Professional Documents
Culture Documents
BASF MasterGlenium 3889 - Superplasticizer
BASF MasterGlenium 3889 - Superplasticizer
Polycarboxylic ether based superplasticizer for the production of high quality ready-mix concrete
with exceptional workability retention.
DESCRIPTION PACKAGING
MasterGlenium 3889 is an innovative latest MasterGlenium 3889 is supplied in 210 litre
generation superplasticizer based on drums, 1,000 litre containers or in bulk.
polycarboxylic ether (PCE) polymers, and is
specially engineered for ready-mix concrete TYPICAL PROPERTIES*
were the consistency of aggregates may be
variable. Appearance Whitish to light brown
clear to cloudy liquid
MasterGlenium 3889 is differentiated from Specific gravity @ 25°C 1.073
conventional superplasticisers, such as those pH value 5.0 – 7.0
based on sulphonated naphthalene Chloride content “chloride-free” to EN
formaldehyde condensate in that it is based on a 934-2
unique carboxylic ether polymer with long lateral
chains. This greatly improves cement dispersion.
At the start of the mixing process the same STANDARDS
electrostatic dispersion occurs but the presence ASTM C-494 Type F&G
of the lateral chains, linked to the polymer BS EN 934-2
backbone, generate a steric hindrance which
stabilises the cement particles capacity to DOSAGE
separate and disperse. The normally recommended dosage rate of
This mechanism provides flowable concrete with MasterGlenium 3889 is 0.60 to 2.00 litre per
greatly reduced water demand. 100kg of total cementitious material.
SAFETY PRECAUTIONS
MasterGlenium 3889 contains no hazardous
substances requiring labelling. For further
information refer to the Material Safety Data
Sheet.
BASF_CC-UAE/Gl_3889_01_15/v1/
The technical information and application advice given in this BASF publication are based on the present state of
STATEMENT OF our best scientific and practical knowledge. As the information herein is of a general nature, no assumption can be
RESPONSIBILITY made as to a product's suitability for a particular use or application and no warranty as to its accuracy, reliability or
completeness either expressed or implied is given other than those required by law. The user is responsible for
checking the suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by
NOTE BASF either orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since
they, and not BASF, are responsible for carrying out procedures appropriate to a specific application.