Professional Documents
Culture Documents
GSP05/10 Sub-Prime Electric Submersible Pumps: Dimensions (MM)
GSP05/10 Sub-Prime Electric Submersible Pumps: Dimensions (MM)
GSP05/10 Sub-Prime Electric Submersible Pumps: Dimensions (MM)
GSP05
GSP10
GSP05/10 Sub-Prime®
Electric Submersible Pumps
Features Specifications
• Dry running capabilities (Model) GSP05 GSP10
12
10
6
GSP10
4 GSP05
0
0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0
Flow (m3/hr)
Warning: Pumps are not designed for use in explosive atmosphere, flammable environments or for pumping volatile liquids
Tether Pumping
Motor Cover Length Range
Thermal Start Capacitor (mm) (mm)
Overload
Bearing Housing 89 165
Protection
127 191
Stator Casing
Cooling (Cast Aluminium) 178 216
Jacket 229 254
Stator
Ball 279 279
Shaft & Rotor
Bearings 330 318
Seal Housing 381 343
Upper and Lower
Mechanical Seals
Pumping range based on operation in
Diffuser non-turbulent conditions. Actual
Oil Casing
range may vary due to temperature
Rear Cover Outer Lip Seal conditions and cord shape. Tether
Strainer (Steel) Impeller length increases variance of pumping
(Urethane) range.
Suction plate Suction Cover
(Steel)
Specification and illustrations subject to revision without notice. All information is approximate and for general guidance.
Sub-Prime and the colour orange for pumps are registered trademarks of Godwin Pumps of America, Inc. GSP05/10-1 03/06