Professional Documents
Culture Documents
Samsung ITFIT, Bluetooth Earphone, Sweat Proof IPX4, Playtime Upto 6 HRS, Light Weight, Blue & Black (BE7) - User-Manual
Samsung ITFIT, Bluetooth Earphone, Sweat Proof IPX4, Playtime Upto 6 HRS, Light Weight, Blue & Black (BE7) - User-Manual
Samsung ITFIT, Bluetooth Earphone, Sweat Proof IPX4, Playtime Upto 6 HRS, Light Weight, Blue & Black (BE7) - User-Manual
FCC WARNING
Instruction for use How to charge This device complies with part 15 of the FCC Rules. Operation is
Function Action LED Indicator 1. Open the charger port cover. subject to the following two conditions: (1) this device may not
Turn the earphone ON Press and hold “O” for about 2 seconds Blue LED flashes for 1 second 2. Connect the headset to USB power adaptor via Micro cause harmful interference, and (2) this device must accept any
Turn the earphone OFF Press and hold “O” for about 4 seconds Red LED flashes for 1 second interference received, including interference that may cause
USB cable. undesired operation.
Bluetooth connection Press and hold “O” for about 5 seconds Blue & Red LED flashes alternately
(First time to pair with mobile device)
3. The LED indicator will glow RED when charging. Any changes or modifications not expressly approved by the party
4. The LED indicator will glow BLUE when the battery is full. responsible for compliance
Bluetooth connection Press and hold “O” for about 2 seconds Blue LED flashes quickly & reconnects could void the user's authority to operate the equipment.
(Reconnected to mobile device after paired) automatically 5. When the battery is low NOTE: This equipment has been tested and found to comply with
Play or pause Music Press and hold “O” for about 1 second Standby mode: Working mode: the limits for a Class B digital device, pursuant to Part 15 of the
Volume up Short pressing “+” The LED indicator will The LED indicator will flash FCC Rules. These limits are designed to provide reasonable
Volume down Short pressing “–” flash RED once every RED every 5 seconds. protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
Skip forward Long pressing “+” second.
frequency energy and, if not installed and used in accordance with
Skip backward Long pressing “–” the instructions, may cause harmful interference to radio
Pick up a call Press “O” communications. However, there is no guarantee that interference
Reject the call Press and hold “O” for about 1 second will not occur in a particular installation.
during the call When an incoming call Blue LED flashes once every 5 If this equipment does cause harmful interference to radio or
seconds television reception,
Terminate the call Press “O”
which can be determined by turning the equipment off and on, the
Switch device during the call* Press and hold “O” for about 1 second
user is encouraged to try to correct the interference by one or more
during the call
of the following measures:
Switch caller in a call Short press “O” -- Reorient or relocate the receiving antenna.
(Terminate current call)*
-- Increase the separation between the equipment and receiver.
Switch caller in a call Press “O” twice -- Connect the equipment into an outlet on a circuit different
(Pause & Hold current call)* from that to which the receiver is connected.
Disposal of Electronic Products
Switch caller in a call Press “O” twice Micro USB cable -- Consult the dealer or an experienced radio/TV technician for
(Switch back the on-hold call)* 1. Do not place the product as household waste;
help.
2. Please dispose of discarded electronic products properly
Keep current caller & Reject a new coming call* Press and hold “O” for about 1 second The device has been evaluated to meet general RF exposure requir
according to local regulations.
* Depending on whether the mobile device supports this feature ement. The device can be used in portable
3. Please participate in electronics recycling program. FCC ID: 2ANBQ-BE7
exposure condition without restriction