Professional Documents
Culture Documents
Item Rate Boq: Validate Print Help
Item Rate Boq: Validate Print Help
Tender Inviting Authority: ADDITIONAL CHIEF ENGINEER, UPPER ASSAM ZONE, WATER RESOURCES DEPARTMENT, DIBRUGARH
Name of Work: Immediate measures for restoration of Jhanji bund L/B from flood damages of river Jhanji from Ch. 12400m to 12700m under SDRF for 2019-20.
Package No. 2 Location: At Ch. 12615M TO 12655M of Jhanji L/Bank. Amount : ₹ 22,38,680.14
Name of the
Bidder/
Bidding Firm /
Company :
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this
tender. Bidders are allowed to enter the Bidder Name and Values only )
1 2 4 5 13 53 55
1 Cutting bamboo , uprooting roots & stumpsincluding 161.34 Sqm #VALUE! #VALUE!
removing them from the site of work, etc.complete as
directed
2 Earthwork in bank trimming to the designedsection 366.84 Cum #VALUE! #VALUE!
/slope including removing the soils at a safedistance,
complete as directed.
3 Supply of Geo-textile bags of type-A (1.03X0.70M) 3934.00 Nos. #VALUE! #VALUE!
inner dimension made of Geo-textile non-woven
fabric
sheets of 400 GSM manufactured from 100% virgin
Polypropylene (PP) fibre having thickness
not less than 3.00 mm with minimum properties as (i)
Tensile strength (CD) ≥ 24 KN/m (ii)
Tensile strength (MD) ≥ 22 KN/m (ii) Mass ≥ 400.00
Gm/m ² (iii) CBR Puncture strength ≥
4100 N/m2 (iv) Elongation @ break (Warp) ≥ 54% (v)
Elongation @ break (Weft)≥ 52% (vi)
Abrasion ≥ 70 % (vii) UV Resistance @ 500 hours ≥
70% (viii) AOS ≤ 75 micron (ix)
Permittivity ≥ 1.25, (x) Trapezoidal Tear Strength ≤
520 N (xi) Permeability = 45Lt/m2/sec (xii)
Seam strength = 80 % of geotextiles strength .
Stitching of Bags should be Ring Spun Yarn
stitches with 2500-3000 denier double line chain
stitch with overlap with stitches along the
edge @ minimum 15 stitches per 100 mm.(Bags are
to be supplied of 100 numbers or part in a bundle,
properly packed with name of Manufacturer and
Batch Number is to be marked on each bag with
“WRD Govt of ASSAM” to be printed on each bag
and mentioning properly the GSM and type of Geo
bag polymer. Test Certificate from approved NABL
accredited and ISO Certified Laboratory should
invariably be submitted against each batch of
material).
4 Supply of Geo Bags Type-B (Size 2.00m x 1.50m) 656.00 Nos. #VALUE! #VALUE!
( pillow Type) inner dimension made of composite
layers of
geo-textile as per specifications below :
Woven Geo-textile for the outer cover. The woven
geo textile is woven with UV resistant slit
film tape fibre with MAVR values of the following
properties. Geo-textile used to manufacture
geo-textile bags should have high mechanical
properties for enhanced durability along with
enhanced puncture, abrasion and U.V. resistance
characteristics. Geo-textile should be inert
to biological degradation and resistant to naturally
encountered chemicals, alkalis, and acids.
Weight (ISO-9864/ASTMD 5261) ≥300 Gms/Sqm.
Tensile strength(MD) ( ASTMD 4595) = ≥35 kN/m
Tensile strength(CD) ( ASTMD 4595) = ≥35 kN/m
Tensile Elongation ( ASTMD 4595)= ≥5% & ≤30%
Grab Elongation ( ASTMD 4632)= ≥5% & ≤30%
Tensile strength ( ASTMD 4632) = 1.5 KN
UV resistance( ASTMD 4355) = 70%/500 hrsNon
woven Geo-textile for the inner layer It is needle
punched non woven geo-textile made of 100%
polypropylene staple fibers which are formed into a
random network for dimensional stability. It should
resist UV degradation, rotting and alkalis.
Weight (ISO-
9864/ASTMD 5261) ≥250 Gms/Sqm.
Tensile strength(MD) ( ASTMD 4595) = ≥12 kN/m
Tensile strength(CD) ( ASTMD 4595) = ≥12 kN/m
Tensile Elongation ( ASTMD 4595)= ≥5% &
≤30% Grab Elongation ( ASTMD 4632)= ≥5% &
≤30%
5 Supply of non-woven Geo-textile fabric sheets of 300 795.60 Sqm. #VALUE! #VALUE!
GSM manufactured from 100% virgin
Polypropylene (PP) fibre with minimum properties as
(i) Tensile strength ≥ 12 KN/m (ii) Mass
≥ 300.00 Gm/m ² (iii) CBR Puncture strength ≥ 3.5
KN (iv) Elongation at break ≥ 60% (v)
Abrasion ≥ 70 % (vi) UV Resistance @ 500 hours ≥
70% (vii) AOS ≤ 75 micron (ix)
Permittivity ≥ 1.25, (x) Trapezoidal Tear Strength ≤
340 N (xi) Permeability = 2.00 x 10 ̄ ³
m/sec (xii) Seam strength = 80 % of geotextiles
strength . Stitching of Bags should be Ring
Spun Yarn stitches with 2500-3000 denier double line
chain stitch with overlap with stitches
along the edge @ minimum 15 stitches per 100 mm.
(Each Roll of Geo Fabric Sheet should be supplied in
properly packed Bundles and should be
marked with the Name of Manufacturer & Batch
Number clearly on each bundle with “WRD
Govt of ASSAM” to be printed on it and mentioning
properly the GSM and type of polymer and
Test Certificate from approved NABL accredited and
ISO Certified Laboratory shouldinvariably be
submitted against each batch of material)FOR
GUWAHATI