Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 1

Mr. And mrs.

Lecture good afternoon


on occasion this time I will present my practical work report
the title of my reportl is The construction project of fly over dermoleng
and the first we will the discussion chapter one
kurang lebih = more or less,
sekitar = around , isi ulang = backfield
I divide it into 4 parts
It into divide= dibagi menjadi
Chapter 2 (pile cap)
Read and study construction drawings (location, depth, width and length) of pile cap.
Determine the length and width limits, usually using bets and threads. This is done by using
Theodolite surveyor and waterpass.
Floor casting (LC) is as thick as 10 cm
(curing) curing aims to keep the newly casted concrete in order to remain moist so that the concrete
drying gets into the concrete
(pipa tremi) penggunaan pipa tremi bertujuan agar tidak terjadi segregasi atau pemisahan antara
agregat kasar dengan agregat halus
(bearingpad) is used to transfer the voltage from the upper structure to the lower structure which
can provide movement at the top of the bridge structure. Bearing also serves to accommodate the
movement of Translational and Rotational.
(animasi girder) there is an animation that is close to or similar to the process of girder stressing,
which distinguishes this anamation using a short spand so immediately cast.
(Link slab) The slab link function is as a drag element and press.
(girder grouting) actually in the realization for some girder grouting done above after the erection.
because the safe rules require that the time between the stressing and grouting should be 3 days, so
to speed up the process of grouting done after the erection.
(diaphragm) the function of the girder diaphragm is to withstand the force load acting on the floor
plate, and the load comes from the live and dead load itself as a binder between the girder and
keeps the torsional force due to the bridge floor load.
so many of my presentation more or less I apologize
for the next I invite sir lecture for ask about this my presentation
sorry sir, because my discussion is not so detailed, because what if I want to detail it will spend a lot
of slides
.

You might also like