Professional Documents
Culture Documents
11 Scanner Initialization
11 Scanner Initialization
When starting using the scanner, customer should change some SPEC of the
The CCD barcode scanner is STE factory optional parts. Normally, the
initialization had been finished when left factory so the customers can use the
scanner directly without setting it again. In some cases, when you find it not
working please initial the scanner according the following steps. (Connect the
scanner to the scale RS232 port first, plug in the DC power supplier for the
Page No. 71
RM-40 Service Manual
1、Enter Setup
3、Update
4、Enter Setup
5、Postfix Code
6、Hexadecimal Digits=0
7、Hexadecimal Digits=D
8、Hexadecimal Digits=0
9、Hexadecimal Digits=A
10、Validate
11、Update
Page No. 72