Professional Documents
Culture Documents
DBAE983507 - REND - Process Design Parameters
DBAE983507 - REND - Process Design Parameters
Classification: Internal
Title: Piping system design basis DocID: DBAE983507
Revision: -.19
Author: Anders Björklund Sheets: 1
See Wärtsilä Process design parameters (WDAAA105212) and system handbooks for latest info
Temperature [°C]
Ambient design conditions
minimum maximum
Outside PowerHouse 15 40
Inside PowerHouse
≥ 0°C Engine hall piping PN16 Carbon steel P235TR1 EN10217-1 EN13480 16.8 bar /S(Q)
LUBE OIL SYSTEM 8 bar 95°C
≥ -10°C Module piping PN16 Carbon steel P235GHTC1 EN10216-2 EN13480 11.4 bar /M(Q)
≥ 0°C Engine hall piping PN16 Carbon steel P235TR1 EN10217-1 EN13480 13.0 bar /S(V)
COOLING SYSTEM (External) 6 bar 110°C
≥ -10°C Module piping PN16 Carbon steel P235GHTC1 EN10216-2 EN13480 8.6 bar /M(V)
WATER SUPPLY SYSTEM 10 bar amb (40°C) ≥ -10°C Engine hall piping/module PN16 Stainless steel 1.4307 EN10217-7 EN13480 14.7 bar /S(F)
INTAKE AIR SYSTEM 0 / 0.5 bar amb (75°C) ≥ -10°C Engine hall piping/module PN2.5 Carbon steel S235JR EN10025-2 EN13480 No /S(NG)
NOTES!
a) Material certificates: For PED class 1 or higher material certificate according to EN10204 3.1 or 3.2. (in case of 3.1, the manufacturer has to have a quality system certified according to EN 764-5 paragraph 4). For class SEP (article 3.3) test report 2.2 according to EN10204: 2004
DocID: DBAD535614 -.19 Document Classification: Sheet name: Process design parameters (EN)
Status: Draft Internal Page: 1/1