This document is an FRP joint inspection form used to record inspection details for fiberglass reinforced plastic (FRP) pipe joints. It includes sections to document the date, location, pipe details, craftsmen, checklist of inspection steps, overlay fabrication details, and space for a customer inspector signature. The key information collected is to ensure the joint preparation, surface treatment, overlay installation, and inspection meet the specified requirements.
This document is an FRP joint inspection form used to record inspection details for fiberglass reinforced plastic (FRP) pipe joints. It includes sections to document the date, location, pipe details, craftsmen, checklist of inspection steps, overlay fabrication details, and space for a customer inspector signature. The key information collected is to ensure the joint preparation, surface treatment, overlay installation, and inspection meet the specified requirements.
This document is an FRP joint inspection form used to record inspection details for fiberglass reinforced plastic (FRP) pipe joints. It includes sections to document the date, location, pipe details, craftsmen, checklist of inspection steps, overlay fabrication details, and space for a customer inspector signature. The key information collected is to ensure the joint preparation, surface treatment, overlay installation, and inspection meet the specified requirements.
FRP JOINT INSPECTION FORM MAT/WOVEN THICKNESS GUIDE
(Must completed for each joint) Thickness 1.5 oz.Mat Woven
1/8" 2 1 Date: 3/16" 3 2 Customer: 1/4" 4 2 Project: 5/16" 5 3 Location(Plant/Block): 3/8" 6 4 Pipe/Joint Number: 7/16" 8 4 Job Number: 1/2" 8 5 Job Specification: 9/16" 9 6 Pipe Diameter 5/8" 11 6 Craftsman: 11/16" 11 7 Foreman: 3/4" 12 8 Foreman Signature: 13/16" 13 8 7/8" 14 9 1" 16 10 Checklist Check YES Initials Ends of Pipe Flat: Craftsman: Ends Ground to proper taper as required: Craftsman: Ends capped according to specified detail: Craftsman: Fit up according to Specifications: Craftsman: Surface Preparation (Grinding) has been completed: Craftsman: Surface has been primed: Craftsman: Primer Used: Corrosion Barrier Quality: Checked by: Barcol Hardness: Checked by: Laminate Quality: Checked by: Barcol Hardness: Checked by: Overlay Tapers: Yes ____ No ____ Layers Staggered: Yes ____ No ____ Butt Joint Centered: Yes ____ No ____ Inspected before Paint: Yes ____ No ____
Overlay to be fabricated in _____________ pieces staggered around the circumference.
Thickness of structural overlay to be _____________ Layers of mat Layers of woven roving If joint is inspected by Customer Inspector, please complete the following: Spec. Actual Inspector Fit Up: Taper (if specified) Signature of Inspector: