Professional Documents
Culture Documents
Technological Institute of The Philippines: Quezon City #938 Aurora Blvd. Cubao, Quezon City
Technological Institute of The Philippines: Quezon City #938 Aurora Blvd. Cubao, Quezon City
QUEZON CITY
CE 502
REINFORCED CONCRETE DESIGN
PREPARED BY:
DOMINGO, DANIEL L.
CE51FC1
SUBMITTED TO:
Table of Contents
CHAPTER 1 : PROJECT BACKGROUND.........................................................................................................
1.1The Project.........................................................................................................................................1
1.2 Project Location.................................................................................................................................2
1.3 Project Objectives..............................................................................................................................2
1.4 The Client...........................................................................................................................................2
1.5 Project Scope and Limitations...........................................................................................................3
1.6 Project Development.........................................................................................................................3
CHAPTER 2 : DESIGN INPUTS.........................................................................................................................
List of Figures
Figure 1-1. Perspective View of the Residential Building................................................................................1
Figure 1-2. Location Map of the Residential Building via Google Earth..........................................................2
Figure 1-3. Stages of Design Project................................................................................................................3
Figure 2-1. STAAD Pro V8i Geometric Model..................................................................................................4
Figure 2-2. Ground Level Architectural Floor Plan...........................................................................................6
Figure 2-3. 2nd to 5th Floor Plan.........................................................................................................................7
Figure 2-4. Roof Deck Plan...............................................................................................................................8
Figure 2-1. Front Elevation Architectural Plan..................................................................................................9
Figure 2-6. Rear Elevation Architectural Plan................................................................................................10
Figure 2-7. Left Side Elevation Architectural Plan..........................................................................................11
Figure 2-8. Right Side Elevation Architectural Plan........................................................................................12
CHAPTER: 1PROJECT BACKGROUND
The Project is planned to design a 5-storey residential building that will suit the nearby Bulacan State
University Tenants. The location is a rural municipality in the province of Bulacan, Philippines.
The Residential building is rectangular in shape with 5 levels with a floor area of 30m x 12m. Each level
is composed of four rental units. The total gross floor area of the residential bulding is 1800m 2. Each
residential building rental unit has two (2) bedrooms and one (1) comfort room. The residential building
has one main staircase located in the middle of the building and has an elevator next to it, as well as an
evtraemergency staircase such as fire exit,although it is not part of the structural members and is
located at the front of the building. The residential building has been designed using Reinforced
Concrete Design and its slab will be considered in comparison of using Two-way Slab versus One-way
Slab.
1
1.2 Project Location
Figure 1-2. Location Map of the Residential Building via Google Earth
The client of the residential building is a private individual, Catrina CatameoSison of Bulacan.
2
1.5 Project Scope and Limitations
1) The project was conceptualized in accordance to the National Building Code of the Philippines
and National Structural Code of the Philippines.
2) Provide structural design details.
3) The structure was design through AutoCad2016 and analyzed using STAAD Pro.
1) As for the tradeoffs, the comparison that the designer’s considered is in economic and
sustainability criterion is only focusing for the resources to be used and its cost estimate for
beams, columns and slab.
2) The cost estimates for electrical, mechanical, plumbing and architectural were not considered.
3) The Architectural interior design of the structure is not to be considered.
The first thing to do is to conceptualize the proposed project as this will be focus on the 5-storey
residential building. Next is to know its location and vicinity whereas design standards are specified so
that the designer may have its preliminary design such as its architectural and structural plan also
designers consider the design constraint as to be stated. Lastly, after understanding the design
standards and its constraints it is the time that the plans to be computed on its geometric design.
3
CHAPTER: 2DESIGN INPUTS
As the structural model represents, the residential building has 20 rental units in total from ground floor
up to fifth floor. The main stair and elevator are both located at the middle part of the building.
Emergency stair is at the front of the building.
The designers categorized the occupancy of the structure based on the codes provided by National
Structural Code of the Philippines. It is important for the structure to be categorized according to its
occupancy for it will be the basis for the parameters necessary for seismic analysis. As for the
residential building, it is categorized as Special Occupancy Structure.
4
2.3 Architectural Plans
As for the design of the 5-storey residential building, the designer considered the standard sizes of the
unit as provided by the client and specified to the list of unit sizes to maximize the lot area provided.
The architectural plans were provided by the designer for the client.
The next succeeding figures, figures 2-2 to 2-8 show the floor plans and elevation plans of the structure
applied in the design.
5
2.3.1 Floor Plans
6
Figure 2-3. 2nd to 5th Floor Plan
The figure above shows the Second to Fifth Level Architectural Floor Plan of the Residential Building having 4 units with exactly the same
dimensions and areas.
7
Figure 2-4. Roof Deck Plan
8
2.3.2 Elevation Plans
9
Figure 2-6. Rear Elevation Architectural Plan
10
Figure 2-7. Left Side Elevation Architectural Plan
11
Figure 2-8. Right Side Elevation Architectural Plan
12
13