Professional Documents
Culture Documents
BOP and Component1
BOP and Component1
Blowout Preventer
We offer more than 40 kinds of Blowout Preventers with pressure ranging from 500 psi to 15000 psi and
diameter from 7 -1/16 to 29-1/2 and cable BOP, non-kill BOP diverter, rotating BP and so on.
Furthermore, we can develop and manufacture other kinds of BOP on customers request.
The blowout preventers are designed and manufactured by absorbing the advantages of the world
famous BOP manufactures in structural design. It complies with the technical requirements of well
control in drilling, workover and oil testing.
Annular BOP
Model Bore Working testing Close Open Dimensions (mm) Weight Hydraulic
Size Pressure Pressure volume Volume (kg) Conn.
(inch) (psi) (psi) (l) (l)
A B C D E F
A B C D
FHZ18-21 7 1/16 3000 6000 13.9 11.2 800 926 900 983 1927 NPT 1"
FHZ18-35 7 1/16 5000 10000 13.9 11.2 800 954 900 1011 1943 NPT 1"
FHZ18-70 7 1/16 10000 15000 36 27 1200 1250 1490 6293 NPT 1"
FHZ35-70 13 5/8 10000 15000 116 117 1554 1742 1814 15190 NPT 1"
FHZ54-14 21 1/4 2000 3000 95.3 94.5 1380 1437 1512 7660 NPT 1"
Ram BOP
There are 4 designs. RSC, RSF, RSL and RSH designs.
Model Bore (in) W.P (psi) Weight (kg) Dimension (mm) Connection
L W H Top Bottom
Rotating BOP
Single Ram Manual operated BOP is used for workover services, slim-hole drilling operation. (Double flanged)
Diverter
29" x 500 psi Diverter
Accumulator
All models of control system are equipped with double pump systems. Even if there is no electricity,
the remote control panel can still function normally.
The pump system is equipped with the automatic starting and stopping system. With dual safety
protection desigh, The system will overflow and discharge when the system setting pressure is exceeded.
The energy stored in the accumulators is high enough to complete closing and opening of BOP
several times without the oil pump working.
The accumulator has construction of large upper port, easy to remove and install bladders through the
sopt. Adding accumulator ball valve makes it is convenient to change and maintain accumalotor while the
system is operating.
The driller’s panel is easy to operate. Because of its simple structure, it can be put on any convenient
position on drill floor and opening or closing the BOP at any time.
The protection house makes the remote control panel waterproof and dustproof. It can also prevent
others from mis-operating
Model Efficient Capacity of Oil Motor Power Flowrate of Pump Total capacity of accumulators (single
Tank(L) (kw) (L/min) cap.*No.) (L)
FKQ501 98 3 7 25*2
explosion proof
adjustable output pressure
controllable pressure increasing speed
compact designs
reliable performance
light weight
Products:
Cylindrical gate and seat are made of tungsten carbide. It have the feature of abrasion resistance,
wash resistance and reliable service ability.
The working pressure ranges from 2,000 up to 15,000 psi and flange sizes range from 2 1/16" to 4
1/16" and orifice sizes from 2 to 3 inch.
H2S and CO2 services are available.
Cylindrical gate and seat can be replaced or reversed without removing choke from manifold.
Manual Choke valve is available in working pressure from 10,000 thru 15,000 psi. and flange size from
1 13/16 to 4 1/16", and orifice from 1 to 3 inch.
Cylindrical gate and seat are made of tungsten carbide with abrasion resistance, wash resistance and
reliable services performance.