Professional Documents
Culture Documents
Pspice and Matlab For Electronics: An Integrated Approach: Simulation Settings For Bias Point Calculations
Pspice and Matlab For Electronics: An Integrated Approach: Simulation Settings For Bias Point Calculations
FIGURE 1.7
Simulation settings for bias point calculations.
To simulate the circuit for DC analysis, the sequence of actions shown in Box 1.3
is used to simulate the circuit. Figure 1.7 shows the simulation settings for the bias
calculations. Figure 1.8 shows the voltages at various nodes of Figure 1.6 upon
performing the DC analysis.
1.3.2 DC Sweep
In a DC sweep, one or more of the DC voltages are allowed to change and the
voltages at nodes and currents through devices are monitored. The analysis
type used is DC sweep. The following example illustrates the use of the DC
sweep.