Professional Documents
Culture Documents
XU D150 AC 800PEC CEX-BUS Module Data Sheet: Features Highlights
XU D150 AC 800PEC CEX-BUS Module Data Sheet: Features Highlights
XU D150 AC 800PEC CEX-BUS Module Data Sheet: Features Highlights
AC 800PEC
CEX-BUS Module
Features Highlights
Interface to ABB specific Communication The AC 800PEC CEX-Bus Interface Card provides
Expansion Bus different functionalities, which extend the PEC800 system.
I²C Real Time Clock with Timekeeping Backup A CEX-Interface allows connection to the ABB specific
Capacitor and 56 Byte SRAM Communication Expansion Bus (CEX-Bus). The interface
works as simple data converter of the fast 64Mbit LVTTL
RS-232 serial Interface with up to 250kBit/s
to LVDS signals and vice versa. It is possible to use the
Alternative RS-422 serial Interface with up to Interface by a CEX-Master or a CEX-Slave of a Backup
12Mbit/s System CPU.
PEC800-Watchdog supervision The second interface allows the connection of a standard
I²C EEPROM for data storage serial interface. It is primarily designed to connect an ABB
Process Panel. Galvanic isolation allows the connection of
devices in harsh industrial environments. The CEX-
Interface Card can either be ordered with a RS-232 or a
RS-422 interface.
The Real Time Clock (RTC) functionality provides time
and date information, which can be used by PEC800
applications. Communication with the RTC is done over
I²C-Bus. A backup capacitor guarantees timekeeping
during power off conditions.
Another fully independent feature of the
AC 800PEC CEX-Bus Interface Card is the watchdog
supervision functionality. An input toggle signal supervises
the AC 800PEC Controller and activates the SHUTDOWN
of the optical module transmitters in case of a failure.
For module identification and non-volatile data storage an
EEPROM (I²C-Bus) is available.
CEX-Interface Card
PEC800
FPGA CEX I/O driver
AB1-X4
CEX-Bus
CEX CEX
master Bus
and
slave
Real Time 32.768kHz
Clock
ANY I/O
X5
1mF
I²C Bus +24V
Cap
Power
X3
2kBit I²C
EEPROM Supply
Toggle
signal
PEC800 Serial interface
AB1-X1
Shutdown Watchdog driver RS-422
RJ45
or
PEC800 RS-232
UART Interface
Simplified
Block Diagram
and Slave FPGA cores. Day of Week, Date of Month and Year date
modules Watchdog
+24V power supply cable: 3BHE014141R0001 Supervision of PEC800 controller
Power Electronics
CH-5300 Turgi / Switzerland