Professional Documents
Culture Documents
A Project Report For Manufacturing A Chair
A Project Report For Manufacturing A Chair
BY
KAWOOMA EMMANUEL
UBT243/2018/T/C/A/019
AUGUST 2018
1
TABLE OF CONTENTS
Introduction................................................................................................................................................ 1
Terms of reference................................................................................................................................... 2
Bills of quantities...................................................................................................................................... 4
Work plan.................................................................................................................................................... 4
Procedures followed................................................................................................................................5
Out comes.................................................................................................................................................... 5
Lessons learnt............................................................................................................................................ 6
Recommendation...................................................................................................................................... 7
Conclusion................................................................................................................................................... 7
i
Introduction
The purpose of this project was intended me in designing an implement of a chair.
The main objective of this project was to enable me to know how to acquire skills and
knowledge about a chair.
It has improved on my skills and knowledge through working and practicing in workshop
1
Terms of reference
The following are the terms of reference followed
- Making design
- Preparing materials and tools
- Bills of quantity
- Estimated cost of items
- Work plan
- Procedures followed
- Safety precautions
- Out comes
- Lesson learnt
- Challenges and mitigations
- Recommendations
- Conclusion
2
Tools and materials
The following were materials used
- Welding rod
- Pipes
Tools used
- Tape measure
- Hark saw
- File
- Try square
- Welding machine
3
Bills of quantities
The following were the bills of quantities
Work plan
4
Procedures followed
The following were the procedures followed
Out comes
- The design I drown was come out properly
- The colour I wanted was come out properly
- The chair was manufactured properly
- The chair I wanted was came out.
5
Challenges and mitigations
Challenges mitigation
Lack of shades Rooms should be constructed
Limited working space Buy land for expansion
Bad weather conditions Provided good shelter
High transport costs We looked for nearby shop
High costs of materials We looked for nearby shop
Theft We improved on security
Lessons learnt
According to what I did, the following are lessons that I learnt
6
Recommendation
- I recommend to the UBTEB officials to continue with this project because it
introduces us to the field of work
- I recommend to the institute to get for us supervisors during our project report.
- I recommend the Uganda business and technical examination board to go ahead
with this program.
- I recommend the institute to construct shelter were the project are done.
- I recommend to the Uganda business and technical examinations board. To reduce
the money for project work.
Conclusion
- My Conclusion is UBTEB should lower the prices for doing this project work so that
many students can be involved in it.
- My conclusion is UBTEB should continue with this progamme because it has opened
us to the world of work as it is in present situation.