishment Year : 2012
Number of Employees : 1,700
Factory Address : No.In1-1 & 1-3, VSIP Hai Phong city, Vietnam
Factory space (m2) : 176,000
Charter Capital (USD) : 36,000,000
Turnover in 2014 (USD) : N/A
Main Technology : Multifunction Devices, Printers
Main Customers : Fuji Xerox Co.,LTD
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr.TAKAYUKI YAMATO
Position : Procurement Manager
Address (Office) : No.In1-1 & 1-3,VSIP Hai Phong city, Vietnam
Tel : N/A
Fax : N/A
Email : fxhp-info@fxhp.com.vn
Website : N/A
VIETNAM - JAPAN 21
SUPPORTING INDUSTRIES EXHIBITION
JP 11 JAPANESE COMPANY
Purchasing Items
Product name: Sleeves Product name: Parts for
Use for: Manufacturing of Automatic Valves
Semiconductor Use for: Manufacturing of
Minimum lot: 1,000 pcs Semiconductor
Material: Stainless steel Minimum lot: 1,000 pcs
Material: Aluminum, PTFE
Company Profile
Establishment Year : 2002
Number of Employees : 454
Factory Address : H-2B plot,Thang Long Industrial Park Dong Anh District,
Hanoi, Vietnam
Factory space (m2) : 21,000
Charter Capital (USD) : 9,000,000
Turnover in 2014 (USD) : 19,000,000
Main Technology : Manufacturing of Valves and Fittings
Main Customers : Fujikin Carp Group( Affiliated companies)
Quality Certificates : ISO 9001:2008, ISO 14001:2004
Other information : N/A
Contact Information
Person in charge : Mr. Yutaka Kaneko
Position : General Director
Address (Office) : H-2B plot,Thang Long Industrial Park,
Dong Anh District, Hanoi, Vietnam
Tel : +84-4-3881 2566
Fax : +84-4-3881 2577
Email : kaneko@fujikin.co.jp
Website : http://www.fujikin.co.jp/fujikinHP_e/index.asp
22 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 12
FUKUOKARASHI VIETNAM CO., LTD
We look for the company purchasing metal precision parts which we manufacture and sell.
Selling Items
Product name: Precision parts Product name: Precision parts
Use for: Precision Machine Use for: Precision Machine
Minimum lot: Negotiable Minimum lot: Negotiable
Material: Stainless Material: Titanium
Company Profile
Establishment Year : 2013
Number of Employees : 7
Factory Address : B-2 Long Duc Industrial Park, Long Duc Ward,
Long Thanh District, Dong Nai Province, Vietnam
Factory space (m )
2
: 768
Charter Capital (USD) : 115,000
Turnover in 2014 (USD) : N/A
Main Technology : Manufacturing metal precision parts
Main Customers : China, Vietnam, Japan
Quality Certificates : N/A
Other information : We guarantee “Sabae-Fukui” quality.
Contact Information
Person in charge : Mr. Toshimitsu Yamamoto
Position : General Director
Address (Office) : B-2 Long Duc Industrial Park, Long Duc Ward,
Long Thanh District, Dong Nai Province, Vietnam
Tel : +84 - 61 - 368 1200
Fax : +84 - 61 - 368 1180
Email : yamamoto@fukuokarashi.jp
Website : http://www.fukuokarashi.jp
VIETNAM - JAPAN 23
SUPPORTING INDUSTRIES EXHIBITION
JP 07 JAPANESE COMPANY
Purchasing Items
Product name: DCV3 Product name: GM coil
Use for: CAR EMS Use for: CAR EMS
Minimum lot: 100,000 pcs Minimum lot: 120,000 pcs
Material: N/A Material: N/A
Company Profile
Establishment Year : October 2008
Number of Employees : 2,000 (end of Jun.2015)
Factory Address : Thang long II Industrial Park, Yen My district, Hung Yen province, Vietnam
Factory space (m2) : 29,000
Charter Capital (USD) : 32,000,000
Turnover in 2014 (USD) : N/A
Main Technology : Manufacturing & Sale of Automotive component part
Main Customers : Advics, DENSO- Subsidiaries including,
DENSO MANUFACTURING VIETNAM
Quality Certificates : ISO/TS 16949
Other information : Start of Operation on January 2012
Contact Information
Person in charge : Mr. TOSHIO MIYAWAKI, Ms. PHAM THI MEN
Position : Director, Supervisor
Address (Office) : Plot A4, Thang Long II IP, Yen My district,
Hung Yen provine, vietnam
Tel : +84 - 3213 - 589 388
Fax : +84 - 3213 - 589 518
Email : toshio_miyawaki@hamadenvn.com,
: pham_thi_men@hamadenvn.com
Website : N/A
24 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 15
HIMEJI ELECTRIC PLATING VIETNAM CO., LTD
We are hard chrome plating of mainly motorcycle parts.
We look for the suppliers which manufacture and sell plating jig (turning process, resin coating,
welding)
Company Profile
Establishment Year : 2011
Number of Employees : 30
Factory Address : Lot 8.13, Khai Son IZ, Thuan Thanh District,
Bac Ninh Province, Vietnam
Factory space (m2) : 1,200
Charter Capital (USD) : 969,802
Turnover in 2014 (USD) : 663,613
Main Technology : Hard Chrom Plating
Main Customers : FCC, Strong Way, Exedy
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. Hiroshi Hatanaka
Position : Factory Manager
Address (Office) : Lot 8.13, Khai Son IZ, Thuan Thanh District,
Bac Ninh Province, Vietnam
Tel : +84-241-3798 618
Fax : +84-241-3798 619
Email : hiroshi.hatanaka@himeji-mekki.co.jp
Website : http://himeji-mekki.co.jp/
VIETNAM - JAPAN 25
SUPPORTING INDUSTRIES EXHIBITION
JP 14 JAPANESE COMPANY
Company Profile
Establishment Year : 2008
Number of Employees : 503 (End of Jun., 2015)
Factory Address : DongVan II Industrial Zone DuyTien District,
HaNam Province, Vietnam
Factory space (m2) : 40,000
Charter Capital (USD) : 4,546,000
Turnover in 2014 (USD) : 33,800,000
Main Technology : Assembly Key set
Main Customers : Honda Vietnam
Quality Certificates : ISO 9001:2008, ISO 14001:2004
Other information : One of the best suppliers of Honda Vietnam
Contact Information
Person in charge : Mr. Nguyen Duc Linh
Position : Sales & Purchase Manager
Address (Office) : DongVan II Industrial Zone DuyTien District,
HaNam Province, Vietnam
Tel : +84 - 351- 626 2042
Fax : +84 - 351- 626 2040
Email : nguyen_duc_linh@hondalock-vn.com
Website : http://www.hondalock.co.jp/english/global/vietnam-lang.html
26 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 16
ICS VIETNAM CO., LTD
We are looking for customers dealing with processing products and molds which are required heat
treatment and brazing. We are looking for suppliers having processing of stainless steel fixture, sale
wire, foil, mesh, brazing material andcarbon steel products.
Selling Items
Product name: Annealing Product name: Quenching, Tempering
Use for: Stress relief, Solution, Use for: Non-oxidation, Low
Homogenization… distortion…
Minimum lot: N/A Minimum lot: N/A
Material: Carbon Steel, Steel Alloys, Titanium Material: Carbon Steel, Steel
alloys, Ni-base alloys, Co-based alloys, Steel alloys… Alloys, Martensitic stainless steel…
Product name: Magnetic Product name: Precipitation
Annealing and Age Hardening
Use for: Stress relief, Low distortion, Use for: Precipitation, Curing
Magnetic properties improvement… Minimum lot: N/A
Minimum lot: N/A Material: Beryllium steel, precipitation copper
Material: Permalloy, Invar, Kovar…. alloys, precipitation hardening stainless steel…
Product name: Brazing
Use for: Junction meterial
Minimum lot: N/A
Material: Sliver Alloys, Copper
Alloys, Nickel Alloys…
Purchasing Items
Product name: SUS Material, brazing material…
Use for: Jig of heat treatment (wire, sheet and
basket), brazing…
Minimum lot: N/A
Material: SUS304, SUS310,…
Company Profile
Establishment Year : 09/2012
Number of Employees : 13 persons (Vietnamese), 02 persons (Japanese)
Factory Address : Tan Truong IZ, Cam Giang district, Hai Duong Province, vietnam
Factory space (m2) : 10,000
Charter Capital (USD) : 4,000,000
Turnover in 2014 (USD) : N/A
Main Technology : Vacuum heat treatment, oil quenching, brazing
Main Customers : Auto part and mold product companies
Quality Certificates : N/A
Other information : The quality is the same as Japanese
Contact Information
Person in charge : Mr. Soutome Takumi / Mr. Vu Van Viet
Position : Factory Manager / Sales assistant
Address (Office) : Tan Truong IZ, Cam Giang district, Hai Duong Province
Tel : +84 - 320 - 362 6165
Fax : +84 - 320 - 362 6166
Email : soutome-t@ics-vn.com/ viet-vv@ics-vn.com
Website : http://ics-vn.com
VIETNAM - JAPAN 27
SUPPORTING INDUSTRIES EXHIBITION
JP 20 JAPANESE COMPANY
IHI CORPORATION
We are looking for the suppliers which manufacture the parts for Industrial Machinery, Compressors,
Logistics Systems, Agricultural Machinery, etc
Purchasing Items
Product name: Diffuser Product name: Machining Item
Use for: Compressor Use for: Industrial Machine
Minimum lot: 1 pc/lot Minimum lot: N/A
Material: Al or SUS Material: SS, SUS
Company Profile
Establishment Year : 1853
Number of Employees : 28,533
Factory Address : 8 Factories in Japan
Factory space (m2) : N/A
Charter Capital (USD) : 1,071,000,000
Turnover in 2014 (USD) : 14,558,000,000
Main Technology : Industrial Machinery, Compressors,
Logistics Systems, Agricultural Machinery, etc
Main Customers : N/A
Quality Certificates : ISO9001
Other information : N/A
Contact Information
Person in charge : Mr. Toshio Mitsui
Position : Procurement Manager
Address (Office) : 515, Sun Red River Building, 23 Phan Chu Trinh, Hanoi, Vietnam
Tel : +84 - 93 222 8977
Fax : +84 - 4 - 3934 5303
Email : toshio_mitsui@ihi.co.jp
Website : http//www.ihi.co.jp
28 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 17
ITSUWA VIETNAM CO., LTD
Our purchasing items are…
LED Unit Assembly / Home Appliances (Frying Pan, etc.) / PCB / Motor / LCD / Plastic Paint, etc.
Our selling items are…
Grinding Wheel / Processing Oil / Detergent / Anti-Rust Oil / Industrial Filters / EDM Wire, etc.
Selling Items
Product name: Grinding Wheel Product name: Processing Oil,
Use for: Grinding Process Detergent, Anti-Rust Oil
Minimum lot: 1 pc Use for: Process
Material: N/A Minimum lot: 1 drum/1 can
Material: N/A
Purchasing Items
Product name: LED Unit Assy Product name: Frying Pan
Use for: Lighting Use for: Cooking
Minimum lot: 1,000 pcs Minimum lot: 1,000-3,000 pcs
Material: Nil Material: AL or Diecast
Company Profile
Establishment Year : 2009
Number of Employees : 20
Factory Address : N/A
Factory space (m2) : N/A
Charter Capital (USD) : 100,000
Turnover in 2014 (USD) : 16,000,000
Main Technology : Import&Export / Sales Agent / EMS(Assy)
Main Customers : Panasonic / NIDEC / HONDA / YAMAHA
Quality Certificates : N/A
Other information : VMI (in NWH&BWH) / JIT Delivery /
Contact Information
Person in charge : Mr. Miyazoe Yu
Position : Director
Address (Hanoi Office) : 9th Floor, ICON4 Building, 243A De La Thanh Street,
Lang Thuong Ward, Dong Da District, Hanoi
Tel : +84 - 43 - 773 5125 / Fax : +84 - 43 - 773 7376
Address (HCM Office) : No.93, Road 2, Hung Gia 2, Tan Phong Ward,
District7, Ho Chi Minh
Tel : +84 - 43-773 5125 / Fax: +84 - 43-773 7376
Email : miyazoe@itsuwa.co.jp
Website : http://www.itsuwa.co.jp http://www.itsuwa.vn
VIETNAM - JAPAN 29
SUPPORTING INDUSTRIES EXHIBITION
JP 18 JAPANESE COMPANY
Selling Items
Product name: Pulley Product name: Choke coil
Use for: CAR Use for: CAR
Minimum lot: N/A Minimum lot: N/A
Material: S45C Material: Copper wire
Company Profile
Establishment Year : 2013
Number of Employees : 10
Factory Address : Plot II, Dong Vang, Dinh Tram Industrial Park,
Viet Yen District, Bac Giang province, Vietnam
Factory space (m2) : 3,250
Charter Capital (USD) : 1,500,000
Turnover in 2014 (USD) : N/A
Main Technology : Precision mechanical machining, Assembly, Wire winding
Main Customers : N/A
Quality Certificates : N/A
Other information : Mass production, even a small amount of machining will
correspond. Please to contact us
Contact Information
Person in charge : Mr. HATORI HIKARU
Position : Managing Director
Address (Office) : Plot II, Dong Vang, Dinh Tram Industrial Park,
Viet Yen District, Bac Giang province, Vietnam
Tel : +84 - 240-3818 230
Fax : +84 - 240-3818 231
Email : h.hatori@iwaseya.co.jp
Website : http://iwaseya.co.jp
30 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 19
Purchasing Items
Product name: Sylinder Product name: Joint Block
Use for: Keys Use for: hinge
Minimum lot: 4,000 pcs Minimum lot: 10,000 pcs
Material: SUS420J2 Material: SUS420J2
Company Profile
Establishment Year : 2011
Number of Employees : 30
Factory Address : Tan Truong IZ, Hai Duong Province, Vietnam
Factory space (m )
2
: 2,034
Charter Capital (USD) : 1,200,000
Turnover in 2014 (USD) : 700,000
Main Technology : Metal Injection Molding (MIM)
Main Customers : N/A
Quality Certificates : N/A
Other information : We are the only one company in Vietnam which manufactures
MIM, called Metal Injection Moldings. MIM supplies metal products that is small, complicated
shapes, high hardness, and large lot of orders without cutting process because it is all made by
injecting.
Contact Information
Person in charge : Mr. Go Okizaki
Position : Deputy Director
Address (Office) : Tan Truong IZ, Hai Duong Province, Vietnam
Tel : +84 -164 - 388 0680
Fax : +84 - 320 - 2626 009
Email : go@tokotsusho.co.jp
Website : http://tokotsusho.co.jp
VIETNAM - JAPAN 31
SUPPORTING INDUSTRIES EXHIBITION
JP 21 JAPANESE COMPANY
by CLEANVY (Thailand)
Product name: Cleaning system
Use for: Cleaning products
Minimum lot: 1 set
Material: SOS, Steel, Copper,
plastic.
Purchasing Items
by CLEANVY (Thailand)
Product name: Aluminium Cover Product name: 10% Dish End
Use for: Aluminium Cover for Plate
Washing Tank Use for: Distillation Tank
Minimum lot: 2 pcs Minimum lot: 5 pcs
Material: Aluminium A5083 or Material: SUS304
A5052
Company Profile
Establishment Year : January 1954
Number of Employees : 1,287 ( As of March 31,2015)
Factory Address : Otemachi Financial City North Tower, 1-9-5,
Otemachi, Chiyoda-ku, Tokyo, 100-8070
Factory space (m2) : N/A
Charter Capital (JPY) : 14,500,000,000
Turnover in 2014 (JPY) : 1,934,000,000,000 (consolidated accounts)
Main Technology : Trading
Main Customers : N/A
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. Fumio Otake / Ms. Pham Thi Ngoc Tram
Position : Chief of Representative / Sales Coordinator
Address (Office) : Saigon Trade Center, Unit 1112 37 Ton Duc Thang Street,
District 1, Hochiminh City, vietnam
Tel : +84 - 8-3910 1986, HP/+84 - 90879 1168
Fax : +84 - 8-3910 1987
Email : ptntram@jfe-shoji-ele.com.vn
Website : http://www.jfe-shoji-ele.co.jp/
32 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 22
JTEC HANOI CO., LTD
The cables and the electronic components of wire harness and electric control equipment which is
used for construction machinery and industrial machinery.
Company Profile
Establishment Year : 2007
Number of Employees : 600
Factory Address : P-14 Thang Long Industrial Park, Dong Anh District, Hanoi, Vietnam
Factory space (m2) : 7,650
Charter Capital (USD) : 9,000,000
Turnover in 2014 (USD) : 17,750,000
Main Technology : Manufacture and sale of wire harnesses
Main Customers : KOMATSU KOBELCO
Quality Certificates : N/A
Other information : Related plant in Dalian, China
Contact Information
Person in charge : Mr. HA TRONG HUNG
Position : Production Manager
Address (Office) : P-14 Thang Long Industrial Park,Dong Anh District,
Hanoi, Vietnam
Tel : +84 - 43-955 0209
Fax : +84 - 43-955 0210
Email : hung@jtechanoi.com.vn
Website : http://www.toa-ele.co.jp
VIETNAM - JAPAN 33
SUPPORTING INDUSTRIES EXHIBITION
JP 23 JAPANESE COMPANY
Selling Items
Product name: Terminals and Product name: MCCB
Connectors Use for: N/A
Use for: N/A Minimum lot: N/A
Minimum lot: N/A Material: N/A
Material: N/A
Purchasing Items
Product name: Electric Cables Product name: Other
and Wires Electronics Equipments
Use for: N/A Use for: N/A
Minimum lot: N/A Minimum lot: N/A
Material: N/A Material: N/A
Company Profile
Establishment Year : 2009
Number of Employees : 7
Factory Address : N/A
Factory space (m2) : N/A
Charter Capital (USD) : N/A
Turnover in 2014 (USD) : 2,000,000
Main Technology : N/A
Main Customers : N/A
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. Takeshi Nagata
Position : General Director
Address (Office) : 3rd Floor, PDD Office Building,162 Pasteur St,
Ben Nghe Ward, Dist 1, HCMC, Vietnam
Tel : +84 - 8-3822 8560
Fax : +84 - 8-3827 7904
Email : takeshi_nagata@kanetuu.co.jp
Website : http:// www.kanetsu.com.vn
34 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 24
KOM VIETNAM CO., LTD
We’re Metal Machining Company. We need material, Heat Treating, Surface Treating & Gear Cutting
supplier.
Selling Items
Product name: Jig from 1pc Product name: Small lot many
Use for: Customer’s processing jig kinds Parts Machining
Minimum lot: 1 pc Use for: Industrial Machine
Material: SS, SC, SUS, Al, Br, Minimum lot: 1 pc
POM, MC Nylon etc. Material: SS, SC, SUS, Al, Br,
POM, MC Nylon etc.
Product name: Mass production
machining
Use for: Customer’s production
Minimum lot: 5,000 pcs
Material: SS, SC, SUS, Al, Br,
POM, MC Nylon etc.
Purchasing Items
Product name: Gear Cutting Product name: Surface
Use for: Gear Treatment
Minimum lot: 1 pc Use for: Many kinds of parts
Material: SK4 etc Minimum lot: 1 pc
Material: SS400 etc
Company Profile
Establishment Year : 2011
Number of Employees : 52 (included 2 Japanese)
Factory Address : Plot17B, Quang Minh Industrial Zone, Me Linh Distrit, Hanoi, Vietnam
Factory space (m2) : 960
Charter Capital (USD) : 400,000
Turnover in 2014 (USD) : N/A
Main Technology : Lathe & Milling Machining for Metal Parts
Main Customers : N/A
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. Tsuyoshi Iwasaki
Position : General Director
Address (Office) : Plot17B, Quang Minh Industrial Zone, Me Linh Distrit, Hanoi, Vietnam
Tel : +84-4-3959-0292
Fax : +84-4-3959-0294
Email : iwasaki@kom-vn.com
Website : http://fact-link.com.vn/home/komvn
VIETNAM - JAPAN 35
SUPPORTING INDUSTRIES EXHIBITION
JP 25 JAPANESE COMPANY
Selling Items
Product name: Rubber Rollers Product name: Protectors
Use for: Printer, fax machines Use for: Motorbike, automobile
Minimum lot: 2 millions pcs Minimum lot: 300K pcs
Material: Iron shaft, Plastic Material: Silicon
shaft
Purchasing Items
Product name: Iron shafts Product name: Silicon,
Use for: Printer, fax machines chemicals
Minimum lot: N/A Use for: Motorbike, automobile
Material: iron and others
Minimum lot: N/A
Material: Silicon, chemicals
Product name: Plastic shafts
Use for: Printer, fax machines
Minimum lot: N/A
Material: Plastic
Company Profile
Establishment Year : 2004
Number of Employees : 250
Factory Address : Tan Quang, Van Lam District, Hung Yen Province, Vietnam
Factory space (m )
2
: 12,500
Charter Capital (USD) : 3,400,000
Turnover in 2014 (USD) : 8,745,000
Main Technology : Rubber mixing, pressing and grinding
Main Customers : Canon Vietnam, Canon Hi-tech,Canon Business Machines,
Brother Industries (Vietnam), Diamond Electric, CKD Corporation,Iko Thompson Vietnam,...
Quality Certificates : ISO 9001:2008 ISO 14001:2004
Contact Information
Person in charge : Mr. Higuchi Motoharu
Position : Factory Manager
Address (Office) : Tan Quang, Van Lam District, Hung Yen Province, Vietnam
Tel : + 84 - 321 - 3791 563 (ext 5 )
Fax : + 84 - 321 - 3791 573
Email : k-fm@ktc-hn.com
Website : http://twoone.jp / www.fact-link.com.vn/home/ktcvn
36 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 26
KYOEI DIETECH VIET NAM CO., LTD
We are looking for suppliers in the field of manufacturing molds and Jig technology
We provide various type of press die , jig as well as repairing and maintenance services
Selling Items
Product name: Ananuki mold Product name: Compando mold
Use for: FPC Use for: PCB, electronic
Minimum lot: customer request components.
Material: Iron Minimum lot: customer request
Material: Iron
Company Profile
Establishment Year : 2005
Number of Employees : 32 peoples (1 Japan ), < February, 2015>
Factory Address : Unit 5, Plot N-1, Thang Long Apartment Factory
Thang Long Industrial Park, Dong Anh district, HaNoi.
Factory space (m )
2
: 495
Charter Capital (USD) : 700,000
Turnover in 2014 (USD) : 1,436,846
Main Technology : Design, manufacture of dies, jigs, Machining die set (out-in), Design Cad / cam
Main Customers : SEI Electronic components (Vietnam) Co.,LTD, Chiyoda Integre
Vietnam Co.,LTD , Meiko Electronics Vietnam Co.,LTD
Quality Certificates : ISO9001 (2000)
Other information : With a staff of qualified, enthusiastic and eager to learn, many of
whom have been involved in the training at main company in Japan, we believe that we can
provide the products and services at highest quality to our customers.
Contact Information
Person in charge : Mr. AKIHIRO KOBAYASHI
Position : Director
Address (Office) : Unit 5, Plot N-1, Thang Long Apartment Factory
Thang Long Industrial Park, Dong Anh district, Ha Noi.
Tel : +84 - 4-3951 6388
Fax : +84 - 4-3951 6389
Email : kdv@kpg.jp
Website : http://vtown.vn/company/kyoei-dietech-vietnam.html
VIETNAM - JAPAN 37
SUPPORTING INDUSTRIES EXHIBITION
JP 27 JAPANESE COMPANY
Selling Items
Product name: Plastic Mold
Parts
Use for: Automobiles
Minimum lot: Approx. 1,000pcs
Material: PBT,PPS,PA66 etc
Purchasing Items
Product name: Plating Product name: Bush
Use for: N/A Use for: N/A
Minimum lot: N/A Minimum lot: N/A
Material: Au, Sn, Ni, Cu etc Material: Metal
Company Profile
Establishment Year : Nov. 2011
Number of Employees : 137
Factory Address : Road A5,Pho Noi A Industrial Park, Dinh Du Commune,
Van Lam district Hung Yen Province, Viet Nam
Factory space (m2) : 5,000
Charter Capital (USD) : 8,750,000
Turnover in 2014 (USD) : 4,872,000
Main Technology : Production of Precision Stamping Parts.
Insert Molding Parts and Molding Parts.
Main Customers : DENSO, Sumitomo Denso
Quality Certificates : N/A
Other information : We produce automobile parts with dies manufactured by applying
state-of-the-art technology and skills.
Contact Information
Person in charge : Mr. Yudai Hiramoto
Position : Sales manager
Address (Hanoi Office) : 564-1 , Handa Tsu, Mie, 514-0823 Japan
Tel : +81-59-228-0103
Fax: : +81-59-383-1148
Email : hiramoto@miekin.co.jp
Website : http://www.miekin.co.jp
38 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 28
MINATO RUBBER VIETNAM CO., LTD
We look for customer and rubber molding company
We also look for the rubber matterial suppliers and rubber manufacturing suppliers
Company Profile
Establishment Year : 2013
Number of Employees : 14
Factory Address : Dong Van II IZ , Duy Tien district , Ha nam province, Vietnam
Factory space (m2) : 2,100
Charter Capital (USD) : 10,000
Turnover in 2014 (USD) : 200,000
Main Technology : Rubber manufacturing
Main Customers : MINATO RUBBER CO.,LTD
Quality Certificates : Plan
Other information : N/A
Contact Information
Person in charge : Mr. TAKESHI SATO
Position : General Director
Address (Office) : Dong Van II IZ , Duy Tien district ,
Ha nam province, Vietnam
Tel : + 84 - 351 - 6262 155
Fax : N/A
Email : mrv-take.sato@minato-g.co.jp
Website : http://www.minato-g.co.jp
VIETNAM - JAPAN 39
SUPPORTING INDUSTRIES EXHIBITION
JP 29 JAPANESE COMPANY
Purchasing Items
Product name: Cover Product name: Pipe
Use for: Pump Use for: Pump
Minimum lot: 300 pcs Minimum lot: 200 pcs
Material: FC200 Material: FC200
Company Profile
Establishment Year : 1954
Number of Employees : 14
Factory Address : 4-5, Kuban-cho, Minato Ward, Nagoya City, Aichi Prefecture, Japan
Factory space (m2) : 1,085
Charter Capital (USD) : 583,000
Turnover in 2014 (USD) : 5,392,400
Main Technology : Casting, Machining
Main Customers : PUMP, VALVE, MOTOR, etc
Quality Certificates : N/A
Other information : Source Castings, Lost Wax, Machining, and OEM products from abroad (China, Vietnam).
Contact Information
Person in charge : Mr. WAKATO YAMADA
Position : Senior Managing Director
Address (Office) : 4-5, Kuban-cho, Minato Ward, Nagoya City, Aichi Prefecture, Japan
Tel : +81-52-651 5491
Fax : +81-52-651 5499
Email : wakato.yamada@nagoyakatan.com
Website : http:// www.nagoyakatan.com
40 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 30
NOBLE ELECTRONICS VIETNAM CO., LTD
NOBLE participates in customers’ product development efforts from the planning stage. Through
collaboration between engineers, putting aside the differences in their perspectives, we seek ever
higher levels and, under our integrated production system, realize clashing objectives between cost,
speed and quality.
Selling Items
Product name: Potentiometer Product name: Encoder
XV092,12 series XRE012 series
Use for: Audio mixer, Audio Use for: Digital device
amplifier Minimum lot: N/A
Minimum lot: N/A Material: N/A
Material: N/A
Product name: Push switch Product name: Custom product
(Latching) SF06 series for automotive parts, IB-CE series
Use for: Auto cruise, Hazard &Fog Use for: Mirroe angle memory,
lamp switch for automobile Headlight leveling switch
Minimum lot: N/A Minimum lot: N/A
Material: N/A Material: N/A
Product name: Custom product Product name: Cement product
for home electrical products for circuit protection, RGC,
Use for: Digital still camera, RMH RNF and RKF series etc
Camcorder and mobile phone Use for: Power supply
Minimum lot: N/A Minimum lot: N/A
Material: N/A Material: N/A
Company Profile
Establishment Year : 2006
Number of Employees : 500
Factory Address : Hoa Lac Hi-Tech Park, Thach That District , Hanoi, Vietnam
Factory space (m2) : 30,000
Charter Capital (USD) : 4,999,000
Turnover in 2014 (USD) : 27,000,000
Main Technology : Electronic components
Main Customers : Panasonic, Sony, Nikon, Samsung…
Quality Certificates : ISO 9001:2008 ISO 14001:2004
Other information : Design, function, reliability…
By steadily focusing on the ever-diversifying needs of the times, we
provide support for evolving electronic devices.
Contact Information
Person in charge : Ms. Du Thi Loan
Position : Senior Manager
Address (Office) : Hoa Lac Hi-Tech Park, Thach That District , Hanoi, Vietnam
Tel : +84 - 43 - 3688 525
Fax : +84 - 43 - 3688 521
Email : loandu-nev@gmail.com
Website : http://www.noble-j.co.jp/
VIETNAM - JAPAN 41
SUPPORTING INDUSTRIES EXHIBITION
JP 31 JAPANESE COMPANY
Purchasing Items
Product name: plywood Product name: resin plate
Use for: Thomson-based Use for: Thomson-based
Minimum lot: 1 pc Minimum lot: 1 pc
Material: Basswood Material: PC,PET,PVC
Company Profile
Establishment Year : 2011
Number of Employees : 60
Factory Address : Unit27,Piot N-1,Thang Long Industrial Park,
Dong Anh district, Hanoi, Vietnam
Factory space (m2) : 1000
Charter Capital (USD) : 100,000
Turnover in 2014 (USD) : 1,250,000
Main Technology : Thomson-die, Chrom-die
Main Customers : N/A
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. TOSHIAKI KOJIMA/ Mr. NGUYEN VAN HOI
Position : Managing Director / Sales Staff
Address (Office) : Unit27,Piot N-1,Thang Long Industrial Park,
Dong Anh district, Hanoi, Vietnam
Tel : +84 - 4- 3959 0240
Fax : +84 - 4 -3959 0238
Email : noda-vietnam@kigataya.com
Website : http://kigataya.com
42 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 32
O.N TECHNO VIETNAM CO., LTD
We look for the suppliers in a field of Lost-wax, Die casting, Forging, Sheet Metal technology and
other machine parts
Selling Items
Product name: VcuumCapper Product name: A great variety
Use for: N/A of machine parts
Minimum lot: 1 pc Use for: N/A
Material: N/A Minimum lot: 1 pc
Material: N/A
Purchasing Items
Product name: Lost-wax Product name: Forging
Use for: N/A Use for: N/A
Minimum lot: 100 pcs Minimum lot: 100 pcs
Material: Stainless steel Material: Aluminum
Company Profile
Establishment Year : 2014
Number of Employees : 10
Factory Address : Thua dat 65, ban do47, Ho town,Thuan Thanh district,
Bac Ninh province, Vietnam
Factory space (m ) 2
: 600
Charter Capital (USD) : 100,000
Turnover in 2014 (USD) : N/A
Main Technology : It is produced the industrial
Main Customers : Our Hed Office (JP)
Quality Certificates : N/A
Other information : We accept all the small-slot orders, single items of milling and lathe
machines. The “vacuum camper” we introduce in this exhibiton is a space-saving device, can be easily
operated, no need to have special knowledges on machining techniques. Feel free to take a look on our “vacuum camper” and if
you have interest, you can try operating it. We are expecting to seeing you.
Contact Information
Person in charge : Mr.TAKESHI NAKAI / Mr. NGUYEN VAN HOACH
Position : Representative Director / Factory manager
Address (Office) : Thua dat 65, ban do47, Ho town,Thuan Thanh district,
Bac Ninh province, Vietnam
Tel : +84 - 241- 3775 326
Fax : +84 - 241- 3775 326
Email : t-nakai@on-techno.jp / vietnam@on-techno.jp
Website : http://www.on-techno.jp
VIETNAM - JAPAN 43
SUPPORTING INDUSTRIES EXHIBITION
JP 34 JAPANESE COMPANY
Selling Items
Product name: mechanical hand Product name: cut turning
A’ssy sample
Use for: industrial robot Use for: camflower
Minimum lot: 1 pc Minimum lot: 50 pcs
Material: steel etc… Material: steel
Purchasing Items
Product name: auto inspection Product name: virtual
machine machiningcenter sample
Use for: automobile parts etc.. Use for: industrial equipment
Minimum lot: 1 pc Minimum lot: 1 pc
Material: N/A Material: aluminum
Company Profile
Establishment Year : 1946
Number of Employees : 83 (japan) 100 (global)
Factory Address : 418, Miyamuro, Hirobaba, Shinto-Mura, Kitagunma-Gun,Gunma Pref.,370-3504, Japan
Factory space (m2) : 4,700
Charter Capital (JPY) : 30,000,000
Turnover in 2012 (JPY) : 1,000,000,000
Main Technology : cutting steels
Main Customers : N/A
Quality Certificates : ISO9001:2008
Other information : N/A
Contact Information
Person in charge : Mr. OGINO OSAMU
Position : President
Address (Office) : 418, Miyamuro, Hirobaba, Shinto-Mura,
Kitagunma-Gun,Gunma Pref.,370-3504,Japan
Tel : +81 - 279 54 4011
Fax : +81- 279 54 1681
Email : osamu-o@ogisei.com
Website : http://www.ogisei.com
44 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 35
Selling Items
Product name: Cation ED Product name: Cation ED
Coating Coating(Bracket)
Use for: Automobile Parts Use for: Automobile Parts
Minimum lot: 1,000 pcs Minimum lot: 1,000 pcs
Material: N/A Material: N/A
Purchasing Items
Product name: Pad Product name: Pin
Use for: Accelerator Pedal Use for: Accelerator Pedal
Minimum lot: 10,000 pcs Minimum lot: 10,000 pcs
Material: Polypropylene, Material: Stainless Steel
Aluminium
Company Profile
Establishment Year : 2013
Number of Employees : 16
Factory Address : Binh Xuyen IZ, Huong Canh Commune,
Binh Xuyen District, Vinh Phuc, Vietnam
Factory space (m )
2
: 2,680
Charter Capital (USD) : 3,580,000
Turnover in 2014 (USD) : N/A
Main Technology : Automobile Parts Manufacturing, Round Bar Press, Cation ED Coating
Main Customers : Denso Manufacturing Vietnam
Quality Certificates : N/A
Other information : Our headquarters, Ohashi Iron Works in Japan has business with
Toyota Mortor Corporation as Tier-1 supplier nearly 100 years.
Contact Information
Person in charge : Mr. Takaaki Kojima
Position : General Director
Address (Office) : Binh Xuyen IZ, Huong Canh Commune,
Binh Xuyen District, Vinh Phuc, Vietnam
Tel : +84 -211-3888 084
Fax : +84 -211-3888 085
Email : t-kojima@ohashi-tekko.co.jp
Website : http://www.ohashi-tekko.vn
VIETNAM - JAPAN 45
SUPPORTING INDUSTRIES EXHIBITION
JP 36 JAPANESE COMPANY
Selling Items
Product name: Gas cooker
Use for: N/A
Minimum lot: 4000 pcs
Material: Iron, Steel, Brass
Purchasing Items
Product name: Pipe Product name: Panel seal
Use for: Gas cooker Use for: Gas cooker
Minimum lot: 5,000 pcs Minimum lot: 2,000 pcs
Material: Steel pipe, Zn plating, Material: Plastic, nilon
Company Profile
Establishment Year : July in 2014
Number of Employees : 232
Factory Address : No. 114-116, No.6 Road, VSIP Hai Phong, Township Industrial and
Service Park,Dinh Vu – Cai Hai Economic Zone, Hai Phong city, Vietnam
Factory space (m2) : 15,283
Charter Capital (USD) : 12,000,000
Turnover in 2014 (USD) : Have not yet
Main Technology : Gas cooker technology
Main Customers : Phu Thai Group & Mekong Group
Quality Certificates : TCCS 01:2015/PLM
Other information : Paloma Company is one of the most leading company in the world
about manufacturing equipments utilize Gas and Gas Stove, Headquartered in Japan. Paloma
Vietnam Company is manufacturing many gas Stoves and is being sell to Vietnam market. Gas Stove of Paloma is
integrated burn tip which saving fuel and system will off by itself when have wind or water flow up. It is safe to utilize.
We hope to keep always warmly flame in kitchens of Vietnam family.
Contact Information
Person in charge : Mr. Furumura Kenichi
Position : General Director
Address (Office) : No. 114-116, No.6 Road, VSIP Hai Phong, Township
Industrial and Service Park,Dinh Vu – Cai Hai Economic Zone, Hai Phong city, Vietnam
Tel : +84 - 0312 299 010
Fax : +84 - 0312 299 011
Email : kenichi.furumura@paloma.co.jp
Website : http://www.palomaglobal.com
46 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 33
PANASONIC VIETNAM CO., LTD
Our purchasing Items are Electronic/Electric and spare parts for System Network, Home appliance,
Industrial devices for Panasonic products
Purchasing Items
Product name: Panel Product name: Tube drain
Use for: Door camera BL267
Minimum lot: 5,000 pcs Use for: Refrigerator
Material: plastic, painting process Minimum lot: 40,000 pcs
Material: HDPE 5502
Company Profile
Establishment Year : 1918
Number of Employees : 254,084 (Consolidated)
Factory Address : 1006, Kadoma, Kadoma-shi, Osaka 571-8501, Japan (Head office)
Factory space (m2) : N/A
Charter Capital (USD) : 2,464,000,000 (303 billion yen, 1USD = 123YEN)
Turnover in 2014 (USD) : 63,008,000,000 (7,750 billion yen, 1USD=123YEN)
Main Technology : Comprehensive electronics manufacturer: production, sales, and services for products
ranging from electronic component to home electronic equipment, electrical appliances, factory automation (FA)
equipment, information/communications equipment, and housing equipment.
Main Customers : N/A
Quality Certificates : ISO9001, ISO14001
Other information : N/A
Contact Information
Person in charge : Ms. Hoang Thu Thuy
Position : Procurement Assistant Manager of Procurement Group,
Panasonic Vietnam Co., LTD
Address (Office) : Plot J1-J2 Thang Long Industrial park,
Dong Anh District, Hanoi, Vietnam
Tel : +84 - 4 - 3955 0111/12/13 Ext: 1217
Fax : +84 - 4 - 3955 0144
Email : thuthuy.hoang@vn.panasonic.com
Website : http://panasonic.net
VIETNAM - JAPAN 47
SUPPORTING INDUSTRIES EXHIBITION
JP 37 JAPANESE COMPANY
Company Profile
Establishment Year : 2008
Number of Employees : 65
Factory Address : Binh Xuyen Industrial Park, Vinh Phuc Province, Vietnam
Factory space (m2) : 10,000
Charter Capital (USD) : 800,000
Turnover in 2014 (USD) : 2,000,000
Main Technology : Precision machining parts and Heat treatment
Main Customers : Japan, Vietnam, China, Taiwan
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. HIDEO MURAI
Position : Director
Address (Office) : Binh Xuyen Industrial Park, Vinh Phuc Province, Vietnam
Tel : +84 - 211-3593 939
Fax : +84 - 211-3593 838
Email : murai@v-prec.co.jp
Website : http://www.v-prec.co.jp
48 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 38
PRINTEC OHTOMI CO., LTD
We look for the suppliers in a field of printing, packaging material and equipment.
Die-cut knife, adhesive material, Ink, rubber roller, washing brush, washing cloth or paper, w-tape,
carton box, PVC plate, anti-static brush, static eliminator, etc.
Selling Items
Product name: Multi color label Product name: In Mold Label
Use for: Packaging etc Use for: Plastic bottle
Minimum lot: 10,000 pcs Minimum lot: 100,000 pcs
Material: Paper, Film, PET, PE, Material: YUPO
PVC, synthetic paper
Purchasing Items
Product name: Die cut knife Product name: Anilox Roll
Use for: Die cut for labels Use for: Flexso printing
Minimum lot: N/A machine part
Material: PVC plate, Thomson Minimum lot: N/A
blade Material: Ceramic, aluminum
Company Profile
Establishment Year : 2013
Number of Employees : 70
Factory Address : No7, Street 3A, VSIP Bac Ninh, Tu Son Town,
Bac Ninh Province, Vietnam
Factory space (m2) : 2,000
Charter Capital (USD) : 1,000,000
Turnover in 2014 (USD) : N/A
Main Technology : Printing for multi color label
Main Customers : Auto Mobile Manufacture, Bottle molder
Quality Certificates : N/A
Other information : We are the specialist of printing multi color label, seal.
Our products are general labels for packaging, In Mold Label for plastic lubricant bottle, etc.
Contact Information
Person in charge : Mr. AKIYAMA TUSYOSHI
Position : Director
Address (Office) : No7, Street 3A, VSIP Bac Ninh, Tu Son Town,
Bac Ninh Province, Vietnam
Tel : +84 - 241 - 376 5057
Fax : +84 - 241- 376 5059
Email : info@printec-ohtomi.com
Website : http://www.printec-ohtomi.com
VIETNAM - JAPAN 49
SUPPORTING INDUSTRIES EXHIBITION
JP 39 JAPANESE COMPANY
Selling Items
Product name: Precision plastic Product name: Injection molds
parts Use for: injection molding
Use for: various production
Minimum lot: 1,000 pcs Minimum lot: 1 pc
Material: Plastic Material: metal
Purchasing Items
Product name: Battery, Product name: Glass
Magnet, Electric Wire, Packing Use for: Clock
Materials… Minimum lot: 1,000 pcs
Use for: Clock Material: various
Minimum lot: 1,000 pcs
Material: various
Company Profile
Establishment Year : 2006
Number of Employees : 595
Factory Address : Lot 42+87A, Noi Bai Industrial Zone, Hanoi
Factory space (m2) : 9,260m2 + 7,325m2
Charter Capital (USD) : 20,000,000
Turnover in 2014 (USD) : 24,600,000
Main Technology : Plastic Injection Molding
Main Customers : Canon, Itsuwa, Kyocera, Yamaha, Minebea
Quality Certificates : ISO9001:2008
Other information : N/A
Contact Information
Person in charge : Mr. Phan Quang Chien
Position : Vice Factory Manager
Address (Office) : Lot 42+87A, Noi Bai Industrial Zone, Soc Son, Hanoi
Tel : +84 - 4 - 3582 1661
Fax : +84 - 4 - 3582 1662
Email : phan.chien@rhythmvn.com
Website : http://rhythm.co.jp
50 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 40
RICOH IMAGING PRODUCTS (Vietnam) CO., LTD
We are looking for reliable vendors for Processed Metal, Printed Circuit Board, Pressed Parts and
more…
Purchasing Items
Product name: Big Processed Product name: Small Processed
Metal Parts Metal Parts
Use for: Interchangeable Lenses Use for: Interchangeable Lenses
Minimum lot: 500-1,000 pcs Minimum lot: 500-1,000 pcs
Material: Aluminum Material: Aluminum
Company Profile
Establishment Year : 1995
Number of Employees : 1,000
Factory Address : Plot A7, Sai Dong B Industrial Zone, Long Bien District, Ha Noi
Factory space (m2) : 35,000
Charter Capital (USD) : 11,000,000
Turnover in 2014 (USD) : 37,721,000
Main Technology : Processing Optical Lenses / Metal Parts for DSLR Camera & Lenses;
Assembly of DSLR Camera Body, Interchangeable Lenses and
CCTV Lens Unit
Main Customers : Japan, EU, USA
Quality Certificates : ISO 9001
Other information : N/A
Contact Information
Person in charge : WATANABE Hiroshi
Position : Deputy General Director
Address (Office) : Plot A7, Sai Dong B Industrial Zone,
Long Bien District, Ha Noi
Tel : +84-4-3875-0418
Fax : +84-4-3875-0421
Email : hiroshi.watanabe@vn.ricoh-imaging.com
Website : N/A
VIETNAM - JAPAN 51
SUPPORTING INDUSTRIES EXHIBITION
JP 41 JAPANESE COMPANY
Selling Items
Product name: Bearing holder Product name: mold parts
Use for: Generator Use for: mold pattern
Minimum lot: 80 pcs Minimum lot: N/A
Material: cast iron Material: Steel
Company Profile
Establishment Year : 2002/OCT
Number of Employees : 100
Factory Address : Plot D2 and D3A Thang Long Industrial Park,
Dong Anh district, hanoi, vietnam
Factory space (m2) : 17,560
Charter Capital (USD) : 5,000,000
Turnover in 2014 (USD) : 3,600,000
Main Technology : Machining
Main Customers : HONDA VN, TIEV, TSUKUBA VN, MIKASA, SUMITOMONACCO VN
Quality Certificates : ISO9001: 2008
Other information : To complete processing from material procurement
Contact Information
Person in charge : Mr. NOBORU MURAGUCHI
Position : General Director
Address (Office) : Plot D2 and D3A Thang Long Industrial Park,
Dong Anh district, hanoi, vietnam
Tel : +84 - 4-38812 245
Fax : +84 - 4-38812 247
Email : noboru_muraguchi@sakurai-net.co.jp
Website : http://www.sakurai-net.co.jp
52 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 42
SHIOGAI SEIKI VIETNAM CO., LTD
We can provide Design & Processing & Assembly many kind of machines and automated machines
Selling Items
Product name: Shaft Product name: Slide Bar
Use for: Jig Use for: Automatic Machine
Minimum lot: 1~10 Pcs Minimum lot: 1~10 Pcs
Material: SUS304 Material: S50C
Company Profile
Establishment Year : 2004
Number of Employees : 242
Factory Address : 224/4, Road 24-2, Amata IP, Long Binh Ward, Bien Hoa District,
Dong Nai province, Vietnam
Factory space (m )
2
: 4,677
Charter Capital (USD) : 3,000,000
Turnover in 2014 (USD) : 4,700,000
Main Technology : Processing machinery parts,Processing Jig.Design for Factory
equipment Machine,Automation machines & Jigs,and Assembly
Main Customers : Canon Vietnam; Maruei Vietnam; etc…..
Quality Certificates : ISO9001: 2008
Other information : Surface finishing (Nikel, Alumite, Uni-Chromate, Teflon,…), Heat
Treatment (General heat treatment, Vacuum quenching, Carburizing, Induction Hardening,
Nitriding), Maintenance of manufacturing machines
Contact Information
Person in charge : Mr. NAGAI SEIICHI
Position : Manager
Address (Office) : 224/4, Road 24-2, Amata IP, Long Binh Ward,
Bien Hoa District, Dong Nai province, Vietnam
Tel : +84 - 61 - 3936450~453
Fax : +84 - 61 - 3936454
Email : kedo@shiogai.co.jp
Website : http:// Shiogaiseikivietnam.com
VIETNAM - JAPAN 53
SUPPORTING INDUSTRIES EXHIBITION
JP 43 JAPANESE COMPANY
Selling Items
Product name: Air dryer
Use for: instrument air system
Minimum lot: 01 set
Material: Steel
Purchasing Items
Product name: Desiccant Product name: Check Valves
Use for: Air dryer Use for: Air dryer
Minimum lot: N/A Minimum lot: 10 pcs
Material: Alumina Material: Bronze Alloy
Company Profile
Establishment Year : August 9th, 1957
Number of Employees : Nearly 100 persons
Factory Address : 2-21-19 Nakacho, Toda, Saitama 335-0012
Factory space (m2) : 1,215.37
Charter Capital (USD) : 600,000
Turnover in 2012 (USD) : 1,500,000
Main Technology : Air/Gas Dryer Manufacturing
Main Customers : Semiconductor Plants, Power Plants…
Quality Certificates : ISO 9001, JIS Q 9001
Other information : SHIRAKAWA SEISAKUSHO is the leading Japanese company which
has over 60 years of experience in dehumidifying equipment, with
the record sale of more than 10,000 units in over 40 countries.
Contact Information
Person in charge : Mr. Takaaki Seki
Position : Chief
Address (Office) : 2-21-19 Nakacho, Toda, Saitama 335-0012
Tel : 048-432-0901
Fax : 048-432-0474
Email : air-gas@dryer.co.jp
Website : http://www.dryer.co.jp
54 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 44
SISIKU ADDKREIS CORPORATION
We look for the suppliers who manufacture the parts and components for our castors & wheels and
hand trucks, and also the buyers for our finished products.
Selling Items
Product name: Castors Product name: Industrial hand
Use for: Industrial hand trucks, etc. trucks
Minimum lot: TBN Use for: Material handling
Material: Steel bracket and Minimum lot: TBN
steel core with rubber and Material: Steel and plastic
polyurethane rubber tread, etc. parts.
Purchasing Items
Product name: Ball bearings Product name: Bracket (Yoke)
Use for: Wheels for castors Use for: Fixed castors
Minimum lot: 30,000 pcs Minimum lot: 4,000 pcs
Material: Steel and Stainless Material: Steel
steel
Company Profile
Establishment Year : 1945
Number of Employees : 55
Factory Address : Ru-17, Sakado, Tsubata-machi, Kahoku-gun, Ishikawa-pref.
929-0417 JAPAN
Factory space (m2) : 4,099
Charter Capital (USD) : 252,320
Turnover in 2014 (USD) : 7,346,000
Main Technology : Manufacturing compact heavy-duty castors, shock absorbing castors,
and many other user-friendly products.
Main Customers : Automobile industry
Quality Certificates : ISO9001: 2008
Other information : We’re looking for a possible business partner who duly understands
the superiority and the merits of made-in-Japan products, and also a potential buyer who desires
to work as the distributor for our products in the local market for material handling equipment.
Contact Information
Person in charge : Mr. M.Eida
Position : Sub-leader
Address (Office) : MARUSHO BLDG. 1-16-15, Nagadohe, Kanazawa
920-0867 JAPAN
Tel : +81-76-221 0449
Fax : +81-76-223 0449
Email : eida@sisiku.com
Website : http://www.sisiku.com
VIETNAM - JAPAN 55
SUPPORTING INDUSTRIES EXHIBITION
JP 45 JAPANESE COMPANY
削除
Minimum lot: 600 pcs Use for: Industrial machine
Material: SUS304
削除 Minimum lot: 600 pcs
Material: SUS304
Company Profile
Establishment Year : 2012
Number of Employees : 5
Factory Address : N/A
Factory space (m2) : N/A
Charter Capital (USD) : 200,000
Turnover in 2014 (USD) : N/A
Main Technology : Trading
Main Customers : Hoshizaki electric, Taico Japan, Toho Precision, etc
Quality Certificates : N/A
Other information : We are trading company in Hanoi. We cooperate with Vietnam
companies to export goods like press, cutting, plastic parts, rubber parts, PU molding, etc and
assembly. We would like to cooperate with the vigorous Vietnam company
Contact Information
Person in charge : Mr. YUTAKA INOUE
Position : General Director
Address (Office) : 29 Vu Pham Ham street, Yen Hoa ward,
Cau Giay district, Ha Noi, Vietnam
Tel : +84 - 4 - 3783 5618
Fax : +84 - 4 - 3783 5619
Email : inoue@taico.co.jp
Website : http://www.taico.co.jp
56 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 46
Tamron OPTICAL(VIETNAM) CO., LTD
We look for the suppliers which manufacture and sell products relating to optical lenses.
Company Profile
Establishment Year : 04 May 2012
Number of Employees : 1,077
Factory Address : Plot No.69B &70A, Noi Bai Industrial Zone
Mai Dinh Commune, Soc Son District, Ha Noi, Viet Nam.
Factory space (m2) : 13,400
Charter Capital (USD) : 14,000,000
Turnover in 2014 (USD) : 33,220,783
Main Technology : Optical Lenses
Main Customers : Original brand Production
Quality Certificates : ISO 9001:2008, ISO 14001: 2004
Other information : N/A
Contact Information
Person in charge : Mr. Doan ( Vietnam/ English); Mr. Suzuki (Japan)
Position : A.Manager
Address (Office) : Plot No.69B &70A, Noi Bai Industrial Zone
Mai Dinh Commune, Soc Son District, Ha Noi, Viet Nam.
Tel : +84 - 4 - 3762 1759
Fax : +84 - 4 - 3762 1758
Email : Hideaki-Suzuki@tamron.co.jp / d-doan@tamron.co.jp
Website : http:// www.tamron.co.jp
VIETNAM - JAPAN 57
SUPPORTING INDUSTRIES EXHIBITION
JP 48 JAPANESE COMPANY
Company Profile
Establishment Year : 2015
Number of Employees : 4
Factory Address : Hanoi and vicinity
Factory space (m ) 2
: 3,000
Charter Capital (USD) : 50,000
Turnover in 2014 (USD) : N/A
Main Technology : Precision machining, sheet metal press, trading company
Main Customers : Via TECHNOTAIYO, each leading manufacturer of Japan
Quality Certificates : N/A
Other information : Our company was established in July 2015. We formerly were a
representative office in September 2013 with 100% investment of TECHNO TAIYO CO., LTD from Sakai city,
Japan. In order to supply machining parts, sheet metal stamping parts, molding parts, casting parts, forging parts, etc… of industrial
machinery, medical equipment, optical equipment, measuring equipment, hydraulic equipment, we have established an office in
Hanoi and had our private processing machines installed in each alliance factory which is directed under the technical guidance and
management of Japanese engineers. Therefore, we are now able to provide products which can satisfy many customers.
Contact Information
Person in charge : Mr.HIROKI ONO (JP) / Mr.LE VAN LOI (VN)
Position : General Director / Staff
Address (Office) : Room 601, 6FL , No2, Hoang Quoc Viet Street ,
Cau Giay district ,Hanoi, Vietnam
Tel : +84 - 9 - 4400 2169 (JP) / + 84 - 9 - 8571 3429 (VN)
Fax : N/A
Email : ono@techno-t.co.jp (JP) / loi@techno-t.co.jp (VN)
Website : http://www.techno-t.co.jp/
58 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY
JP 47
TOHO VIETNAM CO., LTD
We look for die-casting & plastic parts for motor bike / automobile
Selling Items
Product name: Die cast mold for Product name: Die cast mold for
motor bike wheel. motor bike engine cover.
Use for: Motor bike. Use for: Motor bike.
Minimum lot: 1 set Minimum lot: 1 set
Material: DHEX 31, DAC Magic. Material: DHEX 31, DAC Magic.
Company Profile
Establishment Year : 2002
Number of Employees : 180
Factory Address : Plot B1, Thang Long IP, Dong Anh District, Hanoi, Vietnam
Factory space (m2) : 5,985
Charter Capital (USD) : 15,000,000
Turnover in 2014 (USD) : 7,723,537
Main Technology : Plastic injection Mold, Die-cast mold.
Main Customers : Honda, Yamaha, Panasonic, Brother, Canon
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. MITSUO ASAHARA
Position : Executive Vice President
Address (Office) : Plot B1, Thang Long IP, Dong Anh District, Hanoi, Vietnam
Tel : + 84 - 4-3881 1111
Fax : + 84 - 4-3881 1115
Email : m.asahara@toho.com.vn
Website : http://www.toho.ne.jp
VIETNAM - JAPAN 59
SUPPORTING INDUSTRIES EXHIBITION
JP 49 JAPANESE COMPANY
Company Profile
Establishment Year : 1959
Number of Employees : 100
Factory Address : 2155 shiroishi , fujioka city, gunma, japan
Factory space (m2) : N/A
Charter Capital (USD) : 200,000
Turnover in 2014 (USD) : 20,000,000
Main Technology : Metal stamping , plating , mold making
Main Customers : Automobile parts manufacturers
Quality Certificates : ISO 9001:2008
Other information :
Contact Information
Person in charge : Mr. Shinya Toyoda
Position : Manager
Address (Office) : 2155 shiroishi , fujioka city, gunma, japan
Tel : +81 - 274 40 7234
Fax : +81 - 274 40 7118
Email : s-toyoda@toyoda.ne.jp
Website : http://www.toyoda.ne.jp/
60 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 52
TOYOTA MOTOR VIETNAM CO., LTD
We are looking for potential candidate supplier in Viet Nam to supply Parts & Material
for our production Car model in Viet Nam and Export Part to other countries.
Purchasing Items
Product name: Interior Product name: Resin
Use for: Automobile Use for: Automobile
Minimum lot: N/A Minimum lot: N/A
Material: Resin Felt, Polyester Material: PP/PE
Company Profile
Establishment Year : 1995
Number of Employees : 1,850
Factory Address : Phuc Thang ward, Phuc Yen Town, Vinh Phuc Province, Viet Nam
Factory space (m2) : 210,100
Charter Capital (USD) : 89,600,000
Turnover in 2014 (USD) : N/A
Main Technology : Car manufacturing
Main Customers : N/A
Quality Certificates : ISO 140001
Other information : N/A
Contact Information
Person in charge : Mr. Taiga Yamaguchi
Position : TMV ADM& Finance Group Director
Address (Office) : Phuc Thang ward, Phuc Yen Town,
Vinh Phuc Province, Viet Nam
Tel : +84 - 211 - 3868 100 Ext: 2225
Fax : +84 - 211- 3868 188
Email : tyamaguchi@toyotavn.com.vn
Website : http://www.toyotavn.com.vn
VIETNAM - JAPAN 61
SUPPORTING INDUSTRIES EXHIBITION
JP 50 JAPANESE COMPANY
Selling Items
Product name: Diecasting Product name: Diecasting
Use for: Motorbicycles Use for: Motorbicycles
Minimum lot: N/A Minimum lot: N/A
Material: ADC12 Material: ADC12
Purchasing Items
Product name: Sandpaper Product name: Machining tool
Use for: Polishing of the Use for: Machining
product Minimum lot: 100 pcs
Minimum lot: 50,000 pcs Material: N/A
Material: N/A
Company Profile
Establishment Year : 18 December 1995
Number of Employees : 800
Factory Address : Lot A6 Cong Nghiep 4 Road,Sai Dong B Industrial zone,
Long Bien District, Hanoi, Vietnam
Factory space (m2) : 24,145
Charter Capital (USD) : 6,500,000
Turnover in 2014 (USD) : 25,000,000
Main Technology : Diecasting and machining and painting
Main Customers : YAMAHA, HONDA, TOYOTA, SUMITOMO, PANASONIC
Quality Certificates : ISO9001 / ISO14001
Other information : Manufacturing, processing, machining and painting various kind
of Aluminum &Magnesium products .Our Company is capable of handing the demand of your
customers
Contact Information
Person in charge : Mr. SUSUMU OSAWA
Position : General director
Address (Office) : Lot A6 Cong Nghiep 4 Road,Sai Dong B Industrial zone,
Long Bien District, Hanoi, Vietnam
Tel : +84 - 43 - 875 9759
Fax : +84 - 43 - 875-9889
Email : tdv@tsukubavn.com
Website : http:/www.tsukuba-dc.co.jp/
62 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 51
V-HONEST CO., LTD
We are a maker specializing in metalwork.
Our purchasing Items is SS400 square steel bar.
Selling Items
Product name: Radiator Product name: Filter
Use for: Train Use for: Train
Minimum lot: 1 pc Minimum lot: 1 pc
Material: Steel Material: Steel
Company Profile
Establishment Year : 2012
Number of Employees : 30
Factory Address : TS11 Str Tien Son, Hoan Son, Tien Du District,
Bac Ninh Province, Vietnam
Factory space (m2) : 1,400
Charter Capital (USD) : 300,000
Turnover in 2014 (USD) : 250,000
Main Technology : Welding, Cutting work, Drilling, Sheet-metal working
Main Customers : J-HONEST., LTD
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. Jinichi Suzuki
Position : Advisor
Address (Office) : TS11 Str Tien Son, Hoan Son, Tien Du District,
Bac Ninh Province, Vietnam
Tel : + 84 - 241- 373 4730
Fax : + 84 - 241- 373 4740
Email : suzuki51228@vhonest.com.vn
Website : N/A
VIETNAM - JAPAN 63
SUPPORTING INDUSTRIES EXHIBITION
JP 53 JAPANESE COMPANY
Company Profile
Establishment Year : 2011
Number of Employees : 28
Factory Address : Unit 6, Plot N-1, Thang Long Apartment Factory, Thang Long I.P,
Dong Anh district, Hanoi, Vietnam
Factory space (m2) : 500
Charter Capital (USD) : 890,000
Turnover in 2014 (USD) : 666,600
Main Technology : Design, manufacture and maintenance precision mold; Design,
manufacture anh maintenance precision parts of mold; Plastics injection molding.
Main Customers : Daiwa Plastics Thang Long, Hamaden Viet Nam, Viet Nam Mie….
Quality Certificates : N/A
Other information : Y.H Seiko Vietnam JSC with high-tech equipment such as CNC
milling machine centers, CAD, CAM 3D, will bring the products with the highest precision.
Contact Information
Person in charge : Mr. KAZUO YOSHINAKA
Position : General Director
Address (Office) : Unit 6, Plot N-1, Thang Long Apartment Factory,
Thang Long I.P, Dong Anh district, Hanoi, Vietnam
Tel : +84-4-3959 0250
Fax : +84-4-3959 0251
Email : K.yoshinaka@yoshinaka-seiko.co.jp
Website : http://www.yh-seiko.com.vn
64 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 54
YANAGAWA SEIKO VIETNAM CO., LTD
We look for suppliers who supply steel round bar, stainless steel round bar, non-ferrous round bar,
and cutting tools
Selling Items
Product name: CNC Automatic Product name: CNC Automatic
Lathe Cutting parts Lathe Cutting parts
Use for: automotive related Use for: automotive related
products (high pressure pump) products (Injector)
Minimum lot: 10,000 pcs Minimum lot: 10,000 pcs
Material: steel, stainless steel Material: steel, stainless steel
Product name: CNC Automatic Product name: CNC Automatic
Lathe Cutting parts Lathe Cutting parts
Use for: automotive related Use for: automotive related
products (thermostat) products (ABS)
Minimum lot: 10,000 pcs Minimum lot: 10,000 pcs
Material: steel, stainless steel Material: steel, stainless steel
Purchasing Items
Product name: metal round bars Product name: copper round
Use for: CNC lathe cutting parts bar
for automobile Use for: CNC lathe cutting parts
Minimum lot: 500/Kg for automobile
Material: Steel, Stainless steel Minimum lot: 500/Kg
Material: Copper
Product name: cutting tool
Use for: lathe machines
Minimum lot: 50 pcs
Material: carbide
Company Profile
Establishment Year : June 2006
Number of Employees : 502
Factory Address : Land Plot J-5, Nomura IZ, An Duong district, Hai Phong province, Vietnam
Factory space (m2) : 14,000
Charter Capital (USD) : 1,266,899
Turnover in 2012 (USD) : 10,495,796
Main Technology : CNC lathe cutting
Main Customers : Hitachi, Fuji Seiko, Sanyo
Quality Certificates : ISO 9001; TS 16949; ISO 14001; OHSAS 18001
Other information : N/A
Contact Information
Person in charge : Mr. Tadayuki Yanagawa/Ms. Le Thi Huyen
Position : General Director/Sales
Address (Office) : Land Plot J-5, Nomura IZ, An Duong district,
Hai Phong province, Vietnam
Tel : +81 - 313 743 346
Fax : +81 - 313 743 347
Email : tad@yanagawaseiko.co.jp
Website : http://www.yanagawaseiko.co.jp
VIETNAM - JAPAN 65
SUPPORTING INDUSTRIES EXHIBITION
JP 55 JAPANESE COMPANY
Selling Items
Product name: Bus duct
Use for: Industrial metrial
Minimum lot: 5 pcs
Material: almiunm etc,...
Purchasing Items
Product name: Wire mesh Product name: Rubber or ilon
Use for: Railway car Sheet
Minimum lot: 100 pcs Use for: Passenger Car
Material: ilon Minimum lot: 10 pcs
Material: Rubber or ilon
Company Profile
Establishment Year : 28 October 1948
Number of Employees : 250
Factory Address : N/A
Factory space (m2) : N/A
Charter Capital (USD) : 1,237,000
Turnover in 2014 (USD) : 375,000,000
Main Technology : Trading Company
Main Customers : Vietnam Railways, All Japanese Railway company
Quality Certificates : ISO 9001:2008 (Electronics Sales Division)
Other information : Trading Company which deals in railroad car parts, electrical
parts, IT equipment and repair, maintenance of railroad cars/ parts for JR companies, urban
transpostation companies, private railway companies, railroad car manufacturers nationwide.
Contact Information
Person in charge : Mr. KOTARO ANDO
Position : General Manager
Address (Office) : R-701, Sannam Bdg., Duy Tan Str., Dich Vong Hau Ward,
Cau Giay District, Hanoi, Viet Nam
Tel : +84-4-626-92335/6
Fax : +84-4-626-92338
Email : k-andou@yashima-co.co.jp; v-vunguyen@yashima-co.co.jp
Website : http://www.yashima.co.jp/en
66 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
JAPANESE COMPANY JP 56
YODOGAWA RASENKAN MFG. CO.,LTD
We aim at made in Vietnam of the Japanese quality/
We need your cooperation
Purchasing Items
Product name: fittings (sus) Product name: fittings (sus)
Use for: Flexible Tube Use for: Flexible Tube
Minimum lot: 500 pcs/size Minimum lot: 500 pcs/size
Material: SUS, SS Material: SUS, SS
Company Profile
Establishment Year : 1964
Number of Employees : 40
Factory Address : 0-15, Tsukuda4-chome, Nishiyodogawaku, Osaka 555-0001 Japan
Factory space (m2) : 7,200
Charter Capital (USD) : 150,000
Turnover in 2014 (USD) : 12,500,000
Main Technology : Welding
Main Customers : NIPPON STEEL & SUMIKIN ENGINEERING CO., LTD
Quality Certificates : JIS
Other information : N/A
Contact Information
Person in charge : Mr. Nguyen Huy Truong
Position : Manager
Address (Office) : B1/001,Nguyen Hue 1 Quang Trung Commune,
Thong Nhat District,Dong Nai Province, Vietnam
Tel : +84 - 613-774 797
Fax : +84 -613-77 479
Email : truong.hpt.hato@gmail.com
Website : http://www.flexible.co.jp
VIETNAM - JAPAN 67
SUPPORTING INDUSTRIES EXHIBITION
VN 01 VIETNAMESE COMPANY
3H PLASTIC JSC
We can provide technical plastic products / We have pad printing in plastic products technology /
Our products are all kind of plastic injection moulding/ We are making mould precision and plastic
injection and blowing specialist.
Selling Items
Product name: Injection mould Product name: Head lamp
Use for: Motorcycle switch signal
Minimum lot: 01pc Use for: Yamaha motorcycle
Material: NAK80, P60 Minimum lot: 50,000 pcs
Material: POM
Company Profile
Establishment Year : March, 2010
Number of Employees : 50
Factory Address : Phuong Trach, Vinh Ngoc Commune , Dong Anh District,
Hanoi, Vietnam
Factory space (m2) : 1,800
Charter Capital (USD) : 90,000
Turnover in 2014 (USD) : 1,430,000
Main Technology : Plastic injection & blowing moulding
Main Customers : Taiwan, Japan, Indian
Quality Certificates : ISO9000, ISO14000
Other information : N/A
Contact Information
Person in charge : Mr. Hoang Van Huong
Position : Director
Address (Office) : No 8/118, Cau Giay street, Cau Giay District,
Hanoi, Vietnam
Tel : + 84 - 4 - 2217 1778
Fax : + 84 - 4 - 6269 0289
Email : hhoang@3hgo.com.vn; contact@3hgo.com.vn
Website : http://www.3hgo.com.vn
68 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 02
ANMI TOOLS CO.,LTD
Selling Items
Product name: Special Product name: Moulds
workpiece Use for: Stamping, plastic
Use for: Mechanical injection
Minimum lot: 5 pcs Minimum lot: 1 pc
Material: Steel Material: Steel SKD
Company Profile
Establishment Year : 2009
Number of Employees : 59
Factory Address : Lac Dao, Nhu Quynh District, Hung Yen Province, Viet Nam
Factory space (m ) 2
: 2,000
Charter Capital (USD) : 1,500,000
Turnover in 2013 (USD) : 4,000,000
Turnover in 2014 (USD) : 4,600,000
Main Technology : Cutting tools, Jig, Mould
Main Customers : Honda, Yamaha,…
Quality Certificates : N/A
Other information : ANMI is a manufacturer of detail with high, Accuracy, As a system
supplier for sales of cutting tools and machine tools accessories, regrinding and rebuilding,
Cutting tools.
Contact Information
Person in charge : Mr. Nguyen Hong Phong
Position : Country Sales Manager HP: +84 912 11 77 96
Address (Office) : Suite 317 - CT5 Building- PhamHung street,
Hanoi capital , Vietnam
Tel : +84-3556 2635
Fax : +84-3556 2634
Email : info@anmitools.com
Website : http://www.anmitools.com
VIETNAM - JAPAN 69
SUPPORTING INDUSTRIES EXHIBITION
VN 03 VIETNAMESE COMPANY
Company Profile
Establishment Year : 18, April, 2001
Number of Employees : 180
Factory Address : Tan Quang commune, Van Lam District, Hung Yen Province, Vietnam
Factory space (m2) : 10,260
Charter Capital (USD) : 3,500,000
Turnover in 2014 (USD) : 3,600,000
Main Technology : Die casting and processing zinc & aluminium alloys product
Main Customers : LG, ACE (USA), Panasonic Hung Yen Branch, KORG Viet Nam, DORCO VINA.
Quality Certificates : ISO 9001-2008; ISO14001-2004
Other information : Please review our production flow chart
Contact Information
Person in charge : Ms. Le Thi Thanh Hang
Position : Director
Address (Office) : Tan Quang commune, Van Lam District,
Hung Yen Province, Vietnam
Tel : +84 - 3213 991960
Fax : +84 - 3213 791382
Email : chi.nguyenminh@amaparts.com.vn/amapart@gmail.com
Website : http://www.amaparts.vn
70 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 04
BAC VIET TECHNOLOGY JSC
Our major products are injection molds and electronic plastics, technical plastics and precision
plastics
Selling Items
Product name: Injection Mold Product name: Phone parts
Use for: Injection Molding Use for: Smart phone
Minimum lot: 01 set/PO Minimum lot: 100,000 pcs
Material: Steel (NAK, SKD 61…) Material: PC, PU
Company Profile
Establishment Year : 2008
Number of Employees : 190
Factory Address : Km7, highway 18, Que Vo IP, Bac Ninh Province, Vietnam
Factory space (m2) : 32,183
Charter Capital (USD) : 3,271,000
Turnover in 2014 (USD) : 4,468,000
Main Technology : Injection molding and injection plastics
Main Customers : Canon, Samsung, Kyocera, Korg, Toho…
Quality Certificates : ISO 9001:2008
Other information : ISO 14001:2004
Contact Information
Person in charge : Mr. Tran Anh Vuong
Position : Chairman
Address (Office) : Km7, highway 18, Que Vo IZ, Bac Ninh Province, Vietnam
Tel : +84- 2413 617 933
Fax : +84- 2413 617 932
Email : vuong@bacvietsteel.com
Website : http://www.bacvietgroup.com; http://www.lim.vn
VIETNAM - JAPAN 71
SUPPORTING INDUSTRIES EXHIBITION
VN 05 VIETNAMESE COMPANY
Selling Items
Product name: Inspection Jig Product name: Assembly Jig
Use for: N/A Use for: N/A
Minimum lot: 01 pc Minimum lot: 01 pc
Material: S45C,SKD11 Material: A2017, SKD11, S45C
Company Profile
Establishment Year : 2008
Number of Employees : 110
Factory Address : Plot A2 - CN5, Tu Liem Industrial Zone, Tu Liem District,
Ha Noi, Viet Nam.
Factory space (m2) : 1,800
Charter Capital (USD) : 1,512,374
Turnover in 2014 (USD) : 1,600,000
Main Technology : Design and manufacture jigs, moulds and precision parts for
machines.
Main Customers : Yamaha, Honda, Hoya, Canon, Panasonic, Meiko...
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. Nguyen Van Tuan
Position : General Director
Address (Office) : Plot A2 - CN5, Tu Liem Industrial Zone, Tu Liem District,
Ha Noi, Viet Nam.
Tel : + 84 - 904 166 268
Fax : N/A
Email : sales@binhminhtmc.com
Website : http://binhminhtmc.com
72 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 06
CLOUD AND DRAGON CO.,LTD
Selling Items
Product name: washing- Product name: Can-PE Bottle
machine-Cover Use for: lubricants
Use for: Process plastic detail Minimum lot: 20,000 pcs
Minimum lot: 30,000 pcs Material: HDPE
Material: ABS, PP
Company Profile
Establishment Year : 09/04/1999
Number of Employees : 200
Factory Address : 15A - An Tri Road - Hung Vuong Ward, Hong Bang District,
Hai Phong City, Vietnam
Factory space (m2) : 20,000
Charter Capital (USD) : 1,200,000
Turnover in 2014 (USD) : 7,000,000
Main Technology : Injection molding & extrusion blow molding
Main Customers : LG Viet nam; Total, Idemitsu; Katara Tomy…
Quality Certificates : ISO 9001-2008, ISO 140001, ROHS
Other information : N/A
Contact Information
Person in charge : Mr. NGUYEN TRONG TUAN
Position : Director
Address (Office) : 15A - An Tri Road, Hung Vuong Ward.,Hong Bang District,
Hai Phong City, Vietnam
Tel : +84 - 31- 3798 886 / +84 - 986 333 028
Fax : + 84 - 31-3798 887
Email : vanlong@vanlongplastic.com.vn
Website : http://www.vanlongplastic.com.vn
VIETNAM - JAPAN 73
SUPPORTING INDUSTRIES EXHIBITION
VN 07 VIETNAMESE COMPANY
Selling Items
Product name: Pressing Product name: Bending
Use for: Motorbike, Home Use for: Motorbike
Appliances Minimum lot: 1,000 pcs
Minimum lot: 2,000 pcs Material: SWRM10, S10~S50C,
Material: SPCC, SPHC, SGCC, STAM390G, ...
SECC, STAM390G
Product name: Welding Product name: Pressing mold
Use for: Motorbike Use for: Motorbike, Home
Minimum lot: 2,000 pcs Appliances
Material: SPHC, SWRM10, Minimum lot: 01 set
STAM390G, S10-50C, ... Material: SKD11,SS400,KM12
Company Profile
Establishment Year : 2005
Number of Employees : 1,800
Factory Address : Khai Quang IZ, Vinh Yen city, Vinh Phuc Province, Vietnam
: Thuy Van IZ, Viet Tri city, Phu Tho Province, Vietnam
Factory space (m2) : 74,000
Charter Capital (USD) : 28,000,000
Turnover in 2014 (USD) : 48,500,000
Main Technology : Metal part manufacturing, mold design/manufacturing.
Main Customers : Honda Vietnam, Panasonic, Murata Leds
Quality Certificates : ISO 9001:2008, ISO14001:2004
Other information : 5S, Kaizen, TPS Learning & Practices
Contact Information
Person in charge : Mr. Nguyen Hoang Cong
Position : Business Director
Address (Office) : Khai Quang IZ, Vinh Yen City, Vinh Phuc province, Vietnam
Tel : +84 - 211 372 1138
Fax : +84 - 211 384 7877
Email : sales@cosmos.com.vn
Website : http://cosmos.com.vn
74 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 08
DONG HAI PLASTIC ONE MEMBER CO.,LTD
Selling Items
Product name: Phone case Product name: Nan plastic
Use for: Telephone blister
Minimum lot: 50,000 pcs Use for: extra-interior
Material: plastic decoration
Minimum lot: 30,000 pcs
Material: plastic
Product name: Phone case Product name: paint bucket and
Use for: Telephone industry oil bucket
Minimum lot: 50,000 pcs Use for: receptacle
Material: plastic Minimum lot: 20,000 pcs
Material: plastic
Company Profile
Establishment Year : 2002
Number of Employees : 150
Factory Address : Km39, 5 Road, Binh Giang District, Hai Duong Province, Vietnam
Factory space (m2) : 12,000
Charter Capital (USD) : 1,700,000
Turnover in 2014 (USD) : 4,800,000
Main Technology : Injection; molding
Main Customers : Panasonic Vietnam, LG Vietnam, Uniden Vietnam….
Quality Certificates : ISO 9001:2008 ISO 14000:2004
Other information : N/A
Contact Information
Person in charge : Mr. NGUYEN VAN HAI
Position : General Manager
Address (Office) : Km39, 5 Road, Binh Giang District, Hai Duong Province, Vietnam
Tel : +84 - 943 913 779
Fax : +84 - 320 3775 078
Email : nhuadonghai@gmail.com
Website : http:// nhuadonghai.com
VIETNAM - JAPAN 75
SUPPORTING INDUSTRIES EXHIBITION
VN 09 VIETNAMESE COMPANY
Selling Items
Product name: Pressed parts Product name: Rotor & Stato
Use for: Motorbike, sewing Use for: Motor core
machines,… Minimum lot: N/A
Minimum lot: N/A Material: Silicon Steel
Material: Steel
Company Profile
Establishment Year : 2010
Number of Employees : 120
Factory Address : Lot II.8.1, Khai Son IZ, Thuan Thanh District,
Bac Ninh Province, Viet Nam
Factory space (m2) : 8,000
Charter Capital (USD) : 3,408,015
Turnover in 2014 (USD) : 3,000,000
Main Technology : Mechanics – Electrics, Pressing/Processing in metal sheet
Main Customers : SAMSUNG, PANASONIC, IDEMITSU, JAGUAR, YS VINA,
INAVINA, APP, VHP
Quality Certificates : ISO 9001:2008
Other information : N/A
Contact Information
Person in charge : Mr. BUI DINH HIEU
Position : Vice Director
Address (Office) : Lot II.8.1, Khai Son IZ, Thuan Thanh District,
Bac Ninh Province, Viet Nam
Tel : +84 - 241 3798 483
Fax : +84 - 241 3798 484
Email : ecovietnam.sales@gmail.com; hieubd@ecovn.vn
Website : http:// www.ecovn.vn
76 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 10
ECOTEK CO.,LTD
Selling Items
Product name: Plastic Product name: Plastic
components components
Use for: Printer, computer and Use for: Printer, computer and
connector parts. connector parts.
Minimum lot: 20,000 pcs Minimum lot: 20,000 pcs
Material: PC, ABS Material: PC, ABS
Product name: Plastic Product name: Injection Mold
components Use for: Plastic pipes and
Use for: Printer, computer and fittings
connector parts. Minimum lot: 1 pc
Minimum lot: 20,000 pcs Material: Carbon steel, stainless
Material: PC, ABS steel
Product name: Plastic Product name: Injection Mold
components Use for: Plastic pipes and
Use for: Printer, computer and fittings
connector parts. Minimum lot: 1 pc
Minimum lot: 20,000 pcs Material: Carbon steel, stainless
Material: PC, ABS steel
Company Profile
Establishment Year : 2011
Number of Employees : 100
Factory Address : Thuan Thanh 3 Industrial Zone, Thuan Thanh District,
Bac Ninh Province, Vietnam
Factory space (m2) : 6,200
Charter Capital (USD) : 2,000,000
Turnover in 2014 (USD) : N/A
Main Technology : Designing and manufacturing mold, plastic injection, assembling
Main Customers : MUTO, TENMA
Quality Certificates : ISO 9001: 2008; ISO 14001:2004
Other information : 5S, KAIZEN
Contact Information
Person in charge : Mr. Bui Xuan Hai
Position : Director
Address (Office) : Thuan Thanh 3 Industrial Zone, Thuan Thanh District,
Bac Ninh Province, Vietnam
Tel : +84 - 241 379 8889
Fax : +84 - 241 379 8890
Email : eco-tek@eco-tek.vn
Website : http//eco-tek.vn
VIETNAM - JAPAN 77
SUPPORTING INDUSTRIES EXHIBITION
VN 11 VIETNAMESE COMPANY
Company Profile
Establishment Year : 2004
Number of Employees : 180
Factory Address : Ngoc Da, Tan Quang, Van Lam District, Hung Yen province, Vietnam
Factory space (m2) : 3,500
Charter Capital (USD) : 1,000,000
Turnover in 2013 (USD) : 3,500,000
Main Technology : Rubber Part Molding, Plastic&PVC Part Injection Plastic Painting Spraying.
Main Customers : Nippon Seiki, ASTI, LG, Panasonic, Nissin Brake….
Quality Certificates : ISO9001:2008 ; ISO14000:2004
Other information : Giai Phong Rubber Co., Ltd is a leading Plastic, PVC and rubber
parts maker in Vietnam. Our parts supply to Japanese, Korean, Taiwan Company in Vietnam and
Export to Asia (Japan & Thailand) also.
Contact Information
Person in charge : Mr. Le Anh Duc
Position : Factory Manager
Address (Office) : Ngoc Da, Tan Quang, Van Lam District,
Hung Yen province, Vietnam
Tel : +84 - 4 - 3677 0567
Fax : +84 - 4 - 3677 0565
Email : anhduc@caosugiaiphong.com
Website : http://giaiphongrubber.com http://caosugiaiphong.com
78 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 12
HAI VAN PRECISION EQUIPMENT CO.,LTD
Selling Items
Product name: HV001 Product name: HV004
Use for: Assembly of Electronic Use for: Machinery part
Components Minimum lot: 1 pc
Minimum lot: 1 pc Material: SS400
Material: S45C, SS400, SUS304,
A6061,…
Product name: HV002 Product name: HV005
Use for: Assembly of Electronic Use for: Electronic
Components Minimum lot: 1 pc
Minimum lot: 1 pc Material: SKS3
Material: A6061
Company Profile
Establishment Year : 2004
Number of Employees : 55
Factory Address : Cong Ha Village, Ha Man commune,
Thuan Thanh District, Bac Ninh province, Viet Nam
Factory space (m2) : 10,000
Charter Capital (USD) : 1,000,000
Turnover in 2014 (USD) : 1,600,000
Main Technology : Jig and mold
Main Customers : Canon VietNam Co., Ltd
Quality Certificates : N/A
Other information : Quality – Progress are above all. The development of the
Clients is our existence and development
Contact Information
Person in charge : Mr. Hoang Van Thai
Position : Director
Address (Office) : No 8/161 Thinh Quang , Tay Son, Dong Da District,
Ha Noi, Viet Nam.
Tel : +84 - 4 -3853 7808
Fax : N/A
Email : Hvpe@cokhihaivan.com
Website : http://www.cokhihaivan.com
VIETNAM - JAPAN 79
SUPPORTING INDUSTRIES EXHIBITION
VN 13 VIETNAMESE COMPANY
Selling Items
Product name: Gears of all types Product name: parts of pumps
Use for: Industrial equipment Use for: water pumps
Minimum lot: as per Minimum lot: as per
requirement (max diameter up requirement
to 4,000mm, module 30) Material: steel, pig iron
Material: Steel, Iron pig
Product name: Gear shafts Product name: parts of
Use for: Industrial Equipment hydropower stations
Minimum lot: as per Use for: hydropower stations
requirement Minimum lot: as per
Material: Steel requirement
Material: steel, iron pig, etc
Product name: casting parts Product name: heat treatment
Use for: industrial products parts
Minimum lot: as per Use for: Machinery
requirement (12,000ton/year) Minimum lot: as per
Material: iron casting, steel requirement
casting Material: Steel, pig iron
Company Profile
Establishment Year : 1958
Number of Employees : 400
Factory Address : Thuan Thanh 3 Industrial Park, Thanh Khuong Commune,
Thuan Thanh District, Bac Ninh province, Vietnam
Factory space (m2) : 16,000
Charter Capital (USD) : 3,000,000
Turnover in 2010 (USD) : 20,000,000
Main Technology : Mechanical Manufacturing
Main Customers : EVN (Vietnam), PILOUS (the Czech Republic), SMS, Danielli (Italy) …
Quality Certificates : ISO 9001:2008
Other information :
Contact Information
Person in charge : Mr. Do Hoai Nam
Position : Manager – Dept of Technology & Economy
Address (Office) : 76 Nguyen Trai Street, Thanh Xuan District,
Hanoi, Vietnam
Tel : +84 - 4 - 3858 4475
Fax : +84 - 4 - 3858 3268
Email : ttcntd@hameco.com.vn
Website : http://www.hameco.com.vn
80 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 14
HP-TECH VIETNAM ENGINEERING AND MOLDS JSC
Always take the satisfaction customers with the highest quality, the most competitive price and the
best delivery time.
Always take the satisfaction for our customers is our success
Selling Items
Product name: Cam die one Product name: Layout; 13 Step;
time 4 hole 1 one time one pcs
Use for: motorcycle Use for: motorcycle
Minimum lot: 1 pc Minimum lot: 10,000 pcs
Material: SKD11, S55C.. Material: SPCC
Company Profile
Establishment Year : 2012
Number of Employees : 50
Factory Address : Km 10, Highway No.5, Duong Xa, Gia Lam District, Ha Noi, Viet nam
Factory space (m2) : 10,000
Charter Capital (USD) : 500,000
Turnover in 2014 (USD) : 800,000
Main Technology : Making die, mould, jig and stamping
Main Customers : Technocom, Innotek, TS VietNam, Kyoei VN, Hyakuzo JP.
Quality Certificates : 9001:2008
Other information : The high design capacity, Assurance of quality and progress,
take satisfaction for customers
Contact Information
Person in charge : Mr. Nguyen Viet Hung
Position : Vice Director
Address (Office) : Km 10, Highway No.5, Duong Xa, Gia Lam District,
Ha Noi, Vietnam
Tel : +84- 43- 6789 527 (+84 912 031 698 mobile phone)
Fax : +84- 43 - 6789 517
Email : hptechvietnam@gmail.com
Website : http://hptechvn.com
VIETNAM - JAPAN 81
SUPPORTING INDUSTRIES EXHIBITION
VN 15 VIETNAMESE COMPANY
Selling Items
Product name: Stainless steel Product name: Hardfacing by
abrasives FCW welding
Use for: Mould, automobile, Use for: Cement, Oil & Gas...
motorbike Minimum lot: N/A
Minimum lot: N/A Material: Alloys wire
Material: Stainless steel
Product name: Shot blasting
service
Use for: Mould, Automobile and
motorbike
Minimum lot: N/A
Material: Stainless steel
Product name: PTA Coating
Use for: Cement. Oil & Gas
Automobile…
Minimum lot: N/A
Material: alloys powder
Company Profile
Establishment Year : 2008
Number of Employees : 15
Factory Address : Lot 49G, Quang Minh industrial park,
Me Linh District, Hanoi, Vietnam
Factory space (m2) : 700
Charter Capital (USD) : 300,000
Turnover in 2014 (USD) : 500,000
Main Technology : Materials & services for wear protection
Main Customers : Cement, Oil & Gas, Automobile…
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. Trinh Van Hai
Position : Director
Address (Office) : 59/124 Nguyen Hoang Ton Street, Tay Ho District, Hanoi
Tel : +84 - 4 - 3753 4303
Fax : +84 - 4 - 3758 3374
Email : hai@phuhopkim.vn
Website : http://www.phuhopkim.vn
82 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 16
HUNG DUNG CO.,LTD
Selling Items
Product name: Motorcycle spare Product name: Automation &
parts control
Use for: Motorcycle Use for: Multiple application
Minimum lot: N/A Minimum lot: N/A
Material: N/A Material: N/A
Company Profile
Establishment Year : 1998
Number of Employees : 120
Factory Address : Km 42 + 600, 5A Highway, Lai Cach Town,
Cam Giang District, Hai Duong
Factory space (m2) : 15,000
Charter Capital (USD) : 500,000
Turnover in 2014 (USD) : 1,000,000
Main Technology : N/A
Main Customers : Jaguar (Japan), Tam Kim ( Roman ),
Mai Lam (Nival), Sang Viet (E-link)…
Quality Certificates : ISO 9001:2008
Other information : N/A
Contact Information
Person in charge : Mr. Nguyen Tien Dung
Position : Director
Address (Office) : Km 42 + 600, 5A Highway, Lai Cach Town,
Cam Giang District, Hai Duong
Tel : +84 - 32 0378 3399
Fax : +84 - 32 0378 2396
Email : hungdunghd@hungdunghd.com.vn
Website : http://hungdunghd.com
VIETNAM - JAPAN 83
SUPPORTING INDUSTRIES EXHIBITION
VN 17 VIETNAMESE COMPANY
Selling Items
Product name: Mold Part Product name: Checking Jig
Dimension: 600x400x25 Dimension: 200x80x20
Minimum lot: 10 EA (10 EA/day) Minimum lot: 200 EA (200 EA/day)
Material: KD 11 Material: POM
Made by: SKD 11 Made by: Toyosk 30VJ
Company Profile
Establishment Year : 2008
Number of Employees : 68
Factory Address : Lot 05/9B, Hoang Mai Industrial Zone, Hoang Mai District, Hanoi
Factory space (m2) : 2,400
Charter Capital (USD) : 1,000,000
Turnover in 2014 (USD) : 960,000
Main Technology : Milling & Drilling CNC Machine
Main Customers : Sumitomo Wiring System, Denso Vietnam, Foster Electric, Hamaden
Vietnam, Yazaki, Samsung Vendors (level1)
Quality Certificates : ISO 9001:2008
Other information : N/A
Contact Information
Person in charge : Mr. Pham Hoang Long
Position : General Director
Address (Office) : Lot 05/9B, Hoang Mai Industrial Zone,
Hoang Mai District, Hanoi
Tel : +84 - 43 645 44 32
Fax : N/A
Email : Longph@ichivietnam.com.vn
Website : http://ichivietnam.com.vn
84 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 18
Selling Items
Product name: Conveyor Product name: Jig
Use for: Transporting and Use for: Jigs are used to stable
packing the goods. the position of products
Minimum lot: N/A Minimum lot: N/A
Material: Stell, aluminum, Material: Plastic, stell,
electrical materials aluminum
Product name: Working table Product name: Shelf
Use for: Working tables are Use for: Use to contain the
used to support workers in cargo
assembly time Minimum lot: N/A
Minimum lot: N/A Material: Stell, inox
Material: Wood, Stell, inox
Product name: Roller Product name: Trolleys
Use for: Transporting and Use for: Use to contain the
packing the goods. cargo and ship them to other
Minimum lot: N/A place in factory
Material: Stell Minimum lot: N/A
Material: Stell, inox
Company Profile
Establishment Year : 2008
Number of Employees : 72
Factory Address : No 4, Lot 2, Lai Xa Industrial Zone, Kim
Chung, Hoai Duc District, Hanoi, Vietnam.
Factory space (m2) : 1,400
Charter Capital (USD) : 230,000
Turnover in 2014 (USD) : 2,100,000
Main Technology : Assembly, Mold manufacturing, Machining parts, …
Main Customers : Canon, Mobase, Bridgestone, Fineteck
Quality Certificates : ISO 9001:2008
Other information : N/A
Contact Information
Person in charge : Mr. Tran Cao Khanh
Position : Director
Address (Office) : No 4, Lot 2, Lai Xa Industrial Zone, Kim
Chung, Hoai Duc District, Hanoi, Vietnam.
Tel : +84 - 4 6296 2032
Fax : +84 - 4 3366 0886
Email : support@idmea.com
Website : http://www.idmea.com
VIETNAM - JAPAN 85
SUPPORTING INDUSTRIES EXHIBITION
VN 19 VIETNAMESE COMPANY
Company Profile
Establishment Year : 2011
Number of Employees : 300
Factory Address : Lot II – 4.1, Que Vo II Industrial Zone, Que Vo District,
Bac Ninh Province, Vietnam
Factory space (m2) : 25,000
Charter Capital (USD) : 6,000,000
Turnover in 2014 (USD) : 3,000,000
Main Technology : Stamping & Pressing, Welding, Bending, Turning, Cutting, Lathe, Taro,...
Main Customers : Honda Vietnam, Micro Matic, Thai Steel Cable, Showa, Jaguar, VPIC…
Quality Certificates : ISO 9001:2008, ISO 14001:2004
Other information : Innotek’s business strategy is always to harmonize social
benefits and our benefits. We provide products with reliable quality and reasonable price.
Our objective is quality product, competitive price, punctual delivery and after sales
services perfect.
Contact Information
Person in charge : Mr. Do Khac Duy Vu / Ms. Nguyen Thi Nhan
Position : General Director / Deputy General Director
Address (Office) : Lot II – 4.1, Que Vo II Industrial Zone, Que Vo District,
Bac Ninh Province, Vietnam
Tel : +84 - 241 - 362 3318
Fax : +84 - 241 - 362 3319
Email : vudo@innotek.com.vn / nhannt@innotek.com.vn
Website : http:// www.innotek.com.vn
86 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 20
JAT AUTOPARTS AND INDUSTRY EQUIPMENTS PRODUCTION JSC
JAT company specializes in the field of manufacturing auto parts, motorbike parts, industrial
equipment and other mechanical products for supporting industry.
Our current production lines and sections are: 1.Pressing section with 43 press machine from 20MT
to 180MT; 2. welding section (TIG welding machines, MIG - MAG welding machines, SPOT welding
machines); and 3. Machining section( CNC lathes, hydraulic lathes, Sanga lathes, specialized lathes..),
Drilling machines, Tapping machines, broaching machines, milling machines, band saw cutting
machines, circular saw cutting machines, tube end expanding, tube bending…
Selling Items
Product name: Bracket Product name: Clamp
Use for: Motorbike part Use for: Autopart
Minimum lot: 5,000 pcs Minimum lot: 5,000 pcs
Material: steel Material: steel
Company Profile
Establishment Year : 2008
Number of Employees : 266
Factory Address : Lot II-8.2 Que Vo II IZ, Ngoc Xa Communce,
Que Vo District, Bac Ninh Province, Vietnam
Factory space (m2) : 15,000
Charter Capital (USD) : 400,000
Turnover in 2014 (USD) : 5,970,000
Main Technology : Pressing, Welding, Machining
Main Customers : Honda VN, Piaggio VN, VAP, Ariston..
Quality Certificates : ISO 9001:2008, ISO 140001
Other information : N/A
Contact Information
Person in charge : Mr. Tran Duy Nhat
Position : Director
Address (Office) : Lot II-8.2 Que Vo II IZ, Ngoc Xa Communce,
Que Vo District, Bac Ninh Province, Vietnam
Tel : +84 - 241 3623 069
Fax : +84 - 241 3623 068
Email : info@jat-autopart.com/nhungntt@jat-autopart.com
Website : http://www.jat-autopart.com
VIETNAM - JAPAN 87
SUPPORTING INDUSTRIES EXHIBITION
VN 21 VIETNAMESE COMPANY
Selling Items
Product name: Central Stands Product name: Handle bar
Use for: Scooter Use for: Scooter
Minimum lot: N/A Minimum lot: N/A
Material: STKM, SPCC, SPHC, Material: SPFH590
S35C, S45C,
Company Profile
Establishment Year : 2004
Number of Employees : 600
Factory Address : Lot 15 Quang Minh Industrial park, Me Linh District, Hanoi, Vietnam
Factory space (m2) : 20,000
Assets (USD) : 7,100,000
Turnover in 2014 (USD) : 20,000,000
Main Technology : Stamping, Pressing, Bending, Welding, Plating
Main Customers : Honda, Goshi, Piaggio, SYM, Taico (Hoshizaki, Toho), Iwatani, Japanese
trading companies and European trading companies.
Quality Certificates : ISO 14001-2004 in 2015; ISO 9001-2008 in 2010; International Arch of
Europe Golden Award in 2015; Vietnam Trusted Quality Supplier by GTA Global, UK, in 2014 & 2015; The
best supplier for Q&D by Goshi Vietnam in 2013; The best overall supplier by Piaggio Vietnam in 2010
Other information : Quality to last, Price to afford, Delivery to defeat time! Reaching the
Summit, meeting customers’ satisfaction.
Contact Information
Person in charge : Ms. Le Thi Ngoc Lan
Position : Deputy CEO
Address (Office) : Lot 15 Quang Minh Industrial park, Me Linh District, Hanoi, Vietnam
Tel : +84 - 4 - 3818 2522
Fax : +84 - 4 - 3818 2511
Email : lan@legroupcompany.com; lan@legroup.com.vn, info@legroup.com.vn
Website : http://www.legroup.com.vn
88 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 22
MANH QUANG CO.,LTD
We can provide gear, shaft and spindle, sprocket for machine and vehicle with 100% process in
house. Beside that, we also can supply fine blanking parts, hot and cold forging parts, heat treatment
service like carburizing, carbunitriding, inductioning...
Selling Items
Product name: Sprocket and Product name: Ball race bearing
chain Use for: Motorcyle
Use for: motorcycle Minimum lot: 1,000 pcs
Minimum lot: 500 pcs Material: SCM435
Material: SCR420, S45C
Company Profile
Establishment Year : 1983
Number of Employees : 250
Factory Address : Kim Giang Road, Thanh Liet Commun , Thanh Trì Ward,
Hanoi capital, Vietnam
Factory space (m2) : 27,000
Charter Capital (USD) : 4,500,000
Turnover in 2014 (USD) : 15,000,000
Main Technology : Hot and Cold forging, Fine Blanking press, Machining, Gear
Techlonogy, Heat treatment.
Main Customers : Honda Vietnam, Sumitomo….
Quality Certificates : 9001: 2008
Other information : N/A
Contact Information
Person in charge : Mr. Nguyen Manh Quang
Position : Assistant Director
Address (Office) : 201 Hue street, Hai Ba Trung District, Ha Noi, Vietnam
Tel : +84 - 43 688 3376 (+84 9 03 679 650 mobile phone )
Fax : +84 - 43 688 3378
Email : manhquangmq@manhquang.com
Website : http://manhquang.com or http://manhquang.vn
VIETNAM - JAPAN 89
SUPPORTING INDUSTRIES EXHIBITION
VN 23 VIETNAMESE COMPANY
Selling Items
Product name: Product Carton Product name: Steel Case
Use for: Packaging products Use for: Packaging products
Minimum lot: 30,000 pcs Minimum lot: 3,000 pcs
Material: carton Material: steel
Company Profile
Establishment Year : 2007
Number of Employees : 104
Factory Address : Keu Zone - Dao Duc Commune – Binh xuyen District - Vinh Phuc Province
Factory space (m )
2
: 10,000
Charter Capital (USD) : 1,700,000
Turnover in 2014 (USD) : 500,000
Main Technology : Carton production line, Mechanical manufacturing equipment
Main Customers : Honda Vietnam , Toyota Vietnam, Piaggio Viet Nam, UJU Vina,
Heasung Vina, ToTo…
Quality Certificates : ISO 9001:2008
Other information : “Safety first - Assurance of Customer about the quality of the
product - Assurance of employee when dedication”
Contact Information
Person in charge : Mr. Ha Huu Tuyen
Position : Director
Address (Office) : Keu Zone, Dao Duc Commune, Binh xuyen District
Vinh Phuc Province, Vietnam
Tel : + 84 9 1234 6688 (+ 84 907 826 888 )
Fax : + 84 - 211 359 3388
Email : minhdungct@gmail.com
Website : http://www.minhdung.vn
90 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 24
MINH QUANG TRADING & INDUSTRIES CO.,LTD
MINH QUANG TRADING & INDUSTRIES CO., LTD has experience in manufacturing mechanical
products, processing parts based on the customers’ design drawing.
Selling Items
Product name: Washer Product name: Special Nut
Use for: motorcycle parts Use for: shower accessories
Minimum lot: 1,000 pcs/month Minimum lot: 1,000 pcs/month
Material: Steel (SPCC, SPHC, Material: copper (C3604BD);
SAPH,…); copper inox (SUS304)
Company Profile
Establishment Year : 2004
Number of Employees : 150
Factory Address : 61 team, Dong Anh town, Dong Anh District, Hanoi, Vietnam
Factory space (m2) : 7,700
Charter Capital (USD) : 843,000
Turnover in 2014 (USD) : 2,700,000
Main Technology : CNC Lathing, Pressing, Forming
Main Customers : Showa Vietnam, FCC Vietnam, KYB Vietnam, Mitsuboshi Forming
Vietnam, TOTO Vietnam, KYB Asia, Honda Philippine INC, Showa Do Brasil.
Quality Certificates : ISO 9001-2008
Other information : Try the best to get the highest sastification of customers
Contact Information
Person in charge : Mr. Le Minh Giang
Position : General Director
Address (Office) : 61 team, Dong Anh town, Dong Anh District,
Hanoi, Vietnam
Tel : +84- 4- 2211 8360 (Mobile: +84-91-324 7800)
Fax : +84-4- 3965 2536
Email : info@mqc.com.vn, giang@mqc.com.vn
Website : http://www.mqc.com.vn
VIETNAM - JAPAN 91
SUPPORTING INDUSTRIES EXHIBITION
VN 25 VIETNAMESE COMPANY
Selling Items
Product name: Jig camera Product name: Diaphragm
Use for: mobile presses machine
Minimum lot: 100 pcs Use for: Moblie and TiVi
Material: Aluminum A5052 Minimum lot: 1 pc
Material: Aluminum A5052 and
Steel C45
Product name: Jig headphone, Product name: Cutter
speaker diaphragm machine
Use for: Mobile Use for: Mobile
Minimum lot: 100 pcs Minimum lot: 1 pc
Material: Aluminum A5052 and Material: Aluminum A5052 and
SUS 304 Steel C45
Product name: Heat presse Product name: Auto insert
machine Diaphragm and voice coil
Use for: Mobile Machine
Minimum lot: 1 pc Use for: Mobile
Material: Aluminum A5052, Minimum lot: 1 pc
steel C45 Material: Aluminum A5052
Company Profile
Establishment Year : 2006
Number of Employees : 150
Factory Address : 226 Phuc Dien, Xuan Phuong, Tu Liem District, Hanoi, Vietnam
Factory space (m2) : 3,600
Charter Capital (USD) : 500,000
Turnover in 2014 (USD) : 4,000,000
Main Technology : Conveyor, Jig, Machine, CNC machine
Main Customers : Samsung, Anam, Panasonic, Foster,SEI
Quality Certificates : ISO 9001:2008
Other information : We provide solutions to improve and enhance production efficiency
Contact Information
Person in charge : Mr. DO TIEN LONG
Position : Marketing deputy director
Address (Office) : 226 Phuc Dien, Xuan Phuong, Tu Liem District,
Hanoi, Vietnam
Tel : 84 - 4 3763 1015
Fax : 84 - 4 3763 1016
Email : longdt@pmtt.com.vn
Website : http://pmtt.com.vn
92 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 26
PRODETECH JSC
We can provide friendly environment HVAC application products / We have new technology / Our
products are insulation and soundproof material/ We are the material specialist
Selling Items
Product name: Pipe rubber Product name: Egg sheet
foam insulation rubber foam insulation and
Use for: Insulation and soundproof
Soundproof for HVAC Use for: Silencer for FCU, AHU
Minimum lot: 10,000 pcs/1code Minimum lot: 2,000m2/ 1code
Material: Nitril Rubber Insulation Material: Nitril Rubber Insulation
Product name: Sheet rubber Product name: Press coustic
foam insulation rubber foam insulation
Use for: Insulation and Use for: Silencer for FCU, AHU
soundproof for HVAC Minimum lot: 500m2/ 1code
Minimum lot: 2,000 m2/ lot Material: Rubber crushed
Material: Nitril Rubber Insulation material
Product name: Egg and Pyramid Product name: Pipe support PU
Sheet Pu Foam Soundproof Foam
Use for: Soundproof for fan Use for: Hanger insulation for
Minimum lot: 1,000m2/ lot chiller pipe
Material: Pu foam Minimum lot: 2,000 set /1 code
Material: PU Urethan Insulation
Company Profile
Establishment Year : 1996
Number of Employees : 80
Factory Address : ATATA Factory Km16+500 Thang long Highway
Yen Son IZ, Quoc Oai District, Hanoi Capital, Vietnam
Factory space (m2) : ~ 10,000
Charter Capital (USD) : 2,250,000
Turnover in 2014 (USD) : 1,600,000
Main Technology : Japan & Korea
Main Customers : M&E Contractor ( Japan, Korea, Taiwan, VN )
Quality Certificates : ISO 9001 : 2008
Other information : ATATA Thermal Break and Soundproof
Contact Information
Person in charge : Mr. Nguyen Xuan Tai
Position : Director
Address (Office) : ATATA Factory Km16+500 Thang long Highway
Yen Son IZ, Quoc Oai District, Hanoi Capital, Vietnam
Tel : +84 - 4 33 940 189
Fax : +84 - 4 33 678 853
Email : sales@atata.com.vn
Website : http://www.atata.com.vn
VIETNAM - JAPAN 93
SUPPORTING INDUSTRIES EXHIBITION
VN 27 VIETNAMESE COMPANY
Selling Items
Product name: Switchgears Product name: Sheet metal
Use for: Electricity Use for: Industry
Minimum lot: 05 pcs Minimum lot: 100 pcs
Material: steel, SUS Material: steel
Company Profile
Establishment Year : 2015
Number of Employees : 50
Factory Address : D2, Dai Dong, Hoan Son IP, Bac Ninh Province, Vietnam.
Factory space (m2) : 2,000
Charter Capital (USD) : 500,000
Turnover in 2014 (USD) : 295,000
Main Technology : Mechanical manufacturing
Main Customers : ABB, Hoya, IWI, Myungtech, Denver
Quality Certificates : ISO 9001:2008
Other information : N/A
Contact Information
Person in charge : Mr. Hoang Van Truong
Position : Plant Director
Address (Office) : D2, Dai Dong, Hoan Son IP, Bac Ninh Province, Vietnam.
Tel : +84 - 2413 848 186
Fax : +84 - 2413 848 166
Email : sales@seiki-vn.com
Website : http://www.seiki-vn.com
94 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 28
SEIKICO PRECISION MECHANICAL CO.,LTD
High quality and Prompt Delivery!
Selling Items
Product name: Copper Rings Product name: Píns
Use for: Construction Use for: Electronics, Beverage
Minimum lot: 100 pcs etc.
Material: Copper Minimum lot: 100 pcs
Material: Stainless
Company Profile
Establishment Year : 2010
Number of Employees : 40
Factory Address : Lot CN3, Minhkhai SME IZ, Bac Tu liem District, Hanoi, Vietnam
Factory space (m2) : 1,300
Charter Capital (USD) : 250,000
Turnover in 2010 (USD) : 1,000,000
Main Technology : Machining
Main Customers : Japanese, Korean
Quality Certificates : ISO 9001-2008
Other information : N/A
Contact Information
Person in charge : Mr. Giao Thanh Son
Position : Director
Address (Office) : Lot CN3, Minhkhai SME IZ, Bac Tu liem District,
Hanoi, Vietnam
Tel : +84 - 4 - 3780 5206; +84 - 985 472 963
Fax : +84 - 4 - 3780 5205
Email : son.seikico@gmail.com
Website : http://www.seikico.net
VIETNAM - JAPAN 95
SUPPORTING INDUSTRIES EXHIBITION
VN 29 VIETNAMESE COMPANY
Selling Items
Product name: Tube Air/c Product name: Duct Air/c
Connectting Use for: Motorcycle
Use for: Motorcycle Minimum lot: 5,000 pcs
Minimum lot: 5,000 pcs Material: Plastic
Material: Rubber
Company Profile
Establishment Year : 2000
Number of Employees : 220
Factory Address : Lot D9-D10, Dinh Tram Industrial Zone,
Viet Yen district, Bac Giang province, Viet Nam
Factory space (m2) : 15,000
Charter Capital (USD) : 100,000
Turnover in 2014 (USD) : 4,600,000
Main Technology : Rubber and Plastic
Main Customers : Roki VN, Piaggio VN, Tokaitrim VN, Nissin VN...
Quality Certificates : ISO 9001:2008
Other information : N/A
Contact Information
Person in charge : Ms. Hoang Thu Ngoc (Mobile: 0943 666 638)
Position : General Director
Address (Office) : Lot D9-D10, Dinh Tram Industrial Zone,
Viet Yen district, Bac Giang province, Viet Nam
Tel : +84 - 240 366 1643
Fax : +84 - 240 366 1918
Email : sit@shenglivietnam.com or ngoc.ht@shenglivietnam.com
Website : www.shenglivietnam.com
96 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 30
SUNPLA jsc
Selling Items
Product name: Front cover Product name: Sim gate
Use for: Mobile Phone Use for: Mobile phone
Minimum lot: 500,000 pcs Minimum lot: 500,000 pcs
Material: Plastics Material: Plastics
Company Profile
Establishment Year : 2012
Number of Employees : 80
Factory Address : Lot E1,E2, Dinh Tram Industrial Zone, Hoang Ninh,
Viet Yen district, Bac Giang province.
Factory space (m2) : 10,000
Charter Capital (USD) : 400,000
Turnover in 2014 (USD) : 379,311
Main Technology : Plastics Injection & Mold
Main Customers : Viettel , Framas, Hikari
Quality Certificates : ISO9001-2008 & ISO14001-2004
Other information : N/A
Contact Information
Person in charge : Mr. Nguyen Duc Cuong
Position : Sales Director
Address (Office) : Lot E1,E2, Dinh Tram Industrial Zone, Hoang Ninh,
Viet Yen district, Bac Giang province.
Tel : +84 - 240 3662 288
Fax : +84 - 240 3662 266
Email : cuongnd@sunpla.com.vn
Website : http://www.sunpla.com.vn
VIETNAM - JAPAN 97
SUPPORTING INDUSTRIES EXHIBITION
VN 31 VIETNAMESE COMPANY
Selling Items
Product name: Main control panel Product name: Inverter panel
Use for: Control production line Use for: Control production
of factory line, conveyor,…
Minimum lot: 1 pc Minimum lot: 1 pc
Material: electric devices, PLC Material: AC Inverter, electric
system,etc.. devices, PLC system,etc..
Product name: Production board Product name: Wasterwater
Use for: To control and monitor treatment control system
productions process of line Use for: control wastewater
Minimum lot: 1 pc treatment system of the Factory
Material: PLC system, PC and Minimum lot: 1 pc
LCD monitor,..etc Material: electric devices, PLC system,etc..
Product name: AC servo control Product name: Quality control
system system
Use for: accurate cutting control Use for: to control product quality
Minimum lot: 1 pc Minimum lot: 1 pc
Material: : PLC system, HMI, AC Material: PLC system, PC and
servo,..etc LCD monitor,..etc
Company Profile
Establishment Year : 2014
Number of Employees : 15
Factory Address : Chuc Son Industrial zone, Chuong My District, Ha Noi, Viet Nam
Factory space (m2) : 500
Charter Capital (USD) : 200,000
Turnover in 2014 (USD) : N/A
Main Technology : Electrical panel design-assembly & PLC software development
Main Customers : Toto VN, Toyota boshoku HN, Denso VN, ToyoInk,
Terumo,… other Japan companies in VN
Quality Certificates : N/A
Other information : We want to develop, and making bussiness
with Japan and Korea companies in VN
Contact Information
Person in charge : Mr. Le Hien Tuan
Position : Director
Address (Office) : No 10, Ham Nghi Street, Nam Tu Liem District, Ha Noi, Viet Nam
Tel : +84- 902 130 103
Fax : +84- 989 578 698
Email : info@tamphatjsc.com - lehientuan@yahoo.com
Website : http://www.tamphatjsc.com
98 VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
VIETNAMESE COMPANY VN 32
TAN PHAT AUTOMATION JSC
Selling Items
Product name: 3D Scanner Product name: Inspection by
Use for: Metal, Plastic Vision
Minimum lot: 01 pc Use for: Electronics, Metal, F&B
Material: NI software & Minimum lot: 01 pc
Components Material: Camera and Sensor
Company Profile
Establishment Year : 2006
Number of Employees : 83
Factory Address : No.168, Phan Trong Tue Road, Thanh Tri Ward,
Thanh Liet District, Hanoi, Vietnam
Factory space (m2) : 1,700
Charter Capital (USD) : 300,000
Turnover in 2014 (USD) : 2,326,000
Main Technology : Robotics, Vision and Assembly Technology
Main Customers : Canon Vietnam; Denso Vietnam; Toyota Vietnam and etc
Quality Certificates : ISO 9001-2008; CE; IEC 60335-1:2010; TCVN 5699-1:2010
Other information : N/A
Contact Information
Person in charge : Mr. Nguyen Trong Thuong
Position : Vice Director
Address (Office) : No.168, Phan Trong Tue Road, Thanh Tri Ward,
Thanh Liet District, Hanoi, Vietnam
Tel : +84 - 4-3685 7776
Fax : +84 - 4-3685 7775
Email : thuong.nt@tpa.com.vn
Website : http://tanphat.com
VIETNAM - JAPAN 99
SUPPORTING INDUSTRIES EXHIBITION
VN 33 VIETNAMESE COMPANY
TECHNOKOM JSC
Selling Items
Product name: Plate A comp Product name: Separtor B
Use for: Motocycles parts Use for: Motocycles parts
Minimum lot: 5,000 pcs Minimum lot: 5,000 pcs
Material: Steel Material: Steel
Company Profile
Establishment Year : 2010
Number of Employees : 248
Factory Address : Tan Quang Industrial Park, Van Lam District,
Hung Yen Province, vietnam
Factory space (m2) : 3,500
Charter Capital (USD) : 1,650,000
Turnover in 2014 (USD) : 4,250,000
Main Technology : Stamping,Welding and buffing.
Main Customers : GTA, TS Viet Nam, VPIC, ICSN, ITP
Quality Certificates : ISO 9001:2000
Other information : TECHNOKOM JSC., specializes in manufacturing of motocycles,
auto parts and machining parts. With our staff of high qualified personnel, experienced and
equipped with advanced machines, TECHNOKOM has been a prestigious and reliable partner
among the leading companies in automotive and motorcycles manufacturing in Viet Nam.
Contact Information
Person in charge : Mr. Dinh Xuan Son
Position : Director
Address (Office) : Tan Quang Industrial Park, Van Lam District,
Hung Yen Province, vietnam
Tel : +84 - 32 137 91750
Fax : +84 - 32 137 91751
Email : info@technokom.com.vn/ kinhdoanh.tnk@gmail.com
Website : http://www.technokom.com.vn
Selling Items
Product name: Sewing machine Product name: Valve body
body Use for: Valve
Use for: Sewing machine Minimum lot: 10,000 pcs
Minimum lot: 10,000 pcs Material: FC200 – cast iron
Material: FC150 – cast iron
Company Profile
Establishment Year : 2000
Number of Employees : 120
Factory Address : My Dong industrial Zone, Thuy Nguyen District,
Hai Phong province, Vietnam
Factory space (m2) : 4,500
Charter Capital (USD) : 720,000
Turnover in 2014 (USD) : 4,000,000
Main Technology : Casting Iron
Main Customers : PEGASUS VIETNAM SEWING MACHINE, KNC MARINE KOREA,
Sena VietNam, TNHH Long Quang…
Quality Certificates : ISO 9001-2008
Other information : N/A
Contact Information
Person in charge : Mr. Nguyen Van Thien
Position : Director
Address (Office) : My Dong industrial Zone, Thuy Nguyen Dist.,
Hai Phong province, Vietnam
Tel : + 84 - 313 645 664 ( +84 - 904 051 595)
Fax : + 84 - 313 773 124
Email : hopkimthinhhung@gmail.com
nguyenvanthienhp72@gmail.com
Website : http://ducthinhhung.com
Selling Items
Product name: round parts Product name: watch assembly
Use for: Automotive line
Minimum lot: 1 pc Use for: assembly watch
Material: Steel Minimum lot: 1 pc
Material: Aluminium, plastic,
steel
Product name: Assembly jig Product name: Wheel assembly
Use for: assembly plastic part machine
Minimum lot: 1 pc Use for: Automotive
Material: Aluminium, plastic Minimum lot: 1 pc
Material: Steel, plastic &
standard parts
Product name: Auto Assembly Product name: integrated
machine system
Use for: Assembly retainer Use for: packing
Minimum lot: 1 pc Minimum lot: 1 pc
Material: Steel, Aluminium, Material: Steel, Robot
plastic & standard parts
Company Profile
Establishment Year : 2006
Number of Employees : 130
Factory Address : No.4, Lot 3, Lai Xa Industrial Zone, Hoai Duc district, Hanoi, Vietnam
Factory space (m2) : 2500 ( 1/2016 new factory: 6400m2)
Charter Capital (USD) : 1,200,000
Turnover in 2014 (USD) : 3,500,000
Main Technology : custom machine & precision parts
Main Customers : Yamaha, Meiko, Hamaden, Sumitomo
Quality Certificates : ISO 9001:2008 & ISO 14001: 2004
Other information : N/A
Contact Information
Person in charge : Ms. LE THANH THUY
Position : Director
Address (Office) : No.4, Lot 3, Lai Xa Industrial Zone, Hoai Duc district,
Hanoi, Vietnam
Tel : +84 - 4 3366 4038
Fax : +84 - 4 33664036
Email : thuylt@tci.vn / info@tci.vn
Website : http://www.tci.vn
Selling Items
Product name: Wire harness Product name: Thermoforming
Use for: Motobikes trays
Minimum lot: 100 pcs Use for: Industrial containers
Material: Wire, housing, Minimum lot: 1000 pcs
connector Material: PP, PS, Pet, PVC
Company Profile
Establishment Year : 2008
Number of Employees : 230
Factory Address : Phung Industrial Zone, Dan Phuong District, Ha Noi
Factory space (m2) : 4,400
Charter Capital (USD) : 1,000,000
Turnover in 2014 (USD) : 4,300,000
Main Technology : Automatic wire cutting, stripping and stamping m/cs
Main Customers : Asti, Piaggio, Tenma, Toyodenso, Stanley, Sumi Viet Nam …
Quality Certificates : ISO 9001:2008; ISO 14001:2004
Other information : 5S, Kaizen
Contact Information
Person in charge : Ms. Bui Thanh Hang
Position : Vice Director
Address (Office) : Phung Industrial Zone, Dan Phuong District,
Hanoi, Vietnam
Tel : 84 - 4 3363 5443/5/6
Fax : 84 - 4 3363 5447
Email : viet-an1@viet-an.vn
Website : http://viet-an.vn
Selling Items
Product name: Mechanical part Product name: Conveyor
Use for: Spare parts Use for: Industrial
Minimum lot: 5 pcs Minimum lot: 1 pc
Material: SKD, Cu…. Material: PVC, Roller, Rubber,
Aluminum, Steel
Company Profile
Establishment Year : 2005
Number of Employees : 500
Factory Address : Tan Quang Industrial Zone, Van Lam Dist,
Hung Yen Province, Viet Nam
Factory space (m2) : 2,000
Charter Capital (USD) : 8,500,000
Turnover in 2014 (USD) : 8,203,973
Main Technology : Consulting, design & manufacturing
Automatic machine systems for production
Main Customers : Honda, Toyota, Yamaha, Ford, Vap, Goshi, Denso, Hal, Piaggio, …
Quality Certificates : ISO 9001:2008
Other information : N/A
Contact Information
Person in charge : Mr. Le Thanh Luong
Position : General Director
Address (Office) : No 801, Silver Wings Building, Nguyen Van Cu Street
Long Bien District, Ha Noi, Viet Nam
Tel : +84 - 4 2220 7918
Fax : +84 - 4 2220 7919
Email : info@cnvgroup.com.vn
Website : http://cnvgroup.com.vn/
Selling Items
Product name: Electrical box Product name: Terminal box
Use for: GE wind power projects case
Minimum lot: 800m2/shift (8h) Use for: Panasonic
Material: Steel Minimum lot: 1,000 pcs/h
Material: Galvanized steel
Company Profile
Establishment Year : 2010
Number of Employees : 40
Factory Address : Lot A1, Dai Dong IP, Hoan Son, Tien Du district, Bac Ninh province
Factory space (m2) : 3,000
Charter Capital (USD) : 300,000
Turnover in 2014 (USD) : 1,000,000
Main Technology : Electro Static Coating
Main Customers : GE, KEINHING MURAMOTO, JAT, ARISTON,
NISSIN ELECTRIC, SAMSUNG…
Quality Certificates : ISO 9001:2008
Other information : N/A
Contact Information
Person in charge : Mr. Le Duc Long
Position : Managing Director
Address (Office) : Lot A1, Dai Dong IP, Hoan Son, Tien Du, Bac Ninh
Tel : +84 - 2413 847 832
Fax : +84 - 2413 847 834
Email : vietrainbow1@gmail.com
Website : http://www.vietrainbow.com
Selling Items
Product name: Aluminum Die Product name: Plastic Injection
Casting Mold Products
Use for: Motobike Use for: Telephone, Card swipe
Minimum lot: N/A machine
Material: Aluminum Minimum lot: N/A
Material: Plastic
Product name: Gravity Casting Product name: Plastic Injection
Molds Products
Use for: Motobike Use for: Vacuum Cleaner
Minimum lot: N/A Minimum lot: N/A
Material: Metals Material: Plastic
Company Profile
Establishment Year : 2006
Number of Employees : 500
Factory Address : Lot 43-D3, Quang Minh industrial park, Melinh District,
Hanoi, Vietnam
Factory space (m2) : 12,000
Charter Capital (USD) : 7,200,000
Turnover in 2014 (USD) : 12,000,000
Main Technology : Mold Manufacture & Plastic Injection
Main Customers : Honda, Nissin, Canon, Panasonic, Samsung, VAP, Tsukuba
Quality Certificates : ISO 9001:2008 & ISO 14001:2004
Other information : N/A
Contact Information
Person in charge : Mr. Nguyen Huu Tuan
Position : General Director
Address (Factory) : Lot 43-D3, Quang Minh industrial park, Melinh District,
Hanoi, Vietnam
Tel : +84 - 4 3525 1113/14/15
Fax : +84 - 4 3525 1112
Email : htm-mechanical@htmp.com.vn
Website : http://www.htmp.com.vn
Selling Items
Product name: Supply of Dies Product name: Assembly lines
and Molds. systems, Automation systems.
Use for: Automobile, Electronics Use for: Automobile, Electronics
/Electric parts. /Electric parts.
Minimum lot: 5,000 pcs Minimum lot: 100 pcs
Material: Aluminum,Steel,Sus Material: Aluminum,Steel,sus
Product name: Supply of Jigs Product name: Conveyors,
Use for: Automobile, Electronics Conveyors System.
/Electric parts. Use for: Electric parts
Minimum lot: 5,000 pcs Minimum lot: 500 pcs
Material: Aluminum,Steel,Sus Material: Aluminum,Steel,sus
Company Profile
Establishment Year : 2011
Number of Employees : 68
Factory Address : Lot A2, CN5, Tu Liem IZ, Minh Khai Com, Bac Tu Liem District,
Hanoi, Viet Nam
Factory space (m2) : 1,000
Charter Capital (USD) : 150,000
Turnover in 2014 (USD) : 1,500,000
Main Technology : Jig, Dies and Molds, Conveyor assembly
Main Customers : SamSung, YoKoWo, Pioneer, Panasonic,…
Quality Certificates : ISO 9001:2008, 5S
Other information : N/A
Contact Information
Person in charge : Mr. Huu Thang Hoang
Position : General Director
Address (Office) : Lot A2, CN5, Tu Liem IZ, Minh Khai Com, Bac Tu Liem Dist,
Hanoi, Viet Nam
Tel : +84 - 46 680 6795
Fax : +84 - 43 765 3875
Email : intechvietnamjsc@gmail.com
Website : http://intechvietnam.com
Selling Items
Product name: Injection Mold Product name: Jig
Use for: Refrigerator, Washing Use for: Check Product, Weding
machines, Motorbike Jigs
Minimum lot: 10,000 pcs Minimum lot: 100 pcs
Material: Plastic Material: Bakelit Resin
Company Profile
Establishment Year : 2006
Number of Employees : 150
Factory Address : Lot C6, Dong Tho Industrial Zone, Bac Ninh District, Vietnam
Factory space (m2) : 6,000
Charter Capital (USD) : 500,000
Turnover in 2014 (USD) : 6,065,660
Main Technology : Plastic injection mold, Die casting mould
Main Customers : Honda, Yamaha, Nissin, Panasonic …
Quality Certificates : ISO 9001:2008
Other information : N/A
Contact Information
Person in charge : Mr. Nguyen Xuan Huy
Position : Director
Address (Office) : 69 Kim Hoa, Phuong Lien, Dong Da District, Ha Noi
Tel : +84 - 241 388 3920
Fax : +84 - 241 388 3921
Email : huy.nx@vpms.com.vn
Website : N/A
Selling Items
Product name: Punching Mold Product name: Blow Mold
Use for: Component production Use for: Production
Minimum lot: 10,000 pcs Minimum lot: 10,000 pcs
Material: Metal Material: Metal
Company Profile
Establishment Year : 2002
Number of Employees : 100
Factory Address : Km12, 1A Highway, Van Dien Town, Thanh Tri District,
Hanoi, Vietnam
Factory space (m2) : 1,200
Charter Capital (USD) : 450,000
Turnover in 2014 (USD) : 250,000
Main Technology : Mechanical
Main Customers : Fujipla, FKK, Fukoku, Rhythm, Sankyo, Osawa,…
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. TRINH BA NGOC
Position : Director
Address (Office) : Km12, 1A Highway, Van Dien Town, Thanh Tri District,
Hanoi, Vietnam
Tel : +84 - 4 36 814 158
Fax : +84 - 4 36 814 158
Email : vietuc68@gmail.com / trinhbangoc@yahoo.com
Website : http://cokhivietuc.com
Selling Items
Product name: Progressive Product name: Assy part
Press Die Use for: Automotive industry
Use for: Automotive Part Minimum lot: 10,000 pcs
Minimum lot: 1 set Material: Copper, Carbon Steel,
Material: SKD 11 Stainless Steel etc.
Thickness: 0.5 ~ 3.2 mm
Product name: Progressive Product name: Heatsink
Press Die Use for: A/V receivers, amplifier
Use for: Audio equipment Minimum lot: 10,000 pcs
Minimum lot: 1 set Material: Aluminum
Material: SKD 11 Thickness: 0.5 ~ 6.0 mm
Company Profile
Establishment Year : 2009
Number of Employees : 60
Factory Address : Lot 28, Quang Minh Industrial Zone, Me Linh District, Hanoi, Vietnam
Factory space (m ) 2
: 1,836
Charter Capital (USD) : 1,000,000
Turnover in 2014 (USD) : 865,000
Main Technology : Press / Anodizing / Surface treatment
Main Customers : Japanese, Korea, Taiwan, Vietnam
Quality Certificates : ISO 9001- 2008 ,5S
Other information : Manufacturing Metal Components for the following industries:
Automotive, Air-Conditioning, Electrical and Electronic Appliances, Printer Parts, Contact
Terminals.
Single-Press Die / Progressive Press Die Design & Fabrication, Surface treatment, Heat
treatment, Aluminum Anodizing etc.
Contact Information
Person in charge : Mr. Nguyen Quang Vinh
Position : General Manager
Address (Office) : Lot 28, Quang Minh Industrial Zone,
Me Linh District, Hanoi, Vietnam
Tel : +84 - 4 - 35251477
Fax : +84 - 4 - 3525 1479
Email : vinhnq@vi-vision.com
Website : http://www.vi-vision.com
Selling Items
Product name: Mold accessories Product name: Molds
Use for: Molding Use for: Molding
Minimum lot: 1 pc Minimum lot:1/set
Material: SKD61 Material: S50C
Company Profile
Establishment Year : 2011
Number of Employees : 110
Factory Address : Minh Hoa 2, Minh Khai Commune, Hoai Duc District, Hanoi, Vietnam
Factory space (m2) : 1,800
Charter Capital (USD) : 250,000
Turnover in 2014 (USD) : 1,500,000
Main Technology : CNC cutting
Main Customers : Panasonic System Network Co.,Ltd; Toyota Vietnam Co.,Ltd,
Fujikin Vietnam Co.,Ltd; Daiwa Vietnam Co.,Ltd;
Quality Certificates : N/A
Other information : N/A
Contact Information
Person in charge : Mr. Do Xuan Minh
Position : Director
Address (Office) : 7th Floor, A1 – 1, A2 – 2 Tower, Le Duc Tho street, My Dinh
Commune, Tu Liem District, Ha Noi, Viet Nam
Tel : +84 - 4 - 6684 4282
Fax : +84 - 4 - 3734 9267
Email : info@ yamaguchi.vn
Website : http://www.yamaguchi.vn
JICA is in charge of administering all Japanese ODA such as technical cooperation, ODA
loans and grant aid in an integrated manner, except contributions to international organizations. JICA, the world’s
largest bilateral aid agency, works in over 150 countries and regions and has some 100 overseas offices.
President : Mr. Akihiko Tanaka
Date founded : October 1, 2003
Capital : 7,832 billion yen as of March 31, 2014
Staff : 1,845 as of March 31, 2015
They are supplemented at any one time by thousands of Japanese experts and young and senior
volunteers on both short-term and long-term contracts.
Organization Activities
1. Background of JICA’s activities for SME/SI development in Vietnam
The development of Small and Medium Enterprises (SMEs) and Supporting Industries (SIs) is one of the essential issues
for the achievement of promotion of economic growth and international competitiveness of Vietnam. As the Japanese
largest ODA-implementing agency, JICA Vietnam office is strongly implementing various kinds of ODA activities for
SME/SI development as follows.
Contact Information
Person in charge : Mr. TAKASHI MATSUSHITA
Position : Senior Project Formulation Advisor, Vietnam Office
Address (Office) : 11th Floor, CornerStone Building, 16 Phan Chu Trinh, Hanoi, Vietnam
Tel : +84-4-3831 5005
Fax : +84-4-3831 5009
Email : Matsushita.Takashi.2@jica.go.jp
Website : http://www.jica.go.jp/vietnam/index.html
VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
organization
The Vietnam Trade Promotion Agency (VIETRADE) is a governmental organization of Vietnam responsible for national
regulation of trade and investment promotion for development of industry and trade.
VIETRADE provides a wide spectrum of services to assist Vietnamese and foreign enterprises in their business
development and expansion.
Organization Activities
- Proposing to the government on policies and measures for the development of business support activities,
national branding programs, and investment for development of industry & trade
- Providing business information to trade support institutions and enterprises,
- Conducting market research and analyses for the purpose of formulating national trade promotion policies,
- Assisting Vietnamese and foreign enterprises to identify business opportunities, customers, suppliers and
partners through dispatching trade missions abroad, hosting foreign business missions to Vietnam, and
organizing business meetings, seminars and conferences for Vietnamese and foreign enterprises,
- Regulating, in coordination with relevant authorities, all commercial advertising activities, sales promotion
activities and trade fairs in Vietnam,
- Administering the National Branding Program; assisting Vietnamese enterprises in building, promoting and
protecting their product brands,
- Administering, in coordination with relevant authorities, the National Trade Promotion Program,
- Assisting and guiding local industry & trade departments, trade support institutions in Vietnam, and overseas
trade representative offices in trade promotion and in investment promotion for industry development,
- Training Vietnamese enterprises and trade support institutions in trade promotion and in investment
promotion for industry development
- Producing trade & industry television programs, and
- Cooperating with international and foreign organizations in trade promotion and in investment promotion for
industry development.
Contact Information
Address (Office) : 20 Ly Thuong Kiet Street, Hoan Kiem District, Hanoi City, Vietnam
Tel : +84 - 4 - 3936 4792
Fax : +84 - 4 - 3936 9491
Email : vietrade@vietrade.gov.vn
Website : http://www.vietrade.gov.vn
VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
organization
With the aim of contributing to further development of economic relations between Vietnam and Japan and to the
achievement of the prosperity in the region, the Representative Office in Hanoi has been conducting and involving in
many various activities that brought mutual benefits to entrepreneurs of the two countries since its establishment in
1993.
Organization Activities
• Offer expert consultation with the latest legal writings and information relating to tax, customs, labor and
investment procedures to Japanese investors who wish to invest or do business in Vietnam,
• Receive Japanese study missions to Vietnam for investment and business opportunities in Vietnam,
• Provide Japanese investors particularly SMEs with office space and facilities free of charge to promote their
business and investment in Vietnam,
• Hold business matching between Japanese and Vietnamese enterprises in various fields,
• Organize an exhibition on supporting industries to match Japanese buyers with Vietnamese sellers,
• Hold workshops guiding new laws and regulations on Vietnam’s business and investment issues for existing
Japanese enterprises who are operating in Vietnam,
• React to inquiries from local and Japanese companies seeking information about potential partners,
• Create business chances for Vietnamese importers by inviting them to visit specialized trade fairs and
production bases in Japan in fields of foodstuff, beverage, agriculture and supporting industries,
• Make a comparative survey of investment-related costs in major cities in the region and in Asia every year,
• Conduct an annual survey of current operation of the Japanese-affiliated firms in Asia and Oceania.
Contact Information
JETRO Hanoi Office JETRO Ho Chi Minh Office
Address (Office) : Address (Office) :
Floor 2, 63 Ly Thai To Street, Hoan Kiem District, Floor 14, Sun Wah Tower, 115 Nguyen Hue Street,
Hanoi City, Vietnam District 1, Ho Chi Minh City, Vietnam
Tel : + 84-4-3825 0630 Tel : + 84-8-3821 9363
Fax : + 84-4-3825 0552 Fax : + 84-8-3821 9362
Email : vha@jetro.go.jp Email : vho@jetro.go.jp
Website : http//:www.jetro.go.jp
VIETNAM - JAPAN
SUPPORTING INDUSTRIES EXHIBITION
Ly
HOAN KIEM
Hang
Th
Khay LAKE
Toai
METROPOLE
HOTEL
MELIA Trang 63 Ly Thai To
u
HOTEL Tien
Ba Trie
Ly Th
u ong K 20 Lý
iet
Thường Kiệt
Trinh
n
Tran H
ye
ung Da
Ngo Qu
HILTON
Ly
o
ieu
OPERA
Th
Phan Ch
HANOI
K
ai
CULTURAL PALACE HOTEL
Tran H
Yet
To
u ng Da
o