Professional Documents
Culture Documents
8085 Microprocessor MCQS: August 30, 2017
8085 Microprocessor MCQS: August 30, 2017
electricalvoice.com/8085-microprocessor-mcqs/7
91. The contents of the Program Counter (PC), when the microprocessor is reading from
2FFF H memory location, will be
1. 2FFE H
2. 2FFF H
3. 3000 H
4. 3001 H
Answer
Answer. c
92. If the HLT instruction of an Intel 8085A microprocessor is executed
1. the microprocessor is disconnected from the system bus till the RESET is pressed.
2. the microprocessor halts the execution of the program and returns to the monitor.
3. the microprocessor enters into a HALT state and the buses are tri-stated.
4. the microprocessor reloads the program counter from the locations 0024 H and
0025 H.
Answer
Answer. c
93. The stack pointer of an 8085 A microprocessor contains ABCD H.
PUSH PSW
XTHL
PUSH D
JMP EC75 H
At the end of the execution of the above instructions, what would be the content of the
stack pointer?
1. ABCB H
2. ABCA H
3. ABC9 H
4. ABC8 H
Answer
Answer. c
94. In an Intel 8085 A, what is the content of the Instruction Register (IR)?
1/3
3. Op-code for the instruction to be executed next
4. Operand for the instruction to be executed next
Answer
Answer. a
95. The content of the Program Counter of an intel 8085A microprocessor specifies
which one of the following?
Answer
Answer. c
96. Which one of the following statement does not describe property/characteristic of a
stack pointer register in 8085 microprocessor?
Answer
Answer. c
97. Which one of the following instructions is a 3-byte instruction?
1. MVI A
2. LDAX B
3. JMP 2050 H
4. MOV A,M
Answer
Answer. c
98. In 8085, the DAA instruction is used for
Answer
Answer. c
99. When an 8086 executes an INT type instruction, it?
Answer
Answer. a
100. When an 8086 executes an INT type instruction, it?
Answer
Answer. a
3/3