Professional Documents
Culture Documents
1.10 HC-002 - Railway Double Track - by Component Method
1.10 HC-002 - Railway Double Track - by Component Method
1.10 HC-002 - Railway Double Track - by Component Method
Step 1
– Create new project
– Type name < R-002 – Railway - Double Track >
– Go to menus select < Kross X - Cross sections - Quantity >
– Select main menu < Levels >
– Select sub menu < Declare >
– Declare levels -: BLANKET, SG, EMB, CUT ,CUT-SIDE,CUT-DRAIN,BALLAST,SLEEPER
– [Check <L/R>, Uncheck <Survey> ]
– Import survey data
– Select < Levels >
– From sub menu < Read file >
– Select OGL file and Click < Open >
Step 2
– Select main menu < Parameters >
– Select sub menu < Declare >
– Declare parameters as follows
1
CalQuan India, Email: info@calquan.com, Website: www.calquan.com, Tech Support: 9730077215
Step 3
– Go to main menu < Types >
– Select sub menu < Assign >
– Declare types and assign types - Fill-R, Fill-L
Step 4
– Go to main menu < Build Definition >
– Select sub menu < Points>
– Select => Point Group
– Select style X-Y-Sl => X-Y
2
CalQuan India, Email: info@calquan.com, Website: www.calquan.com, Tech Support: 9730077215
3
CalQuan India, Email: info@calquan.com, Website: www.calquan.com, Tech Support: 9730077215
Step 5
– Select => Component Group
Layer BALLAST
– Name = BALLAST-R
– Side = Right
– Connection Point = CEN-BALLAST-R
– Width Top = W-TOP-BALLAST
– W-1 = W-1
– SL-Top = SL-TOP-BALLAST-R
– SL-1 = SL-1
– SL-Outer = SL-SIDE-BALLAST
– SL-Bottom = SL-CW-R
– Thickness = T- BALLAST
4
CalQuan India, Email: info@calquan.com, Website: www.calquan.com, Tech Support: 9730077215
Layer BLANKET
– Name = BLANKET-R
– Side = Right
– Width-CW-Inner = 0
– Width-CW-Outer = W-CW-R
– Top Slope = SL-CW-R
– Thickness = T- BLANKET
– Conn Point = CEN-R
– Side Slope (In) = Ver
– Side Slope (Out) = SL-SIDE-R
5
CalQuan India, Email: info@calquan.com, Website: www.calquan.com, Tech Support: 9730077215
Layer SG
6
CalQuan India, Email: info@calquan.com, Website: www.calquan.com, Tech Support: 9730077215
Layer EMB
– Name = EMB-R
– Side = Right
– Upper Layer = SG-R
– Toe Slope Outer = SL-SIDE-R
– Toe Slope Inner = 999 (Ver Down Left)
– Ground Level For Toe = OGL
7
CalQuan India, Email: info@calquan.com, Website: www.calquan.com, Tech Support: 9730077215
Layer CUT
– Name = CUT-R
– Side = Right
– Upper Layer = SG-R
– Toe Slope Outer = 1
– Toe Slope Inner = -999 (Ver Up Left)
– Ground Level For Toe = OGL
8
CalQuan India, Email: info@calquan.com, Website: www.calquan.com, Tech Support: 9730077215
Layer SLEEPER
– Name = SLEEPER-R
– Side = Right
– Width-CW-Inner = 0
– Width-CW-Outer = W-TOP-BALLAST
– Top Slope = 0
– Thickness = 0.1
– Conn Point = BALLAST-R-I-1
– Side Slope (In) = Ver
– Side Slope (Out) = Ver
9
CalQuan India, Email: info@calquan.com, Website: www.calquan.com, Tech Support: 9730077215
10