Professional Documents
Culture Documents
Nitocote Putty: High Quality Ready To-Use Putty
Nitocote Putty: High Quality Ready To-Use Putty
Surface preparation Nitocote Putty does not fall into the hazard classifications. Suit-
able protective gloves and goggles should be worn. Splashes
Ensure that dust, dirt and foreign matter is brushed away.
on the skin should be removed with water.
Ridges and form oil must also be removed.
Fire
Priming
Nitocote Putty is water based and non-flammable.
To stabilise a surface which shows signs of dusting or flaking,
the use of a separate primer is recommended.
page 1 of 2
Nitocote® Putty
Additional Information
fluid micro-concretes
Important note :
Fosroc products are guaranteed against defective materials and manufacture and are sold
subject to its standard terms and conditions of sale, copies of which may be obtained on
request. Whilst Fosroc endeavours to ensure that any advice, recommendation specification
or information it may give is accurate and correct, it cannot, because it has no direct or
continuous control over where or how its products are applied, accept any liability either
Fosroc Chemicals directly or indirectly arising from the use of its products whether or not in accordance with
any advice, specification, recommendation or information given by it.
(India) Pvt. Ltd.
Head Office telephone fax e-mail
Embassy Point, No. 150,
2nd Floor, Infantry Road, +91 80-42521900 +91 80-22281510 enquiryindia@fosroc.com
Bangalore 560 001,
Karnataka
Regional Offices
www.fosroc.com
page 2 of 2 INDIA/2019/0416/A