Professional Documents
Culture Documents
5A Ldo Voltage Regulator: Description
5A Ldo Voltage Regulator: Description
5A Ldo Voltage Regulator: Description
DESCRIPTION
FEATURES
www.DataSheet4U.com
BLOCK DIAGRAM
Note1: The maximum allowable power dissipation is a function of maximum operating junction temperature, TJ
(max), the junction to ambient thermal resistance, θJA, and the ambient temperature Tamb. The maximum
allowable power dissipation at any ambient temperature is given: PD (max) = (TJ (max) – Tamb)/θJA, exceeding
the maximum allowable power limit will result in excessive die temperature; thus, the regulator will go into
thermal shutdown. The junction to ambient thermal resistance, θJA of some packages may be different; the
value of θJA depends on mounting technique.
TO-263-3L 60
Thermal TO-263-2L 60
θJA °C/W
Resistance
TO-220-3L 60
TO-252-2L 100
www.DataSheet4U.com
PIN CONFIGURATION
PIN DESCRIPTION
FUNCTION DESCRIPTION
The SA1084 is a LDO regulator, it’s pass transistor is made up of a single NPN transistor being driven by a PNP.
The dropout voltage is defined as: VDROP = VBE+ VSAT.
The SA1084 series of fixed and adjustable regulators are easy to use. Output voltages are 1.5V, 1.8V, 2.5V,
3.3V, and 5.0V.On-chip thermal shut down provides protection against any combination of overload and ambient
temperature that would create excessive junction temperature.
The SA1084 requires an output capacitor for device stability. Its value of 22μF tantalum covers all cases of
bypassing the adjustment terminal. Without bypassing the adjustment terminal smaller capacitors can be used
with equally good results .depends upon the application circuit. In general, linear regulator stability decreases with
higher output currents.
www.DataSheet4U.com
Figure 1. Typical Fixed Output Voltage
Note: The circuit and parameters are reference only, please set the parameters of the real application circuit
based on the real test.
www.DataSheet4U.com
PACKAGE OUTLINE
TO-252-2L UNIT: mm
1.50±0.15
3.80 REF
9.70±0.30
5.6±0.3
2.5~3.0
0.6~0.9
1.6±0.2
TO-252-2L UNIT: mm
0.9~1.25
www.DataSheet4U.com
1.80 REF
5.30REF
10.10±0.30
6.1±0.2
1.4~1.7
0.80±0.20
PACKAGE OUTLINE
TO-220-3L UNIT: mm
TO-263-2L UNIT: mm
www.DataSheet4U.com
8.70±0.20
15.25±0.25
5.28±0.20
1.5±0.20
2.54±0.20
PACKAGE OUTLINE
TO-263-3L UNIT: mm
www.DataSheet4U.com
Disclaimer:
• Silan reserves the right to make changes to the information herein for the improvement of the design and performance
without further notice!
• All semiconductor products malfunction or fail with some probability under special conditions. When using Silan products
in system design or complete machine manufacturing, it is the responsibility of the buyer to comply with the safety
standards strictly and take essential measures to avoid situations in which a malfunction or failure of such Silan products
could cause loss of body injury or damage to property.
• Silan will supply the best possible product for customers!