Professional Documents
Culture Documents
FT Aeroterme GEA
FT Aeroterme GEA
Batch / Title
FläktGroup®MultiMAXX HN
400V/3 phases/50Hz 2-speed wide blade
Model size 4
Unit heater for heating with warm water
recirculating-air operating mode
Casing
- robust, sendzimir-galvanized metal-sheet construction
- installed motor / fan assembly with air-intake nozzle and contact protection grille
Model
- heat exchanger casing in RAL 7000
Heat exchanger/coil
- 1 row
- pumped warm/hot water as heating medium
- 3.0 mm fin spacing
- hot-dip galvanized, elliptical steel finned pipe with chambers and pressure-resistant welded
construction
- Wall units require valve control from inlet temperature +130°C (ceiling units from +100°C). This
functions stops medium supply at fan standstill.
- medium connection from the left, viewed from the front side
- heat exchanger connection with a weld-on end
- maximum operating pressure 1 rows - 1.6 MPa, 2 rows - 1.0 MPa
- maximum operating temperature 160°C
- maximum test pressure as of EU Directive 97/23 EG
External rotor motor with axial fan
- 400 V/3 phases/50 Hz 2-speed
- low speed range, wide blade
- type of protection IP 54, moisture proof
- insulation material class F
- motor protection via external thermal contacts
Basic outlet
- outward-curved louvres
- adjustable, self-locking
Electric device
- integrated FläktGroup® MATRIX controls with fan switch (according to DIN EN 60204-1 an all-pole
switch-off must be provided). This isolating switch is to be provided by others on site.
Technical Data
Speed stage 1 2
Ext. press. drop Pa 0
at volume flow m³/h 0
Press. drop accessories Pa 0 0
Fan(s):
Power consumption W 150 240
SFPv kW/(m³/s) 0.14 0.15
Current consumption A 0.30 0.59
Max. current consumption A 0.41 0.72
Voltage/frequency V/Hz 400/50.0
Air heating:
Air
Air volume flow m³/h 3960.00 5590.00
Inlet temp. °C 20.0 20.0
Outlet temp. °C 55.7 51.4
Rel. inlet humidity % 50 50
Rel. outlet humidity % 7 9
Medium type
Heating medium: Water
Inlet temp. °C 110.0
Offer : Q119107988A01
Project: Ford Craiova
FläktGroup®MultiMAXX HN
400V/3 phases/50Hz 2-speed wide blade
Model size 4
Unit heater for heating with warm water
Mixed-air operation with an integrated electronic anti-freeze device
The implementation of the unit must be carried out in accordance with the (EU) Directive
No. 1253/2014
Casing
- robust, sendzimir-galvanized metal-sheet construction
- installed motor / fan assembly with air-intake nozzle and contact protection grille
Model
- heat exchanger casing in RAL 7000
Heat exchanger/coil
- 1 row
- pumped warm/hot water as heating medium
- 3.0 mm fin spacing
- hot-dip galvanized, elliptical steel finned pipe with chambers and pressure-resistant welded
construction
- Wall units require valve control from inlet temperature +130°C (ceiling units from +100°C). This
functions stops medium supply at fan standstill.
- medium connection from the left, viewed from the front side
- heat exchanger connection with a weld-on end
- maximum operating pressure 1 rows - 1.6 MPa, 2 rows - 1.0 MPa
- maximum operating temperature 160°C
- maximum test pressure as of EU Directive 97/23 EG
External rotor motor with axial fan
- 400 V/3 phases/50 Hz 2-speed
- low speed range, wide blade
- type of protection IP 54, moisture proof
- insulation material class F
- motor protection via external thermal contacts
Basic outlet
- outward-curved louvres
- adjustable, self-locking
Electric device
- integrated FläktGroup® MATRIX controls with fan switch (according to DIN EN 60204-1 an all-pole
switch-off must be provided). This isolating switch is to be provided by others on site.
Technical Data
Speed stage 1 2
Ext. press. drop Pa 0
at volume flow m³/h 0
Press. drop accessories Pa 19 41
Fan(s):
Power consumption W 150 240
SFPv kW/(m³/s) 0.22 0.24
Current consumption A 0.30 0.59
Max. current consumption A 0.41 0.72
Voltage/frequency V/Hz 400/50.0
Air heating:
Air
Air volume flow m³/h 2470.00 3600.00
Inlet temp. °C 2.6 2.6
Outlet temp. °C 53.1 47.5
Rel. inlet humidity % 90 90
Rel. outlet humidity % 5 6
mixed air
room air °C 20.0
fresh air °C -15.00
fresh air component % 50.00
Medium type
Heating medium: Water
Inlet temp. °C 110.0
Outlet temp. °C 90.0 90.0
Mass flow rate kg/h 1787 2317
Press. drop h.ex. kPa 4.08 6.67
Water charge l 10.70
Connection size 1 1/4""
Heating capacity kW 41.86 54.26
Throw m 3.10 4.24
Sound level* (A-weighted) for one unit
Sound power dB(A) 59 68
Sound pressure dB(A) 45 54
NR curve NR 42 50
NC curve NC 41 49
*)Measurement conditions:
Distance m 5.0
Room volume m³ 1500
Reverberation time s 2.0
Radiation factor Area center
Dimensions and weight
Width mm 1026
Height mm 904
Depth mm 668
Weight kg 160.1
Manufacturer: FläktGroup
Type: HN41.MWSLOB.ARD
FläktGroup®MultiMAXX HN
400V/3 phases/50Hz 2-speed wide blade
Model size 4
Unit heater for heating with warm water
Mixed-air operation with an integrated electronic anti-freeze device
The implementation of the unit must be carried out in accordance with the (EU) Directive
No. 1253/2014
Casing
- robust, sendzimir-galvanized metal-sheet construction
- installed motor / fan assembly with air-intake nozzle and contact protection grille
Model
- heat exchanger casing in RAL 7000
Heat exchanger/coil
- 1 row
- pumped warm/hot water as heating medium
- 3.0 mm fin spacing
- hot-dip galvanized, elliptical steel finned pipe with chambers and pressure-resistant welded
construction
- Wall units require valve control from inlet temperature +130°C (ceiling units from +100°C). This
functions stops medium supply at fan standstill.
- medium connection from the left, viewed from the front side
- heat exchanger connection with a weld-on end
- maximum operating pressure 1 rows - 1.6 MPa, 2 rows - 1.0 MPa
- maximum operating temperature 160°C
- maximum test pressure as of EU Directive 97/23 EG
External rotor motor with axial fan
- 400 V/3 phases/50 Hz 2-speed
- low speed range, wide blade
- type of protection IP 54, moisture proof
- insulation material class F
- motor protection via external thermal contacts
Basic outlet
- outward-curved louvres
- adjustable, self-locking
Electric device
- integrated FläktGroup® MATRIX controls with fan switch (according to DIN EN 60204-1 an all-pole
switch-off must be provided). This isolating switch is to be provided by others on site.
Technical Data
Speed stage 1 2
Ext. press. drop Pa 0
at volume flow m³/h 0
Press. drop accessories Pa 19 41
Fan(s):
Power consumption W 150 240
SFPv kW/(m³/s) 0.22 0.24
Current consumption A 0.30 0.59
Max. current consumption A 0.41 0.72
Voltage/frequency V/Hz 400/50.0
Air heating:
Air
Air volume flow m³/h 2470.00 3600.00
Inlet temp. °C 2.6 2.6
Outlet temp. °C 53.1 47.5
Rel. inlet humidity % 90 90
Rel. outlet humidity % 5 6
mixed air
room air °C 20.0
fresh air °C -15.00
fresh air component % 50.00
Medium type
Heating medium: Water
Inlet temp. °C 110.0
Outlet temp. °C 90.0 90.0
Mass flow rate kg/h 1787 2317
Press. drop h.ex. kPa 4.08 6.67
Water charge l 10.70
Connection size 1 1/4""
Heating capacity kW 41.86 54.26
Throw m 3.10 4.24
Sound level* (A-weighted) for one unit
Sound power dB(A) 59 68
Sound pressure dB(A) 45 54
NR curve NR 42 50
NC curve NC 41 49
*)Measurement conditions:
Distance m 5.0
Room volume m³ 1500
Reverberation time s 2.0
Radiation factor Area center
Dimensions and weight
Width mm 1026
Height mm 904
Depth mm 668
Weight kg 160.1
Manufacturer: FläktGroup
Type: HN41.MWSLOB.ARD