This liquid penetrant test report summarizes the inspection of an item. It lists 20 items to be documented including a description of the item, thickness, surface covered, drawings/part numbers, heat/GE numbers, material specification, quantity, procedure number, penetrant type and batch numbers, cleaner, penetrant, and developer used, dwelling and development times, lighting equipment and intensity, applicable codes and standards, acceptance criteria for indications, test results, and whether post-cleaning was performed. The acceptance criteria specify that indications greater than 1/16 inch shall be considered relevant and certain indication types and configurations shall cause rejection.
This liquid penetrant test report summarizes the inspection of an item. It lists 20 items to be documented including a description of the item, thickness, surface covered, drawings/part numbers, heat/GE numbers, material specification, quantity, procedure number, penetrant type and batch numbers, cleaner, penetrant, and developer used, dwelling and development times, lighting equipment and intensity, applicable codes and standards, acceptance criteria for indications, test results, and whether post-cleaning was performed. The acceptance criteria specify that indications greater than 1/16 inch shall be considered relevant and certain indication types and configurations shall cause rejection.
This liquid penetrant test report summarizes the inspection of an item. It lists 20 items to be documented including a description of the item, thickness, surface covered, drawings/part numbers, heat/GE numbers, material specification, quantity, procedure number, penetrant type and batch numbers, cleaner, penetrant, and developer used, dwelling and development times, lighting equipment and intensity, applicable codes and standards, acceptance criteria for indications, test results, and whether post-cleaning was performed. The acceptance criteria specify that indications greater than 1/16 inch shall be considered relevant and certain indication types and configurations shall cause rejection.
FORMAT NO: MHPL/INSP/08,REV-00,DTD. 01.09.16 REPORT No: DATE: Sr. No. Description Observation 1 ITEM DESCRIPTION 2 THICKNESS 3 SURFACE COVERED 4 DRAWING No/PART No 5 HEAT No/GE No 6 MATERIAL SPECIFICATION 7 QUANTITY 8 PROCEDURE No: 9 LIQUID PENETRANT TYPE 10 PRODUCT USED MAKE BATCH No 11 CLEANER 12 PENETRANT 13 DEVELOPER 14 DWELLING TIME 15 DEVELOPMENT TIME 16 LIGHTING EQUIPMENT &INTENSITY 17 ASME Code Section-V. PRACTICE STANDARD 18 ASME SEC- VIII, Div-I ACCEPTANCE CRITERIA Indications >1/16"(1.5mm) shall be considered as relevant The following Indications shall be rejectable : 1. Relevant linear indication >1/16"(1.5 mm) 2. Relevant rounded indications >3/16"(5.0 mm) 3. Four or more rounded indications in a line separated by 1/16"(1.5 mm)or less (edge to edge). 19 RESULT 20 POST CLEANING