Professional Documents
Culture Documents
Auto Transfer Switch & Mains Control Module: Genset
Auto Transfer Switch & Mains Control Module: Genset
DSEGenset
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30oC
The DSE8660 is an easy-to-use Comprehensive communications With all communication ports BS EN 60068-2-2
single or multi-mains controller with are also available via RS485 and capable of being active at the same Bb/Be Dry Heat +70oC
automatic transfer switch capability. RS232 for remote PC control and time, the DSE8600 Series is ideal VIBRATION
Designed to synchronise single or monitoring, and integration into for a wide variety of demanding BS EN 60068-2-6
multiple DSE8610s with single or building management systems. load share applications. Ten sweeps in each of three major axes
5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
multiple mains (utility) supplies, the The comprehensive event log will
DSE8660 will automatically control record up to 250 events to facilitate KEY LOAD SHARE FEATURES: HUMIDITY
• Peak lopping BS EN 60068-2-30
the change over from mains (utility) maintenance. Db Damp Heat Cyclic 20/55oC @ 95% RH 48
to generator supply or run generators • Sequential set start Hours
in synchronisation with the mains An extensive number of fixed and • Manual voltage/frequency BS EN 60068-2-78
adjustment Cab Damp Heat Static 40oC @ 93% RH 48
(utility) to provide no-break, peak flexible monitoring and protection Hours
lopping and peak shaving power features are included. Easy • R.O.C.O.F. and vector shift
• Generator load demand SHOCK
solutions. alteration of the sequences, timers BS EN 60068-2-27
and alarms can be made using the • Automatic hours run balancing Three shocks in each of three major axes
The module can indicate DSE PC Configuration Suite • Mains (Utility) de-coupling 15gn in 11mS
operational status and fault Software. Selected configuration is • Mains (Utility) de-coupling
DEGREES OF PROTECTION
conditions on the LCD screen also available via the module’s front test mode PROVIDED BY ENCLOSURES
• Bus failure detection BS EN 60529
(multiple languages available), by panel. IP65 - Front of module when installed into the
illuminated LED, audible sounder • Volts and frequency matching. control panel with the supplied sealing gasket.
and SMS messaging.
DSENET ®
RS232 AND USB USB CONFIGURABLE DC OUTPUTS DC POWER
EXPANSION RS485 PORT HOST INPUTS SUPPLY 8-35V
+
ETHERNET
DSE8660 MSC
7
8610 8610 8660
OTHER
ISSUE 2
®
DSEGenset
DSE8660 SPECIFICATION
DC SUPPLY
AUTO TRANSFER SWITCH & MAINS CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CONTROL MODULE CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout
FEATURES and supply recovers to 5 V. This is achieved
without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.
FREQUENCY RANGE
3.5 Hz to 75 Hz
OUTPUTS
OUTPUTS C & D
8 A at 250 V AC (Volt free)
DIMENSIONS
OVERALL
240 mm x 181 mm x 42 mm
9.4” x 7.1” x 1.6”
PANEL CUT-OUT
220 mm x 160 mm
8.7” x 6.3”
RELATED MATERIALS
TITLE PART NO’S
DSE8660 Installation Instructions 053-070
DSE8660 Operator Manual 057-120
DSE8600 PC Configuration Suite Manual 057-119
DSE8610 Data Sheet 055-083
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-086/10/10 (2)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457