Professional Documents
Culture Documents
Opening Calculator v1 1
Opening Calculator v1 1
1
Click on the Desired Brace Geometry
This spreadsheet has been prepared in accordance with information made available to the American Institute of
Steel Construction, Inc., AISC Marketing, LLC, and the Steel Solutions Center, LLC at the time of its
preparation. While it is believed to be accurate, it has not been prepared for conventional use as an engineering
or construction document and should not be used or relied upon for any specific application without competent
professional examination and verification of its accuracy, suitability and applicability by a licensed engineer,
architect or other professional. AISC, AISCM, and SSC disclaim any liability arising from information provided
by others or from the unauthorized use of the information contained in this spreadsheet.
Trademarks licensed from AISC
Bay Width = 24 ft
t = 8 in
Link Length
2 ft
Centerline
Detail A
Brace Length
14.87 ft
A Story Height
Door
Height 10 ft
8 ft
42.27 deg
Brace Angle
Door Width
4.42 ft
Note: The effect of gusset plates is not considered in these calculations
Door Width = 4.42 ft
Step 1: Required Input (4 White Boxes)
Bay Width = 24 ft
Link Length 2 ft
Brace Lengths
B 14.14 15.62
Story Height
Door
Height A 10 ft
8 ft
d = 12 in
Centerline
Detail A Detail B
Note: The effect of gusset plates is not considered in these calculations
Minimum Link Length = 6.25 ft
Step 1: Required Input (4 White Boxes)
Bay Width = 24 ft ft t = 8 in
Link Length
2 ft
Centerline
Detail A
Brace Length
B 24.17
Story Height
A 10 ft ft
Door
Height
8.41 ft Centerline
24.44 deg
Brace Angle
d = 12 in
Door Width
6 ft
Detail B
Note: The effect of gusset plates is not considered in these calculations.
Door Height = 8.41 ft