Professional Documents
Culture Documents
150 Lb. Flanges I: Welding Neck
150 Lb. Flanges I: Welding Neck
flanges I
welding neck manufacture: *150 lb flanges are carbon steel furnished to ASTM
specifications A105 grade 1. ASTM A105 is the same as Boiler Con-
struction C Specification SA105. Flanges furnished faced.
drilled, and spot faced or back faced.
+Thread lengths for 150 lb flanges are American Standard for Pipe
Threads ASA B2.1. Add depths or height of facing to thread length.
+Lengths of alloy steel stud bolts include the thickness of two nuts,
but do not include height of points.
+Length shown does not include thickness of lap. For lapped to
lapped, add thickness of both laps; for lapped to hi, inch raised face
add one thickness of lap; for lapped to any other facing, add
amount that such facing and one lap will cause the flanges to be
separated.
I
1% 5 % % 23(6
2 6 .s4 3% 3'4 348
, 4% 3 3% 2% 22 1 1
2% 7 7% 4% 39(6 YB 5% 3% 3% 3 2% 1% 1%
3 71/2 % 5 4% % 6 32 4 3 2% 13(6 1)(6
32 82 % 52 413(6 % 7 32 4 3 2% 1% 11/2
4 9 5% 71/2 31/2 4 3.. 3
CO COCO
r- x
1 B-1
Y
1
slip-on blind
-0
04
2
C■1
1.11 1.09 .82 % 1:05 X6 A
1 1.38 1.36 1.05 9(6 1.32 % IA 3. 4 23/2
co)
1% 1.97 1.95 1.61 3 1.90 4
1 4 )(6 4
2 2.46 2A4 2.07 1 2.38 3 1'6 % '
A 6
CO
CO
CO