Professional Documents
Culture Documents
SINGLE SCREW EMPTY BUNCH PRESS, Sri Sinaco
SINGLE SCREW EMPTY BUNCH PRESS, Sri Sinaco
SINGLE SCREW EMPTY BUNCH PRESS, Sri Sinaco
Generally, oil lost through EFB (i.e. mixture of remnant of oil + water that carried over
by EFB) is unavoidable in milling process. However, this remnant of oil is reclaimable by
squeezing out the liquor mixture from EFB using a Press Machine. From the liquor
mixture, oil could be separated and recovered.
Beside oil recovery, EFB Press Machine serves to remove excessive water that contained
within EFB (moisture reduction) in order to suit it various applications requirement.
Selecting an appropriate pressing machine is of the utmost importance for the optimum
extraction of oil and reduction of moisture from EFB.
Our ENHANCED design of EFB Press Machine has proven to be reliable in achieving
higher moisture reduction and better rate of oil recovery.
Workshop
Lot 1039, Jalan Maharaja Lela, Batu Tiga,
36000 Teluk Intan, Perak Darul Ridzuan, Malaysia. Tel (605)-6237252 Fax (605)-6237251
-2- (07-01-10)
SRI SINACO ENGINEERING WORKS SDN BHD (861084-X)
Sales & Marketing Office
2A (Ground Floor), Tiara Square, Jalan Tiara 3, Taman Perindustrian Sime UEP,
47600 Subang Jaya, Selangor Darul Ehsan, Malaysia. Tel (603)-80235823 Fax (603)-80241823
KEY FEATURES
Workshop
Lot 1039, Jalan Maharaja Lela, Batu Tiga,
36000 Teluk Intan, Perak Darul Ridzuan, Malaysia. Tel (605)-6237252 Fax (605)-6237251
-3- (07-01-10)
SRI SINACO ENGINEERING WORKS SDN BHD (861084-X)
Sales & Marketing Office
2A (Ground Floor), Tiara Square, Jalan Tiara 3, Taman Perindustrian Sime UEP,
47600 Subang Jaya, Selangor Darul Ehsan, Malaysia. Tel (603)-80235823 Fax (603)-80241823
TECHNICAL DATA
A) Press Machine
Made : SINACO
Pressing Capability
Empty Fruit Bunch Before Pressing : average 65% of moisture content on sample
Empty Fruit Bunch After Pressing : 45% ± 5% of moisture content on sample
Unripe/Hard Bunch After Pressing : ≥55% of moisture content on sample
Workshop
Lot 1039, Jalan Maharaja Lela, Batu Tiga,
36000 Teluk Intan, Perak Darul Ridzuan, Malaysia. Tel (605)-6237252 Fax (605)-6237251
-4- (07-01-10)
SRI SINACO ENGINEERING WORKS SDN BHD (861084-X)
Sales & Marketing Office
2A (Ground Floor), Tiara Square, Jalan Tiara 3, Taman Perindustrian Sime UEP,
47600 Subang Jaya, Selangor Darul Ehsan, Malaysia. Tel (603)-80235823 Fax (603)-80241823
D) Bearing
Current Protector
Main Drive Motor : 225 A MCCB 25 KA TP – TERASAKI (Japan) or
equivalent
Starter/Contactor
Main Drive Motor : 90 kW Star-Delta – FUJI (Japan)
Workshop
Lot 1039, Jalan Maharaja Lela, Batu Tiga,
36000 Teluk Intan, Perak Darul Ridzuan, Malaysia. Tel (605)-6237252 Fax (605)-6237251
-5- (07-01-10)
SRI SINACO ENGINEERING WORKS SDN BHD (861084-X)
Sales & Marketing Office
2A (Ground Floor), Tiara Square, Jalan Tiara 3, Taman Perindustrian Sime UEP,
47600 Subang Jaya, Selangor Darul Ehsan, Malaysia. Tel (603)-80235823 Fax (603)-80241823
F) Integral Components
Worm Screw Shaft : cast steel coated with stainless steel (SS 304)
Press Cone : cast steel coated with stainless steel (SS 304) at inner
surface of cone outlet
– one (1) unit
Workshop
Lot 1039, Jalan Maharaja Lela, Batu Tiga,
36000 Teluk Intan, Perak Darul Ridzuan, Malaysia. Tel (605)-6237252 Fax (605)-6237251
-6- (07-01-10)
SRI SINACO ENGINEERING WORKS SDN BHD (861084-X)
Sales & Marketing Office
2A (Ground Floor), Tiara Square, Jalan Tiara 3, Taman Perindustrian Sime UEP,
47600 Subang Jaya, Selangor Darul Ehsan, Malaysia. Tel (603)-80235823 Fax (603)-80241823
G) Construction of Machine
Overall Dimension (mm) : approx. 4880 (L) x 1630 (W) x 2540 (H)
Workshop
Lot 1039, Jalan Maharaja Lela, Batu Tiga,
36000 Teluk Intan, Perak Darul Ridzuan, Malaysia. Tel (605)-6237252 Fax (605)-6237251
-7- (07-01-10)
Sri Sinaco Engineering Works Sdn Bhd SINGLE SCREW EMPTY FRUIT BUNCH PRESS
Date: 18-02-08 MODEL SBP 125-13/2
DIMENSIONAL DRAWING
570 520
100
1235
2540
600