Professional Documents
Culture Documents
Fuelbank: Bunded Storage and Dispensing Units
Fuelbank: Bunded Storage and Dispensing Units
FuelBank
Tanks can be built to customer specific requirements
Tank options Optional Equipment
460mm Ladder
Manways
500mm Level Gauge Bunded storage and dispensing units
600mm Level Switch
Full fuel management
control BSP Sockets Sight Glass • New Environment Agency legislation now in place for pollution control
Connections PN Flanges Dipstick
• All above ground fuel storage over 200 litres must be bunded
150# Flanges Fuel Pump (45-130 Lpm)
• Existing tanks must comply by September 2005
Red Oxide Venting Systems
Construction code • Cookson and Zinn have over 45yrs experience in storage tank manufacture
Paint System Alkyd 2 Coat Overfill Alarm
Environment agency PPG2 • FuelBank is the superior fuel storage package
Generally to BS 799 part 5 Epoxy 3 Coat Overfill Prevention Valve
• All fill, vent and suction pipework within bund area
Material Internal Coating available Offset Fill Pipework
Carbon Steel
Single Delivery to Site
• 5,000 - 80,000 litre capacity
BS EN 10025 S275 JR • Secure fuel pump cabinet
Compartment Double Delivery ex Works
Triple Other specific requirements
tel. +44 (0) 1473 825200 fax. +44 (0) 1473 828446 email. info@czltd.com
FB-01-02/05
www.czltd.com
By September 2005 all above ground storage tanks over 200 litres used for all
Fuel management
Ladder
Technical innovation and cost effective design Sophisticated manufacturing techniques guarantee Fuel tanks made to suit your precise requirements or, A finished FuelBank, delivered to your site ready for immediate operation
come together for maximum customer benefit highest product integrity and extended maintenance if preferred, standard units are available SIMPLE, EFFECTIVE, PROBLEM FREE
free life
Environmental Awareness Designed and Built FuelBank Unique by Design Concept to Completion
The importance of safeguarding the With unparalleled experience in designing From 5,000 litres to 80,000 litres in cylindrical It is insufficient to offer this high-quality FuelBank system on
Level guage environment has never been more fuel storage systems, CZ offer the FuelBank or rectangular form, CZ can offer a specifically- its own. CZ is aware that renewing or refurbishing existing
important or of higher profile than it bunded unit, a product at the forefront of tailored bunded unit or, if you prefer, a totally installations, or buying new, needs careful thought and planning.
is today. Not only is there a general storage tank technology. standard system ready for you to fill with fuel. This is where our years of experience can help you.
acceptance that our environment needs Controlled by an accredited ISO 9001 quality Let us guide you through this minefield of legislation and from
protecting but recent EU legislation means system, CZ is able to supply a complete Full in-house CAD draughting facilities and your initial concept we can take you stage by stage to final
that it is mandatory for all existing and packaged assembly with either a cylindrical or Finite Element Analysis for the trickier sites commissioning.
future installations to have the necessary rectangular tank, single or multi-compartment, means no installation is too difficult. If vertical
safeguards included. and any of the following: cylindrical units would suit your site layout How are we able to do this?
better, we can offer a package for that as well.
Fuel pump
With over 45 years’ experience in the • Totally enclosed bunded system Access steelwork can be shop manufactured, • Visit your premises for discussions at an early stage
design of fuel storage systems, Cookson • Compatibility with fuel management trial erected at works and then finally located • Advise on current legislation
and Zinn can put forward many products system on site. • Provide most cost-effective solution for your needs
which can satisfy your genuine concerns • End cabinet with roller shutter door • Liaise on removal and disposal of existing installation
and which will give you the time and • Optional equipment including dispenser, FuelBank is technically advanced, innovative and
• Design and manufacture new system
confidence to run your plant, knowing overfill prevention valves, gauging, switches, at the forefront of fuel storage technology.
that the environment is protected. • Supply all necessary extras with bunded unit
and more
• Deliver to site and install, if required
One such product is the FuelBank bunded • Structural steelwork including access
Venting systems • Offer full, on-going technical support
ladders, platforming and base supports for
fuel storage system.
bund
• Finish painting to standard or customised “From the simplest bunded unit to the most sophisticated and complex stainless
colours, including specific logos
steel process vessel, the experienced CZ design, engineering and production team,
together with quality control, are second to none. It is important to our company that
our customers should have the utmost confidence in our product quality”
Offset fill pipework
To enable continuous product development PetroTechnik Ltd. reserve the right to change design specifications at any time