Professional Documents
Culture Documents
Phoenix Beep Code Troubleshooting (PhoenixBIOS)
Phoenix Beep Code Troubleshooting (PhoenixBIOS)
1 Beep
High Angle View Of Beep Text On Paper In Envelope
Laura Harker/EyeEm/Getty Images
A single beep from a Phoenix based BIOS is actually an "all systems clear"
notification. Technically, it's an indication that the Power On Self Test is
complete. No troubleshooting necessary!
1 Continuous Beep
One continuous beep isn't an officially listed Phoenix beep code but I know of
several instances of this occurring. In at least one case, the solution was to
reseat the CPU.
1 Short Beep, 1 Long Beep
One short beep followed by one long beep also isn't an officially listed Phoenix
beep code but two readers have let me know about this one. In both cases, the
problem was bad RAM which replacing obviously solved.
1 Long Beep, 2 Short Beeps
One long beep followed by two short beeps indicates that there has been a checksum
error. This means that there is some kind of motherboard issue. Replacing the
motherboard should fix this problem.
1-1-1-1 Beep Code Pattern
Technically, a 1-1-1-1 beep code pattern doesn't exist but I've seen it and many
readers have too. Most often, it's a problem with the system memory. This Phoenix
BIOS issue is usually corrected by replacing the RAM.
1-2-2-3 Beep Code Pattern
A 1-2-2-3 beep code pattern means that there has been a BIOS ROM checksum error.
Literally, this would indicate an issue with the BIOS chip on the motherboard.
Since replacing a BIOS chip is often not possible, this Phoenix BIOS issue is
usually corrected by replacing the entire motherboard.
1-3-1-1 Beep Code Pattern
A 1-3-1-1 beep code pattern on a PhoenixBIOS system means that there has been an
issue while testing the DRAM refresh. This could be a problem with the system
memory, an expansion card, or the motherboard.