alserteknik Change of Lid Springs
data sheet
PURPOSE : The purpose of this data sheet is to provide info fort he change of lid springs
APPLICATION
5.1.1 Take care to cut off power connection ~ remove the plug from Mains
5.1.2 Remove the metal extnetion of the chimney and then the ceramic tube
into furnace
entering
5.1.3 Remove screws of the back lid
5.1.4 Take off the lid by lifting , take off the earth cable on the lid
HAZIRLAYAN | [~_KONTROL EDEN ONAY DOKUMANNO |
Kalite Sistem Sorumiusu] | Firin Imalat Koordinatoru| | Tmalat ve Tasanm Ma
1.7565
F.02/22.7 2002-1‘Sayfa No 2
Change of Lid Springs Yirdrlik Tarihi : 16.10.2018
data sheet Revizyon No
Yayimianma Tarihi:16.10.2018|
5.4.5 Take off the thermocouple connection and also disengage the compention cable
5.1.6 Take off the terminal connections , this will free the inner case
5.1.7 There are 4 screws connecting the inner case to the outer case , unscrew them
5.1.8 The inner case will be then capable of removing by sliding , pick it away
HAZIRLAYAN KONTROL EDEN
‘ONAY DOKUMAN NO
Kalite Sistem Sorumiusu] — [Firin Imalat Koordinatru
Imalat ve Tasarim Md
1.7565
.02/227.2002-1Change of Lid Springs
data sheet
5.1.9 While the new spring is to be installed the lid ‘Must be Open”
5.2.0 Replace it! And give the tension required on the spring
HAZIRLAYAN KONTROL EDEN ‘ONAY DOKUMAN NO
Kalite Sistem Sorumlusu] _Firin Imalat Koordinatrd| | Imalat ve Tasanm Md.
1.7565
F.02/227.2002-1Change of Lid Springs
data sheet
5.2.2 Do not give a tension more than necessary
5.2.3 Try to have the same tension on both lids.
5.2.4 Reinstall. every part back ( inclu
Sayfa No 74
Yarirlik Tarihi ; 16.10.2018
Revizyon No
|Yaymianma Tarihi:16.10.2018|
ig the inner case and crelated connections.
HAZIRLAYAN
KONTROL EDEN
‘ONAY
DOKUMAN NO
Kalite Sistem Sorumiusu
Firin Imalat Koordinatéri
Imalat ve Tasarim Md
1.7565
02 /22.7.2002-1