Connect the red wire from the serial suite to the two red pins on plug A to supply +12V power. Connect the black wire to the two black pins on plug B for the ground connection. Connect the green wire to the single green pin on plug A for the K line communication. Solder a 680 ohm resistor as shown in the picture before continuing with the bootstrap procedure.
Connect the red wire from the serial suite to the two red pins on plug A to supply +12V power. Connect the black wire to the two black pins on plug B for the ground connection. Connect the green wire to the single green pin on plug A for the K line communication. Solder a 680 ohm resistor as shown in the picture before continuing with the bootstrap procedure.
Connect the red wire from the serial suite to the two red pins on plug A to supply +12V power. Connect the black wire to the two black pins on plug B for the ground connection. Connect the green wire to the single green pin on plug A for the K line communication. Solder a 680 ohm resistor as shown in the picture before continuing with the bootstrap procedure.