Professional Documents
Culture Documents
Installation Guide: Dfmpro For Solidworks
Installation Guide: Dfmpro For Solidworks
Version 4.3
March 2017
Copyright Notice
© HCL Technologies Limited. All rights reserved.
No part of this document (whether in hardcopy or electronic form) may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, to any third party without the written permission of HCL Technologies Limited.
HCL Technologies Limited reserves the right to change the information contained in this document
without prior notice.
The names or trademarks or registered trademarks used in this document are the sole property of the
respective owners and are governed/ protected by the relevant trademark and copyright laws.
This document is provided by HCL Technologies Limited for informational purposes only, without
representation or warranty of any kind, and HCL Technologies Limited shall not be liable for errors or
omissions with respect to the document. The information contained herein is provided on an “AS-IS”
basis and to the maximum extent permitted by applicable law, HCL Technologies Limited hereby
disclaims all other warranties and conditions, either express, implied or statutory, including but not
limited to, any (if any) implied warranties, duties or conditions of merchantability, of fitness for a
particular purpose, of accuracy or completeness of responses, of results, of workmanlike effort, of lack
of viruses, and of lack of negligence, all with regard to the document.
Confidentiality Notice
This document is disclosed only to the recipient pursuant to a confidentiality relationship under which
the recipient has confidentiality obligations defined herein after. This document constitutes
confidential information and contains proprietary information belonging to HCL Technologies Limited,
and the recipient, by its receipt of this document, acknowledges the same. The recipient shall use the
confidential information only for the purpose defined above for which this document is supplied. The
recipient must obtain HCL Technologies Limited’s written consent before the recipient discloses any
information on the contents or subject matter of this document or part thereof to any third party
which may include an individual, firm or company or an employee or employees of such a firm or
company. The recipient acknowledges its obligation to comply with the provisions of this confidentiality
notice.
1
Contents
DFMPro: Introduction ............................................................................................. 3
What is DFMPro for SolidWorks? ..................................................................................................... 3
Troubleshooting ................................................................................................................................ 3
Prerequisites ..................................................................................................................................... 5
2
DFMPro: Introduction
This chapter briefly introduces the various aspects involved in installing and activating the
DFMPro for SolidWorks license.
Prerequisites are packages which must be installed for the smooth functioning of
DFMPro for SolidWorks.
Troubleshooting
If you have any questions or concerns in relation to DFMPro license installation and
activation, please contact us at: dfmpro.support@geometricglobal.com.
3
System Requirements
This chapter details the system requirements (both Hardware and Software) for DFMPro for
SolidWorks. Before installing DFMPro for SolidWorks, you need to ensure the fulfillment to
the following system requirement.
RAM Minimum: 4 GB
Recommended: 8GB
4
Installation Information
This chapter provides the installation details for DFMPro for SolidWorks. The chapter covers
the following-
In case of absence of the database files in the user interface, copy the above mentioned path,
paste it in the windows search box and press Enter.
Prerequisites
Administrator Privileges: You must be logged in as Administrator with full privileges
when setting up or making changes in the DFMPro License Manager utility.
Ensure that SOLIDWORKS (2012, 2013, 2014, 2015, 2016 and 2017) is installed on
the machine.
Any previous version of DFMPro for SolidWorks must be uninstalled before the
installation of DFMPro for SolidWorks 4.3.0.4217.
E-Drawings Viewer
5
Installing DFMPRO
INSTALLING DFMPRO
The executable first searches for the prerequisites on computer. If prerequisites are not
found, it will first install those and then launch the installation for product.
Double click the .exe file to launch the following window. Click Next.
6
Click on I Agree in the End User License Agreement dialogue box.
On agreeing to the End User License Agreement, the following window would
appear in the user interface. This allows user to change the Default DFMPro
installation location (which by default is C:\Program Files\Geometric\DFMPro for
SolidWorks(x64)\) and database location (the default location of which is
C:\ProgramData\GeometricLtd\DFMPro\DFMDataBase\) by way of clicking on the
Change button.
7
The default setting provided can as well be used by users. After making the desired
changes Click Next.
8
Click Finish to complete the installation process.
License Configuration
Generate the request from the license server for a floating license or from the client
machine for node locked license.
DFMPro for SolidWorks would fail to run in the absence of an activated license
9
Start DFMPro License Manager Application from
Start>>Programs>>DFMPro>>DFMProforDFMProForSolidWorks>>DFMProLicenseM
anager.
Click the License Setup tab and then click on the Request License button.
Fill all the required fields in the form which appears in the user interface. Send the
form via Outlook or Save and mail to dfmpro.register@geometricglobal.com.
10
11
Types of DFMPro License
Depending on your requirement of single-user or multiple-user, you can request for a
DFMPro license which can be activated either as standalone (single-user installation) or as a
Floating License (for multiple-user installations).
DFMPro License
Standalone License
A standalone license (node-locked) authorizes the installation and use of DFMPro on a
specific machine. Ideal for small offices and individual use, the standalone license can be
activated in the following manner-
12
To find the availability of modules, click on the Authorized Modules tab.
13
Floating License
Floating License is best suited for large organizations where multitude of users can rely on
limited number of licenses. In this case, a designated server machine allows authorized users
to access the DFMPro license upon their request.
Now click on License Setup tab on DFMPro License Manager. {Client Side}
Check Set Server Host name and Port number for floating license radio button.
14
Provide Server Host name. Provide port number if a specific port has been opened
for communication.
15
About HCL Technologies Limited
HCL Technologies is a leading services company that covers the entire gamut of technology
solutions and services including infrastructure management, application development, BPO
and engineering and R&D services. Over the years, HCL Technologies has demonstrated
remarkable growth in spite of economic downturn and is emerging as one of only eight 21st
century listed technology companies in the world to cross $1bn in net profit, $5bn in revenue
and $15bn in market capitalization. As a $6 billion global company, HCL Technologies brings
IT and engineering services expertise under one roof to solve complex business problems for
its clients. Leveraging extensive global off-shore infrastructure and a network of offices in 31
countries, HCL provides holistic, multi-service delivery in industries such as financial services,
manufacturing, consumer services, public services and healthcare
16