Mercantile Marine Management: M/V "Safmarine Longa"

You might also like

Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 2

Mercantile Marine Management Date:-

M/V "SAFMARINE LONGA"

Yes No Remarks
1 M/E L/O pressure normal,Pump condition checked, st-by on
2 M/E HT Cool pressure normal,Pump condition checked, st-by on
3 M/E LT Cool pressure normal,Pump condition checked, st-by on
4 M/E Fuel pressure normal,Pump condition checked, st-by on
5 Main S/W pump pressure normal,Pump condition checked, st-by on
6 Condition of the Fuel module & Viscotherm checked, st-by unit on
7 Cy. Oil pump checked, normal and st-by pump on.
8 M/E Cy Head plat rounds taken, normal and no any oil/water/air leak
9 M/E T/C checked, oil flow normal and no vibrations.
10 Cy. Alpha lubricating units checked and working normal.
11
F/O serv and sett tanks checked, water drained & level normal, F/O transfer
p/p on auto
12 H/T cooler checked. Temperatures and valve position normal
13 L/T cooler checked. Temperatures and valve position normal
14 L/O cooler checked. Temperatures and valve position normal
15 Hot-well level normal, filling on auto, condensor condition normal
16 Evaporator salinity, press, feed & temp. normal. Filling to desired tank.
17 Boiler feed pump checked,press normal & no leaks, st-by on auto
18 Air compressor on auto, oil level checked and filling valves opened.
19 Air bottles press checked, drained and main and service valves opened.
20 Boiler F/O suply pump checked and normal and no leaks.
21 Air dryer checked and normal.
22 F/O purifier checked flow & temp normal and filling to service tank.
23 L/O purifier checked flow & temp normal and filling to service tank.
24 Oil mist detector on and working satisfactorily.
25 Intermeadiate bearing checked oil level and temperature normal
26 Stern tube Fwd & aft seal oil tank level normal.
27 Stern tube temperature normal
28 Aft bilge well level checked and free of oil and leakages.
29 L/O pump ckecked and fly wheel area checked for water leakages.
30 M/E thrust bearing temperature checked and normal.
31 Piston cooling oil flow checked and normal.
32 M/E crank case doors felt over and temperature and feeling normal
33 M/E scavange drain tank checked, pipe felt over and inlet valve opened.
34 Bilge pump and O W S off and O/B valve shut.
Main S/W , Ballast, G/S and Bilge pump checked and Fire pump suc disc valves
35 opened.
36 Pipe tunnel checked and no water or oil .
37 Port and Stbd bilge wells checked, level normal and no any leaks.
38 M/E UP area checked, Fuel cam inspected through sight glasses
39 M/E emergency manu. Station all parameters checked and normal.
40 Air cooler cooling water pipe felt over, air in/out temps normal.
41 Hydroph., potable and Hot water tanks and pumps checked and normal.
42 Running generator all parameters checked and normal and no oil leaks.
43 St-By Gen air opened, leaver in start position and ready.

45 Cy. Oil day tank level normal, filling pump on auto and valves opened.
46 Fridge comp normal and cool room temperatures normal.
47 Incinerator switched off, no firing and valves closed.
48 Boiler water level normal and no steam or water leaks from mountings.
50 H.T and L.T header tank level checked and normal.
51 A/C compressor on/off and heating opened/shut.
52 Funnel checked normal and and smoking.
53 Emergency generator checked and on auto mode.
54 Stearing unit and tank oil level checked and normal.
55
ECR Gen switch board all parameters normal. St-by Gen on auto and ready to
start.
56
In ECR contro console M/E and Aux machinery all parameters checked &
normal, st-by pumps are on
57 Alarm pannel checked and no alarms on
58 Tank control pannel checked and no bilge alarms are on.
59 Duty Eng and Back up selected from the duty alarm panel.
60 M/E RPM within limit and controls on Bridge control.
61 Bridge informed and E/Room locked.

………………………… …………………………….
Duty Engineer Duty Cadet/oiler/fitter

You might also like