Professional Documents
Culture Documents
Submitted To: Submitted by
Submitted To: Submitted by
Lab Report
On
4 to 1 Multiplexer
APPARATUS REQUIRED:
THEORY:
Multiplexer is a combinational circuit that has maximum of 2n data inputs, ‘n’ selection lines
and single output line. One of these data inputs will be connected to the output based on the
values of selection lines.
n
Since there are ‘n’ selection lines, there will be 2 possible combinations of zeros and ones. So,
each combination will select only one data input. Multiplexer is also called as Mux.
4x1 MULTIPLEXER:
4x1 Multiplexer has four data inputs, named X3 or I3, X2 or I2, X1 or I1 & X0 or I0 and two
selection lines S1 & S0 and one output Y. The block diagram of 4x1 Multiplexer is shown in
the following figure.
LOGIC DIAGRAM:
Truth Table
1. First we have given biasing to the ICs from the simulation website ‘Tinkercad’
and designed the converter as per the circuit diagram.
2. Then we have applied various combinations to input and verified the output to form a
truth table.
REPORT:
3. After converting from 4x1 Multiplexer we have tested the results with the LED and
found out that all the different inputs for 4 Multiplexer works properly and turns into 1.