Professional Documents
Culture Documents
Tehnički List - KIMISTEEL GLV
Tehnički List - KIMISTEEL GLV
ST5-0619
DESCRIPTION WORKS
Kimisteel GLV is a unidirectional reinforcement fabric • Structural reinforcing systems for masonry
made of high-resistance galvanized zinc plated filaments structures, using stainless steel fabrics with
available in different gramages. inorganic matrix (SA126)
The product can be used with inorganic matrices to achieve • Structural reinforcing systems fro RC elements,
structural consolidation of masonry, reinforced concrete using stainless steel fabrics with inorganic matrix
and prestressed reinforced concrete. (SA127)
The choice of the matrix depends on the kind of substrate
on which the product is applied, the mechanical strength, APPLICATION
the elastic modulus required for the system, the intended For different kind of works please read technical
use environment and the vapor permeability required to the documents and the TDS of the products to be used.
system.
Prepare the surfaces to be reinforced by cleaning
ADVANTAGES thoroughly from any element which may affect the
• Performing: high mechanical strength with reduced adhesion the reinforcement system and prepare
thicknesses and weights. mechanical anchoring systems or drill hole in order to
• Versatile: it can be applied on both wall structures anchor the ends of the fabric itself.
and times as well as for the reinforcement of
reinforced concrete structures; May be used with On substrates primed, apply one of the following matrices:
inorganic matrices in relation to mechanical strength, • High compressive strength mortar from Basic,
type of use environment and vapor permeability Tectoria, Limepor or Betonfix ranges .
required by the system; pre-tensioning for curl or • Epoxy resin without solvent Kimitech EP-TX (for
bandage operations. maximum mechanical and durability
• Easy to apply: fast and easy laying even in ready- performances).
made work.
After the first layer of matrix, ahile the matris is still fresh,
insert one end of the fabric in the drilled hole or in the
USES
mechanical fastening systems previously prepared, lay the
• Reinforcement for masonry structures
fabric, pre-tensioning (if provided) and secure the other end
• Creating reinforced edge beams
of the strip and, with metal spatula and / or trowel, drown
• Vault consolidation
the fabric into the matrix. While the matrix is still fresh,
• Structural reinforcement for beams and joists
apply a further coat of matrix making sure the fabric will not
• Pillar and column confinement
remain in any area exposed.
• Creating prefabricated concrete elements with light
reinforcement
The faric itself can be used to make connecting rods in
• Creating reinforced clay bricks
structural and non-structural reinforcement systems.
Proceed as follows: