Professional Documents
Culture Documents
EN10025 - Steel Grades Specifications
EN10025 - Steel Grades Specifications
EN10025 - Steel Grades Specifications
Comparison between grades in EN 10025: part 2: 2004 and nearest equivalent versions in EN 10025 : 1993
and BS 4360 : 1990
EN 10025 : part 2 : 2004 EN 10025 : 1993 BS 4360 : 1990
Yield (Reh) Charpy V-notch
Tensile (Rm)
min longitudinal
Grade Grade Grade
Energy (J)
Strenght at t=16mm (Mpa) Temp (°C)
t=16mm
S185 185 290/510 – – S185 –
1
– – – S235 40A
2
S235JR 20 27 S235JRG1/G2 40B
235 340/470
S235J0 0 27 S235J0 40C
S235J2 -20 27 S235J2G3/G4 40D
1
– – – S275 43A
2
S275JR 20 27 S275JR 43B
275 410/560
S275J0 0 27 S275J0 43C
S275J2 -20 27 S275J2G3/G4 43D
1
– – – S355 50A
2
S355JR 20 27 S355JR 50B
S355J0 355 490/630 0 27 S355J0 50C
S355J2 -20 27 S355J2G3/G4 50D
S355K2 -20 40 S355K2G3/G4 50DD
E295 295 470/610 – – E295 –
S335 335 570/710 – – S335 –
E360 380 650/830 – – E360 –
1 MPa = 1N/mm2
Note
For all products to be compliant with the EU Construction Products Directive (CPD 89/106/EC) the material
must offer a guaranteed minimum impact performance. This has resulted in the removal of this grade from
the standard, and the lowest grade now offered is the JR version for each yield strength variation.
The European Committee for Iron and Steel Standardisation is responsible for producing the European
Standards (ENs) for structural steels. The first of these standards, EN 10025, was published in the UK by
BSI as EN10025: 1990, partly superceeding BS 4360: 1986, which was re-issued as BS 4360: 1990. In
1993, a second edition of EN 10025 was made available together with EN10113: parts 1,2 & 3 and EN
10155. In June 1994, EN 10210: part 1 was published and at the same time BS4360 was officially
withdrawn. The balance of the BS 4360 steels not affected by these ENs were re-issued in new British
Standards BS 7613 and BS 7668. In 1996, with the publication of EN 10137, BS 7613 was withdrawn. BS
7668 will remain until an EN for atmospheric corrosion resistant hollow sections is available.
In 2004 the stand EN 10025 was revised to address the provisions of EU Construction Products Directive
(89/106/EEC). It is now published in six parts to bring together almost all the ‘Structural Mettallic Products’
into one comprehensive standard.
S275 – a high strength and high yield structural steel used extensively throughout the construction industry.
Masteel UK Limited supplies a wide range of S275 grade steels under the EN 10025 specification including
S275JR and S275AR. We also supply a wide range of steel fabricated sections – including beams and
columns – click here for more information.
Our steels, of Western European origin, are produced to the highest quality and are a perfect material for
your civil engineering projects.
S275JR
A structural grade (S) with at minimum yield strength of 275 N/mm²m, the JR designation confirms that the
steel has undergone longitudinal Chary V-Notch impact testing at 27J (Joules) at room temperature. Other
Charpy designations include JO, J2 and K2.
S275AR
A structural grade (S) with the same minimum yield strength of 235 N/mm²m, but supplied in an ‘as rolled
condition’.
S275 structural steel plate is a versatile material which can be used in a wide range of construction and
engineering applications.
S275JR Structural steel plate normally rolled under AS rolled. For the heavy thickness steel plate S275JR or want a
high steel property, Xin steel suggest adopt normalised heat treatment when rolling. For doing normalized steel
plate S275JR,when delivery the steel stamped would be printed as S275JR N. Else, the steel stamped shall also
contain specifications (Thickness*Width*Length),Mill’s Logo, Heat number or Batch number according to the original
mill test certificates. Customers should choose whether doing Normalized according to the end usage of steel plate
S275JR.
This are common mild steel/carbon steel plate for structural, manufacturing plant, machinery, mining
equipment and Treatment of androgenic alopecia with Propecia vehicles, excavators, loader, bulldozers,
crane, mining hydraulic supports, construction, power plant, sugar mill, palm oil mill, oil and gas, port
equipments, fans, drilling rigs, power shovel and other structural parts. Heat analysis shall be used to
determine the required chemical composition for carbon. Manganese, phosphorus, sulfur, silicon, and
copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test.
#S275JR and its related series (S275J0, S275J2, S235JR, S235J0, S235J2) are very versatile common mild
steel/carbon steel plate for multiple structural applications e.g. manufacturing plant, machinery, mining
equipment and vehicles, excavators, loader, bulldozers, crane, mining hydraulic supports, construction,
power plant, sugar mill, palm oil mill, oil and gas, port equipments, fans, drilling rigs, power shovel and
other structural parts. Heat analysis shall be used to determine the required chemical composition for carbon.
Manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be
evaluated using tension test.
275 indication of cuanto cuesta un lubricante en la farmacia the min specified yield strength for thickness of
under16mm.
Temperature -20 0 20
Notch impact test. Min.
27 27 27
absorbed energy
Origin : Malaysia, Indonesia, Korea, Japan, Turkey, Eastern European, China and India
S275JR, S275J0 and S275J2 EN10025-2 standard min thickness 5mm up to max thickness 390mm.
We can exclusively produce steel plate thickness 5mm X width 2000mm X your choice of length.