The document provides installation instructions for IP66 testing of FluidMesh products. It describes steps to assemble housing components, install and secure cables, connectors, plugs and other parts to prepare the devices for water and dust resistance testing. The instructions cover models FM3500ENDO, FM4500MOBI, FM4500FIBER and involve assembling housings, installing and securing cables, connectors, plugs, nuts and other components.
Original Description:
Original Title
Fluidmesh FM 3500 and FM 4500 - IP66 installation v0.1
The document provides installation instructions for IP66 testing of FluidMesh products. It describes steps to assemble housing components, install and secure cables, connectors, plugs and other parts to prepare the devices for water and dust resistance testing. The instructions cover models FM3500ENDO, FM4500MOBI, FM4500FIBER and involve assembling housings, installing and securing cables, connectors, plugs, nuts and other components.
The document provides installation instructions for IP66 testing of FluidMesh products. It describes steps to assemble housing components, install and secure cables, connectors, plugs and other parts to prepare the devices for water and dust resistance testing. The instructions cover models FM3500ENDO, FM4500MOBI, FM4500FIBER and involve assembling housings, installing and securing cables, connectors, plugs, nuts and other components.
M12 A coded 5 pins Plug Installation Recommendation 1. Remove the plastic cap. 2. Install the M12 A coded 5 pins Plug, the plug must be fully tightened in the M12 connector. 3. Before fastening the plastic cap back to the M12 connector, recommended wrapping seal tape around the thread on the M12 connector to prevent the water leaked issues.
1. Remove the plastic cap. 2. Install the M12 A coded 5 pins Plug, the plug must be fully tightened in the M12 connector. 3. Before fastening the plastic cap back to the M12 connector, recommended wrapping seal tape around the thread on the M12 connector to prevent the water leaked issues.