Professional Documents
Culture Documents
3BHS012049 E02 - REV - UF D128A Datasheet ABB
3BHS012049 E02 - REV - UF D128A Datasheet ABB
Data Sheet
Features Highlights
Low-cost versatile connector AC 800PEC OM-I-V10 Versatile Optical Modules are used
3 or 6 links per module to interface the AC 800PEC system to remote devices
1 mm POF or 200 µm HCS cable connected by optical fiber cables. The modules support
10 Mbp/s the Agilent Versatile fiber system.
Up to 120 m The module converts optical signals from/to LVTTL-
Safe driver shut-down signals. The optical signals are transmitted and received
Configurable power for optical transmitters by means of optical fiber cables.
I2C EEPROM for data storage The transmitter power is configurable to a low- power and
a high-power mode. The low-power mode is used for
smaller systems with short POF cables. The high-power
mode is used for systems with long cables and in systems
utilizing HCS cables.
An independent input is supported for safe shut-down of
all transmitters. Safe shut-down is typically used during
system start-up or for watchdog functionality.
For module identification and non-volatile data storage an
EEPROM (I2C-bus) is available.
EEPROM
I2C
X1 X2
OE
RX / IO 01
RX / IO 03
RX / IO 05
RX / IO 07
RX / IO 09
RX / IO 11
TX / IO 02
TX / IO 04
TX / IO 06
TX / IO 08
TX / IO 10
TX / IO 12
Simplified
Block Diagram
Specifications are subject to change without notice
© Copyright 2004 ABB. All rights reserved.
Power Electronics
CH-5300 Turgi / Switzerland