Professional Documents
Culture Documents
Dynacord PDF
Dynacord PDF
English
Contents
INTRODUCTION PRODUCTS
Contents 02 - 03 D-Lite Series 12 - 45
History 04 - 05 VariLine 46 - 61
Milestones 06 - 07 CXM 15 62 - 64
Manufacturing 08 - 09 AM 12 65
Bosch Production System 10 - 11 PowerMax 5 66 - 69
Xa 2 System 70 - 77
Cobra System 78 - 95
Alpha System 96 - 99
In 1945 Werner Pinternagel, in the meantime had moved to and often visionary products have
who was an engineer, founded a Landau and by then boasted a been presented ever since at all
workshop for the repair of radio staff of four employees, still bore important international trade fairs
devices in the Lower Bavarian the brand name ‘Dynaphon’. and marketed successfully throughout
town of Pilsting. The development the world. To make it possible to
and manufacture of audio amplifiers, From 1948 onwards, mixing and satisfy the enormous demand,
which he began at the same time, portable amplifiers bearing the DYNACORD moved to Straubing in
became a particular passion. name DYNACORD were being 1958. The workforce, which at that
sold to an ever expanding circle time numbered 80 employees, con-
These pioneering experiences of customers. Within a few years, tinued to expand rapidly. Several
formed the foundation for over the rapidly growing company had times, the production facility was
60 years of expertise in professional become one of the leading enter- renovated or expanded.
power amplifier technology — prises in the still young audio
expertise upon which the brand technology industry. Already in Finally, in 1986 a new plant was
DYNACORD is able to draw today. 1954, the manual workshop have opened in which more than 500
Early results included the KI cinema given way to industrial production employees now develop, produce
amplifier with its output of 25 watts. as the product portfolio continued to and dispatch the company’s pro-
The devices of the company, which expand. The high-caliber, pioneering ducts to all corners of the globe.
Milestones
THE CONSTANTLY EXPANDING PRODUCT
RANGE YIELDED MANY PRO AUDIO MILESTONES.
PowerH
Bosch Production
System
QUALITY WITH SYSTEM
Measurement Hall
PART OF THE NEW INVESTMENT INVOLVED THE CONSTRUCTION AND
COMMISSIONING OF WHAT AT 600 SQUARE METRES IS ONE OF THE
WORLD’S LARGEST AUDIO MEASUREMENT HALLS.
Manufacturing
Since September 2006, DYNACORD has belonged
to the BOSCH concern’s Security Technology
department.
10
11
12
D-Lite Series
· D8
· D 8A
· D 11A
· D 12 / D 12W
· D 12T / D 12TW
· D 12R / D 12RW
· D 12-3
· D 15-3
· Sub 112
· Sub 115
· Sub 118
· PowerSub 112
· PowerSub 212
· PowerSub 312
· PowerSub 315
· D-Lite 1000 System
· D-Lite 2000 System
· D-Lite activeone
· D-Lite activetwo
· D-Lite activefour
13
D-Lite Series
LOUDSPEAKER SYSTEMS
D8 D 8W D 8A
D 11A D 12 D 12W
14
The full-range speakers of the D-Lite of the constant directivity HF horns into accessories facilitate the transport and
series are extremely light, mechanically the baffle is CAD-optimized. The robust setting up of the enclosures as well as
durable polypropylene cabinets for powder-coated steel grilles at the front allowing them to be ideally positioned
professional portable and fixed of the enclosures are backed by black and aimed. Very powerful amplifiers can
installation sound reinforcement acoustic foam plastic. Both the Speakon be used to achieve the widest possible
applications in small to medium-sized sockets in the connection panels are dynamic range, as the loudspeakers of
venues. recessed to allow the cabinets to be operated the D-Lite series offer very high pow-
in cramped locations. er handling and are for the most part
The wide range of mounting accessories afforded additional reliable protection by
available for the enclosures and their The beveled sides of the enclosures allow the fully electronic Voice Coil Tracking
tasteful styling permit them to be used them to be used without problems in Protection system, as well as halogen
without problems in critical fixed in- monitor applications in which more bass protectors against thermal overload. The
stallation applications. Being of poly- extension is required than that provided internal passive crossovers are optimized
propylene, the enclosures are capable by typical monitor loudspeakers. Robust for long throws and even dispersion, allowing
of withstanding the roughest handling handles, integrated stand adapters, and D-Lite cabinets to be used under acoustically
during transport and use. The integration a wide range of flying and mounting unfavorable conditions.
15
D-Lite Series
LOUDSPEAKER SYSTEMS
16
POWERSUB 315
Suitable active and passive subwoofers The passive varieties can, as a result of
implemented as vented direct-radiating their integrated low-pass filters, simply
enclosures permit flexible system be operated parallel to the various passive
configurations. full-range boxes.
The reflex systems of these subs, when The active single-channel subs possess
compared with conventional bass reflex crossover outputs for the creation of
ports, are characterized by less flow loss active three-way systems with e.g. the
and less wind noise. High sound pressure models D 8A or D 11A. The three-channel
levels at very low frequencies are generated subs already possess the requisite power
with considerably less distortion than is amplifiers for passive tops and permit in
the case with conventional bass-reflex the simplest manner the configuration of
ports. so-called ‘satellite systems’.
17
D 8 and D 8W
FULLRANGE CABINET
18
It is remarkable in its class for and midrange is the responsibility passive satellite systems
syste of superior
the very high sound pressure of the DND8200-8 low-distortion quality. The crossover
crossove is optimized
levels it is capable of achieving as neodymium woofer. The integration to achieve a long thr
throw and a very
well as its outstanding audio into the baffle of the symmetrically even sound pattern, permitting the
performance. radiating Constant Directivity high use of the D 8 even iin unfavorable
frequency horn, with its nominal acoustic environment
environments.
The wide range of mounting accesso- radiation angle of 90° x 90° (hori-
ries available for the enclosure and zontal x vertical) and Electro-Voice The loudspeaker components
com are
its tastefully understated styling DH3 driver, is CAD-optimized. guarded by thermo-sw
thermo-switches and
permit its convenient use even in halogen protectors against
ag thermal
critical applications in the fixed With power handling of 250 W (rated) overload. The front is clad in black
installation sector. and 1,000 W (peak), a maximum acoustic foam with a robust, powder-
SPL of 124 dB and a frequency range coated steel grille. The Speakon
The housing is made from ABS of 65 Hz - 20 kHz, the D 8 performs sockets on the connection panel are
and capable of withstanding the outstanding service not only as a recessed. The enclosure is trapezoidal
roughest handling during trans- full-range cabinet but also as the in shape, making it suitable also for
portation and use. The D 8‘s bass mid / high component of active and monitoring applications.
19
20
D 8A
POWERED FULLRANGE CABIN
CABINET
NET
21
22
D 11A
A
POWERED
D FULLRANGE CABINET
T
The D 11A is a conveniently controllable Stereo-Aux channel remains free from distortion and
equipped powered 12“ / 1“ full- with RCA / cinch sockets permits discoloration even at the edges of
range box offering integrated e.g. the direct connection of CD its bandwidth.
Class D power amplifiers, an or MP3 players.
electronic crossover and louds- When combined with powered
peaker equalization. In addition, an XLR microphone subwoofers, ultra-compact active
input with a separate level control three-way high powered systems
For the low and high frequency is available. By means of the XLR can be created very simply for a
ranges 2 x 200 W / RMS are available. Master Out socket, the mix of Line, multitude of applications in both
The maximum overall amplifier AUX and Mic inputs can be looped the live music and fixed installation
output comes to 800 W IHF-A. through to additional powered sectors.
The Line input is implemented as cabinets. For operation with powered
an XLR / jack combo socket. Via subwoofers, a switchable low-cut The extensive range of optional
the Line Thru XLR socket, the signal filter is provided. The D 11A is accessories allows virtually unlimited
can be looped directly through to notable for its high sound pres- use in fixed installations or flown
additional powered cabinets. The sure level and a sonic image that configurations.
23
D 12 · D 12W · D 12T
2T · D 12TW · D 12R · D 12RW
12R
FULLRANGE CABINETS
Weighing a mere 16 kg, the D 12 two-way the entire frequency range. Its elegant
full-range cabinet with its polypropylene en- styling and tasteful black or white
closure has an extremely linear frequency finishes make it suitable for a very wide
response and is notable for its powerful, range of small to medium-sized events as
natural reproduction of the voice as well well as critical applications in the fixed
as its transparent resolution throughout installation sector.
24
The 12“ DL 12 BFH high-power sound levels can be generated, and its ultra-low-distortion toroidal core
transducer covers the bass and profes-sional power amplifiers can transformer, the D 12T is designed
midrange up to 1.5 kHz, whilst in be used the rated outputs of which for 100 V audio networks, whilst the
the high-frequency range, an ND-2 are the same as the peak values of D 12R is a low-impedance, weather-
neodymium driver is coupled with the enclosures they are driving with- resistant installation version with an
a large-format constant Q horn out the reliability of either being integrated PG cable.
with an 80° x 40° coverage compromised.
pattern, the integration of which Like the D 12, the D 12T and D 12R
into the baffle is CAD-optimized. Whether used solo as a full-range are available in both black and
box or in combination with passive white. The extensive range of
As with all the D-Lite cabinets subwoofers, power amplifiers from optional accessories allows their
protections by halogen bulbs, the SL or LX series are recommen- virtually unlimited use in fixed instal-
alow for high, distortion-free peak ded, as is the PowerMate. With lations or flown configurations.
25
D 12-3
FULLRANGE CABINET
DYNACORD‘s traditional and with its high power handling, sures precisely at the areas to be
popular 12“ / three-way concept transduces the frequency range covered. Whether the D 12-3 is
experiences a further dramatic below 700 Hz. used as a full-range box or in com-
improvement in performance with bination with passive subwoofers
the introduction of the D 12-3. The midrange is handled by an with integrated hi-cut filters, such
extremely low-distortion DYNACORD as the Sub 115 or Sub 118, the
With its voluminous bass re- DND 6120 neodymium MF driver, PowerMate 1000 / 1600 or power
production and its uncolored, whilst a DH-3 coupled with a 90° x 50° amplifiers from the SL or LX series
extremely low-distortion vocal constant-directivity HF horn delivers are the ideal partners. The Voice
reproduction, combined with its transparent reproduction of all Coil Tracking Protection system
transparent resolution throughout frequencies above 4 kHz. combines with halogen protectors
the entire frequency range, this to provide the loudspeakers with
lightweight full-range satellite Thanks to the extremely broad reliable protection against thermal
stands head and shoulders above (> 120°) conical dispersion overload.
the multitude of other enclosures pattern in the midrange, even in The extensive range of optional acces-
on the market made from synthetic acoustically unfavorable venues sories allows virtually unlimited use
materials. The tried-and-tested it is generally unnecessary to go of the cabinet in fixed installations or
DL 12 BFH low frequency driver, to great lengths to aim the enclo- flown configurations.
26
Uncolored, extremely
low-distortion vocal reproduction
27
D 15-3
FULLRANGE CABINET
15-3 designs are among the For the midrange, an extremely against thermal overload. The exten-
classics of pro audio history. low-distortion DYNACORD DND sive range of optional accessories
6120 neodymium loudspeaker is allows virtually unlimited use of
With just such a design to which used, which with its conical 120° the cabinet in fixed installations or
an ultra-modern twist has been dispersion guarantees uncolored flown configurations.
added, the D 15-3 sets new standards reproduction of vocals and free-
in the area of professional polypro- dom from alignment problems. The In addition to delivering excellent
pylene enclosures, reconciling the integration into the baffle of the results in its role as a pure, full-
highest possible sound pressure constant directivity high-frequency range box, the D 15-3 can also be
levels, maximum power handling horn, which has a nominal dispersion connected directly to a passive
and linear frequency response angle of 90° x 50°, is CAD-opti- subwoofer with an integrated
with modest dimensions and mized, whilst the DH-3 HF driver hi-cut filter, such as the Sub 118,
extreme lightness. Equipped with a provides transparent reproduction and run in parallel, in which case
DYNACORD DND 15400 neodymium of the high frequencies. no additional amplifier is required.
loudspeaker capable of high power The ideal drivers for full-range or
handling, the D 15-3 convinces The Voice Coil Tracking Protection full-range / sub combinations are
with its powerful and natural voice system combines with halogen the professional power amplifiers
reproduction and impressive sub protectors to provide the loud- of the DYNACORD SL and LX se-
bass. speakers with reliable protection ries or the PowerMate.
28
29
30
Sub 112
SUBWOOFER
The DYNACORD Sub 112 is a of 6 dB / octave. The Sub 112 and against the depredations of
vented, direct-radiating cabinet can therefore be used directly in inclement weather. The connection
equipped with a high-power parallel to appropriate full-range panel offers two 4-pin Speakon
DYNACORD DND12S400 neodymium cabinets, e.g. the DYNACORD D 8, sockets (INPUT / THRU) for a more
woofer boasting power handling if extended bass reproduction is secure connection and the easy daisy-
of 400 W (rated) and 1600 W required. chaining of cabinets. A threaded
(peak). pole adapter is recessed in the top
The Sub 112 cabinet is composed of the Sub 112 cabinet for the swift
The conical vent system results in of birch plywood 15 mm-thick. and safe pole-mounting of suitable
less flow loss and lower air noise All corner joints and braces are full-range cabinets. The cabinet is
than conventional vented designs. grooved and glued. The cabinet‘s equipped with four large rubber feet
High sound pressure levels are surface is painted with a robust, for greater stability. Two handles on
also generated at low frequencies dual component lacquer finish. the side make it possible to carry
with significantly less distortion The acoustic foam and powder the device easily and safely.
than by conventional bass reflex coated steel grille at the front
vents. The Sub 112 contains a protect the DND12S400 woofer A hard-wearing protective cover is
passive low-pass filter with a slope from harm during transportation available as an optional accessory.
31
32
Like almost all the loudspeakers without any thermal overloading of D 12-3 or D 15-3, the Sub 115 and
of the D-Lite series, the 15“ / 18“ the voice coils. Instead of a disruptive Sub 118 are equipped with hi-cut
subwoofers, too, are reliably shutdown like those produced by filters to allow their simple and un-
protected against thermal overload conventional safety circuits, VCTP problematic connection in parallel
by the fully electronic Voice Coil implements a gentler reining-in with the tops.
Tracking Protection system and of the power to safe limits („soft The Sub 115 has the same styling
halogen protectors respectively. switching“) whenever any overloading and footprint as the active 3-channel
occurs. PowerSub 315 and is therefore
Extremely powerful amplifiers can the ideal choice to give powerful
therefore be used to achieve the For universal use in combination emphasis to the bass in active
widest possible dynamic range, with full-range tops such as the D 12, systems.
33
34
PowerSub 112
POWERED SUBWOOFER
The PowerSub 112 is the ideal tight and voluminous sound, quite
bass extension for powered unlike that of the band-pass solutions
full-range cabinets such as the widely encountered in this product
D 8A. class. The Class D power amplifier
module delivers 200 W RMS / 400 W
It is very light and despite its ext- IHF-A and is equipped with an inte-
remely compact dimensions provides grated crossover with a Mid / High
a very powerful and deep bass output. The polarity can be reversed
foundation. The vented design gives should other system components
the PowerSub 112 a very musical, require it.
35
PowerSub 212
POWERED SUBWOOFER
36
PowerSub 312
POWERED SUBWOOFER
The PowerSub 312 powered ding the toughest challenges during operate flawlessly. The use of
12“ subwoofer, which is equipped transportation as well as in use. „Class D Digital Technology“ ensures
with an integrated three-channel The integrated lightweight 800 W + that there is considerably less power
Class D power amplifier with a 2 x 250 W digital power amplifier is dissipation than in normal Class AB
total output of 1300 W / RMS, perfectly attuned in every respect designs. The thermal load on the
was specially conceived to permit to the integrated DYNACORD DND components is therefore markedly
the swift and simple creation of a 12S400 woofer to maximize the dy- reduced.
subwoofer satellite system. namic range and audio quality and
ensure that the woofer is invariably The enclosure is coated with 2K
As satellites, two passive loudspeaker driven within its optimum working lacquer, which is extremely scratch-
systems such as the DYNACORD range. resistant and proof against rough
D 8 are needed. You only need to handling during transportation.
connect them to the Speakon out- To provide further assurance that A robust, powder-coated steel
puts provided for the purpose. The these operating limits are respected, grille protects the woofer against
„X-Over“ switch offers a choice of the performance is supervised by mechanical damage. All the control
three discrete frequencies for the additional protective circuitry such elements are recessed to provide
crossover between the subwoofer as voice coil protection, DC / HF pro- optimal protection of the Power-
and the satellites: 70 Hz, 100 Hz tection, audio limiters, back EMF Sub 312’s most sensitive parts even
and 140 Hz, whilst the „Sub Level“ protection and thermal protection. during transportation. For greater
control allows you to adjust the output Together these ensure that even carrying comfort, the enclosure is
of the PowerSub 312 in the range when the most extreme demands furnished with two sturdy handles,
from -8 dB to +10 dB. The PowerSub are placed upon the system under whilst an integrated threaded pole
312 is made from multiplex birch the most unfavorable conditions, adaptor allows you to make optimal
plywood and capable of withstan- the PowerSub 312 continues to use of precious space on stage.
37
38
PowerSub 315
POWERED SUBWOOFER
The PowerSub 315 is an integrated 15“ DYNACORD LFS are switched over from 1 x 1000 W /
powered vented subwoofer 1008 subwoofer with a total of 8 Ω to 2 x 500 W / 4 Ω. In a fully-
featuring the novel High-Speed 1,000 W (RMS) / 8 Ω and 2 x 500 W expanded system, the PowerSub
Laminar Vent design. (RMS) / 4 Ω are made available to the 315 can drive a total of four 8 Ω
connected satellites. satellites and an additional two
Weighing a mere 45 kg, the light- passive 8 Ω subwoofers without
weight enclosure accommodates The subwoofer level is continuously any difficulty.
all the electronics and audio proces- adjustable and you can select bet-
sors in addition to the switchable ween three different sub / satellite Packed in an extremely robust but
stereo crossover (80 Hz / 100 Hz / crossover frequencies ranging compact multiply birch multiplex
160 Hz) and four Class D power from 80 Hz to 160 Hz. To provide enclosure with castors included
amplifier blocks delivering a combined particularly powerful reinforcement in the delivery, the PowerSub 315
output of 2000 W. of the low frequency range, two offers easy transport and safe
passive (e.g. DYNACORD Sub 115) handling. An M20 threaded adapter
This is the ideal centerpiece for a subwoofers can be driven by the for a mounting pole is integrated
high-powered satellite system. PowerSub 315. In this mode, the into the bowl handle on top of the
Two bridged blocks provide the integrated sub power amplifiers subwoofer.
39
D-Lite 1000
SYSTEM
System components:
• 2xD8
• 1 x PowerSub 312
40
D-Lite
te 2000
SYSTEM
M
System components:
• 2 x D 12
• 1 x PowerSub 315
The D-Lite 2000 system has D-Lite 2000 to the pinnacle of excel- the mighty PowerSub 315. The
been specially designed to meet lence among professional satellite D-Lite 2000 system is also the ideal
the various needs of solo enter- systems. The basic D-Lite 2000 solution for fixed installation in a
tainers, mobile DJs and small system, comprising a PowerSub 315 wide variety of catering establish-
bands. and two D 12 full-range satellites, is ments such as restaurants, cafes,
designed to be easily expandable, so bars and pubs as well as in schools.
Easy handling — thanks to the ultra- you can’t go wrong when it’s time A comprehensive assortment of
compact and lightweight construction to buy in more power. Up to four installation hardware is available for
of the enclosures — and powerful, satellites (two per side) and two positioning the satellites, including
transparent sound with loads of additional passive subwoofers can mounting yokes, wall brackets and
headroom combine to raise the be driven efficiently and easily by truss rigging gear.
41
42
D-Lite activeone
ACTIVE THREE-WAY SYSTEM
System components:
• 2 x D 8A
• 1 x PowerSub 212
D-Lite activetwo
ACTIVE THREE-WAY SYSTEM
System components:
• 2 x D 8A
• 2 x PowerSub 112
D-Lite activefour
ACTIVE THREE-WAY SYSTEM
System components:
• 2 x D 11A
• 2 x PowerSub 212
43
Accessories
D-Lite SERIES
44
ACCESSORIES
Sub Sub 112 Sub 115 Sub 118 PowerSub 112 PowerSub 212 PowerSub 312 PowerSub 315
Dust Cover SH... SH-SUB 112 SH-315 SH-118 SH-SUB 112 SH-PS 212 SH-SUB 112 SH-315
F01U119033 F01U118995 F01U119007 F01U119033 tba. F01U119033 F01U118995
PCL 880 F01U100601
Pole Mount fix 880mm
VPM 1500 F01U141047
Pole Mount adjustable
45
46
VariLine
· VL 62 / VL 62W
· VL 262 / VL 262W
· VL 122
· VL 152
· VL 212
· SUB 18
· SUB 28
47
VariLine
MULTIFUNCTIONAL SPEAKER LINE
VL 62 VL 62W VL 262
48
VL 212
12 SUB 18 SUB 28
Professional sound reinforcement been designed and optimized without loudspeaker protective circuitry and
requires maximum performance and compromise for multifunctional applications. passive true-phase crossovers that ensure
high sound pressure levels for a wide Innovative protective circuits guarantee linear reproduction even in critical acoustic
variety of touring and installation appli- maximum reliability and optimal safety environments.
cations. for all loudspeaker components.
Comprehensive mounting and rigging ac-
Universal loudspeaker functionality is Engineered and made in Germany, VariLine cessories facilitate professional handling
therefore especially important, making loudspeakers employ only the finest and simple, secure installation of VariLine
it possible to react without difficulty to components, including lightweight high- loudspeakers. Stylish and yet visually
changing demands. Both acoustically and power neodymium transducers, rotatable unobtrusive, these enclosures harmonize
mechanically, VariLine enclosures have CAD-optimized CD horns, fully-electronic with the most elegant interiors.
49
Components
VariLine
Throughout the VariLine series, The large-format VariLine VariLine enclosures are made
only selected components of the constant directivity HF horns have from extremely rugged, multiply
highest quality are used. been optimized using advanced birch with a dual-component
CAD software and can be rotated finish sufficiently resilient to
These include not only the cross- through 90° for horizontal applica- withstand the roughest of handling
overs and signal processors but tions. on the road and on stage.
also DYNACORD‘s innovative pro-
tective circuits: the individual loud- As well as exemplarily low distortion, The front is protected by a sturdy
speaker components are safeguar- these horns are remarkable for the powder-coated steel grille lined
ded from thermal overload by the very low frequencies at which they with high quality acoustic foam.
all-electronic Voice Coil Tracking retain their directivity. The smaller The logo can be rotated through
Protection system as well as halogen enclosures are equipped with 90° and therefore looks right whether
protectors. VariLine loudspeakers Electro-Voice DH3 titanium domes, the enclosures are mounted verti-
can therefore be driven by extre- whilst the VL 122 and larger cally or horizontally. The 12“ and
mely powerful amplifiers to obtain models feature Electro-Voice ND6 15“ enclosures are asymmetric,
the widest possible dynamic range neodymium drivers with 3“ voice which not only optimizes them for
without their voice coils sustaining coils and 1.4“ exits. These advan- floor monitoring but also facilitates
damage – even when operating tageous horn / driver configura- the creation of clusters.
errors occur. Furthermore, any tions provide crisp and powerful
thermal overload triggers a ‚soft‘ high-resolution HF reproduction.
power reduction, free from the dis-
tracting switching noise that is the
bugbear of conventional protective
circuits. The 12“ and 15“ models
offer the additional option of swit-
ching to active two-way operation.
50
VariLine loudspeakers are A wide range of installation Flying brackets are optional
equipped with extremely low- hardware is available for VariLine accessories for precise loudspeaker
distortion, state-of-the-art fullrange cabinets providing aiming at the listening areas.
drivers that provide not only a classic three-point eyebolt
linear frequency response but hanging, wall or ceiling bracket In installation applications, the
also a wide dynamic range and mounting and, even more con- bracket can be equipped with
high power handling. venient, three-level adjustable truss clamps for flying while an
mounting. adapter enables stand mounting.
The 6“, 12“ and 15“ transducers A TV spigot enables easy changing
are armed with neodymium magnets from truss to stand mounting while
– which, incidentally, contributes additional adapters provide maximum
significantly to the exceptional flexibility for a comprehensive
lightness of VariLine cabinets. range of applications.
51
52
VL 62 and VL 262
TWO-WAY FULLRANGE CABINETS
The models VL 62 and VL 262 while a 90° x 40° HPT94 constant to pivot on both the vertical and
are extremely compact, two-way directivity horn handles everything horizontal axes.
fullrange cabinets suitable for a above. This is driven by Electro-Voice‘s
wide variety of mobile and brilliant and clean DH3 titanium MB and MB UMH brackets can be
installation applications. dome and can be rotated easily attached to the top or bottom using
through 90° when the cabinets are the two M10 threaded inserts
Their very high sensitivity (94 dB / operated in a horizontal position. provided, whilst four M6 threaded
97 dB @ 1 W / 1 m) and power inserts are provided on the back
handling make them stand out in Recessed Speakon connectors for conventional wall-mounting
their class. enable the VL 62 and VL 262 to brackets.
be placed close to walls. Two M10
Extremely low-distortion DND 6130-16 threaded inserts in the side of the A robust and hard-wearing, water-
neodymium drivers transduce the VL 262 are provided for the FB VL 262 repellent cover is available as an
low frequencies and midrange, bracket, which allows the cabinet accessory.
53
54
55
The vented SUB 18 and SUB 28 For maximum dynamics, the Sub WK 500 - FOR SUB18
direct radiators have been models can be driven by extremely
designed for subwoofer use in powerful amplifiers; thermal over-
active multi-way systems. load triggers a virtually inaudible
‚soft‘ power reduction.
The superior transient response of
the classic bass reflex construction The 18 mm multiply birch enclo-
also makes them suitable for medium sures feature a rugged dual compo-
to large bass arrays. nent structured finish. The woofers
are protected against damage and
The premium 700 W RMS long- inclement weather by a sturdy WK 600 - FOR SUB 28
excursion woofers boast extremely powder-coated steel grille lined
low THD, and the reliable, all-electro- with high quality acoustic foam.
nic Voice Coil Tracking Protection Wheel kits with four 100 mm
prevents thermal overload of the factory-assembled ‚Blue Wheels‘
100 mm sandwich voice coils. are available as options.
56
57
58
59
Accessories
VARILINE
60
ACCESSORIES
61
62
Monitor
Speakers
63
The DYNACORD CXM 15 is a connectors. The pin assignment in clicks and pops that are the bugbear
lightweight wedge for professional passive mode is 1+ / 1-. Switching of conventional solutions. Both
monitoring applications. The from passive mode to bi-amped FIR and IIR presets are available
DYNACORD DCX15450 two-way mode is performed by operation of for a wide variety of operating
15“ / 1.4“ transducer uses a a slider switch. In bi-amping mode, modes. The CXM 15 is constructed
coaxially mounted HF unit and pins 1+ / 1- are connected to the from birch plywood and therefore
can be used in passive or bi-amped 15“ low frequency section of the extremely resistant to abuse on
operating mode. CXM 15 and pins 2+ / 2- to the 1.4“ the road. All cabinet connections
mid-high-frequency section. are slotted and glued. The surface
The acoustic crossover frequency is protected by a hard-wearing
between the 15“ low-frequency The CXM 15 is equipped with three textured finish.
transducer and the 1.4“ mid-high Speakon sockets switched in parallel. A powder-coated steel grille backed
compression driver is at 1.2 kHz. The This simplifies the daisy-chaining of by acoustic foam protects the
slope of the built-in passive cross- multiple wedges and pole-mounted loudspeaker components from ac-
over network is 12 dB / octave. CXM 15 cabinets. The 1.4“ MF/HF cidental damage. A recessed adapter
Extremely precise vocal definition compression driver is safeguarded is provided to facilitate pole-moun-
is assured by the comparatively against thermal overload by the ting. Handles have been integrated
low crossover frequency and the fully-electronic Voice Coil Tracking into both sides of the CXM 15.
coaxial transducer design. Power Protection system, which exhibits
amplifiers are connected to the „soft“ switching characteristics, A version of the CXM 15 in white is
CXM 15 via Speakon NL4MPR sparing audiences the annoying also available: the CXM 15W.
64
AM 12
2-WAY ACTIVE SPEAKER CABINET
The perfect plug & play monitor supplies the Hi channel with ble for multimedia applications.
solution for a great many applications, 60 W. Thanks to the wide variety Additional tools are offered by the
the AM 12 is armed with a of available connection and pro- acoustic processing section: the
DYNACORD LFT 3008 12“ woofer gramming options (Mic, Line and Lo EQ is an adjustable LPN filter to
and a constant directivity horn for Aux) and the possibility of expan- control the punch; the Mid EQ is a
the midrange and high frequencies. ding the system through the addition 4 kHz DIP filter that can be used
of a passive monitor box, the AM 12 to rein in the aggression of horn
The integrated full-range Class H is capable of functioning either as sections; whilst the High EQ allows
power amplifier delivers 300 W to a complete monitor system or as you to increase or decrease the
the Lo channel, whilst the HF amplifier a small PA as well as being suita- brilliance according to taste.
65
66
PowerMax 5
· F 150
· F8
67
68
PowerMax 5
TWO-WAY ACTIVE SYTEM
69
70
Xa 2 System
· FX 12
· FX 20
71
Xa 2 System
LOUDSPEAKER SYSTEMS
FX 12 FX 20 XA 4000
In a world of excess and mass set new standards in terms of audio the requisite protective circuits are
production, quality, functionality performance, reliability and value for capable of driving the widest variety
and design remain decisive money. Where the aim is to achieve of system configurations with abso-
factors. We at DYNACORD the highest on-axis sound pressure lute reliability. Thanks to the VCTP
develop and manufacture first- levels possible, fully horn-loaded protective circuits in the cabinets
class products – „Made in Germany“ systems remain the first choice. – the personal bodyguards of the
– that not only supply detailed, Typical Top 40 events, city open- loudspeakers – the maximum dyna-
optimized solutions to real air events and mobile DJ events in mic range is achieved along with the
problems encountered in day-to- which areas of up to 1,000 square highest level of reliability.
day practice but are a joy to use, meters have to be covered with
year after year. throws of up 40 meters – these are Light and easy to transport,
ideal applications for the Xa 2 sys- DYNACORD complete systems can
In fact, achieving the highest possible tems from DYNACORD. High-quality be set up extremely quickly thanks
quality levels and providing full and neodymium components, combined in part to their clear and intuitive
lasting satisfaction to our customers with Constant Q horns and paten- system cabling. These are advanta-
are our abiding and paramount ob- ted Planar Waveguide bass horns ges of real practical importance. So,
jectives: obligations that admit of no deliver maximum volume levels too, are the time saved and peace
exception. Complete audio systems combined with the highest possible of mind afforded by DYNACORD‘s
with plug & play functionality have audio quality. Active two-way power extensive range of TÜV-certified ac-
for many years been an indispensable amplifiers using Class H technology cessories, such as the FG 600 Flying
part of the DYNACORD sound rein- with switched-mode power supplies Grid (see Cobra), rigging ropes and
forcement range. The Xa 2 system and audio processors as well as all wedges that satisfy even the most
72
problematic and complex rigging calculations, controller adjustments subwoofer but two angled tops
requirements simply and safely. To or programming of limiters. If at per side should fit the bill. And if a
adapt to a multitude of very diffe- an open-air event extreme sound Top 40 band suddenly finds itself
rent sound reinforcement tasks and pressure levels are required in the with an audience 4,000 strong, the
venue acoustics of all descriptions, sub-bass, one sub per side can be same system amp is also capable of
the requisite Xa 2 components can added. If the brass brand playing in driving three subs plus two tops as
be configured swiftly and simply a marquee needs extremely broad well as additional front- or side-fills
without any need for complex coverage and fewer subs, a single without any difficulty.
73
Components
XA 2 SYSTEM
If you wish to use the Xa 2 top, The CDH 8040-14 80°x 40° Any additional full-range cabinets
the FX 12, as an individual cabinet Constant-Q HF horn with its ND 6-8 or smaller tops that may be
(e.g. to provide high-quality sound neodymium driver is responsible required as front- or side-fills can
reinforcement for the spoken for transducing frequencies above be mounted securely on top of the
word) driven by a power amplifier 1 kHz and is mounted coaxially in FX 20 to save space and also aimed
with normal pin assignments, the the Conical Waveguide midrange using the PCL 800 or VPM 1500
connector panel offers you the horn. Threaded poles, which are available
option of switching from „System“ as accessories.
(Pin 2+ / 2-) to „Normal“ (Pin 1+ / 1-)
and in that way revert to a standard
pin configuration.
74
The Planar Waveguide Basshorn With the FG 600 Flying Grid, The four flying tracks that are
FX 20 is armed with an Electro-Voice which is available as an accessory, standard features of the FX 12
heavy-duty EVX 180 B 18“ woofer. the FX 12 can be flown safely and tops, in combination with the
swiftly from a truss or attached to CSST Flying Wires available as
a genie (see Cobra). With the SE accessories, make it easy to
600 Rigging Strap Extension and a suspend the cabinets safely from
webbing strap, an entire wing trusses. Various detents are
comprising multiple tops can be provided, so that just the right
aimed swiftly and accurately. angle for each cabinet can be
obtained. Further cabinets can be
connected using CSSM Flying
Wires equipped with double studs.
The backs of both the FX 12 and
the FX 20 boast four robust
casters, whilst the tops are
furnished with two, and the
subwoofers with six, handles for
easier transportation and to
facilitate the safe stacking of the
cabinets.
75
FX 12
2-WAY HI-POWER TOP
76
FX 20
PLANAR WAVEGUIDE SUB
To generate the maximum against thermal overload by the cables obviates the risk of wiring
possible sound pressure, the FX 20 Voice Coil Tracking Protection errors when connecting up the
subwoofer features a Planar system, and even extremely high system. The Sub signal supplied by
Waveguide bass horn and a high- power peaks are transduced the system power amplifier is on
power EVX 180B 18“ woofer. accurately and powerfully without Pin 1+ / 1-, and the midrange / high
compromising the dynamic range. frequency signal on pin 2+ / 2- is
It covers a bandwidth from 30 Hz The cabinet is made from multiply looped through to the tops.
to 150 Hz with a maximum sound poplar plywood 15 mm thick cove-
pressure level of 132 dB / 1 m. red by extremely hard-wearing Four large rubber feet on the side
Two of these Planar Waveguide needle-felt carpeting. Two FX 20 and the same number on the bottom
subwoofers deliver up to 138 dB / subwoofers stacked one on top provide for safe stacking in a variety
1 m per side, creating an extremely of the other reach a height of 180 of configurations. No fewer than
dry and deep bass foundation for cm, creating the ideal plinth for six handles and four heavy-duty
Xa 2 systems. Like the top, the an‚ overhead‘ stack of FX 12 tops. castors on the rear facilitate safe
18“ woofer is securely protected Again, the use of four-pole Speakon transportation.
SYSTEM AMP
XA 4000
The Xa 4000 system amp is a two-way woofers, however, can be driven reliably
(Sub-Top) power amplifier that can and economically by a single amp. All
either be positioned laterally – for the requisite signal processing including
shorter cable runs to the cabinets – or the equalization, LPN filter, low-cut filter
centrally in the rack. Only two rack and active crossover, with its crossover
units in height and weighing a mere frequency of 140 Hz with 18 dB / octave
8.25 kg, this Class H power amplifier in a modified Butterworth structure, is
is equipped with a switch-mode power on board. From the front panel, the level
supply of the latest generation. It out- of the Sub and Top channels can be set
puts 1,100 W in the Sub and 900 W individually to allow optimization of the
in the Top channel – in each case into system to the geometry and acoustics of
4 Ω. Up to three tops and three sub- the room.
77
78
Cobra System
· Cobra-Top
· Cobra-Sub
· Cobra-4 Top
· Cobra-4 Far
· Cobra-PWH
· PWH 28
· Cobra-2 System
· Cobra-4 System
79
System Components
COBRA COMPACT LINE-ARRAY SYSTEM
In the events sound reinforcement notable for their precisely defined tinue to be the ‚weapons of choice‘.
business, among rental companies coverage patterns. When multiple mid-high cabinets
and in professional concert sound are used, however, it is physically
applications, two quite different In the rock ‘n‘ roll business in impos-sible to eliminate altogether
loudspeaker concepts have secured particular, but more generally in the comb filter effects that result
their own niches: horn-loaded any sound reinforcement context from the less than optimal addition of
systems, which are notable for in which the emphasis is primarily the sound waves radiating from each
their high degree of efficiency, and upon obtaining very high sound pres- cabinet. In more demanding concert
line-array systems, which are sure levels, horn-loaded systems con- sound applications, therefore, in
80
which far more is expected in terms used for medium-sized events with- at the highest level are guaranteed
of sound quality, line arrays have out quite considerable expense. In with the Cobra systems, to which
established for themselves a secure the Cobra-2 and Cobra-4 compact the Voice Coil Tracking Protection
position in the market. Thanks to the line-array systems, DYNACORD is (VCTP) to be found in each Cobra
extremely wide horizontal radiation offering a solution optimized in cabinet, serving as the personal
pattern of line arrays, combined practice even for those applications bodyguard of each loudspeaker
with their shallow and precisely that cannot economically be served chassis, makes a valuable contribu-
defined vertical focus, the unwanted by conventional, large-scale line tion. The fully-electronic VCPT
projection of sound waves onto arrays. The compact and easy to safety circuit monitors on a perma-
ceilings and floors can be avoided, handle DYNACORD Cobra systems nent basis the thermal operating
and, with it, the interference their in ‚flown‘ but also in ‚stacked‘ state of the individual loudspeakers
reflection from such surfaces would configurations also make line-array and ensures, in the event only of
otherwise cause. Conventional line performance available for the vast overload, that the power driving it is
arrays on the market, however, are majority of those frequently encounte- „gently“ reduced until a safe value
mostly conceived exclusively as large- red ‚bread and butter‘ events that is reached. The result is the widest
scale, ‚flying‘ sound reinforcement take place typically in town halls, possible dynamic range combined
systems, and despite their advantages marquees or in cities in the open air. with the maximum possible degree
in terms of quality cannot always be Reliability and operational security of operating security.
81
82
IRIS-NET
For the various systems, To simplify setting up the system, of the FIR equalization is absolu-
specific preconfigured‚system IRIS-Net contains standard tely linear frequency and phase
drives‘ are available, which in project files. These project files response throughout the system.
their maximum configuration with make tuning Cobra systems swift This provides the ideal starting
PowerH power amplifiers or DSP 600 and intuitive, since they already point from which the FOH engineer
or a P 64 matrix under IRIS-Net contain all the crossover and FIR can proceed at once to the task of
include even remote supervision equalization functions needed – tuning the system to the acoustics
and control, and DSP presets with though these can, if desired, also of the venue – whether in- or out-
FIR filter linearization. be edited by the user. The result of-doors.
83
COBRA-TOP
The flyable passive three-way
FULL-RANGE / MID-HIGH compo-
nent in the Cobra-2 system. Armed
with a 15“ Electro-Voice EVX155
speaker for the low frequency ran-
ge, a coaxial midrange line-array
composed of four C8 conical mid-
range drivers, and a DH 2T titanium
driver with a CD horn for the high
frequency range.
COBRA-4 TOP
The flyable active three-way MID-HIGH
component in the Cobra-4 system.
Armed with a 15“ Electro-Voice EVX
155 speaker for the low frequency
range, a coaxial midrange line-array
composed of four C 8 conical midrange
drivers and a DH 2T radiating into a CD
horn for the high frequency range.
84
COBRA-SUB
Flyable subwoofer with a bass-reflex
design armed with an Electro-Voice
18“ EVX 180 B driver. With grooves
to enhance stacking stability and
four ANCRA flying tracks for flown
sub-arrays included in the delivery.
85
COBRA-4 FAR
The flyable active three-way far-
field MID-HIGH component in the
Cobra-4 system. Identically equip-
ped in the low and midrange to
the Cobra-4 top but featuring a 5°
vertical high frequency line array,
composed of three Electro-Voice
DH 2T titanium drivers with an HF
waveguide horn.
PWH 28
1,400 W planar-waveguide-horn-
loaded, high-power sub-woofer
equipped with 2 x 18“ LFS 18700
transducers for very high sound
pressure levels and long throws in
Cobra-4 systems.
86
COBRA-PWH
A planar waveguide horn subwoofer
armed with an Electro-Voice 18“
EVX 180 B driver for bass repro-
duction in the Cobra-2 and Cobra-4
systems that is particularly powerful
and carries especially far.
87
02
05
06
88
Rigging Accessories
01 TC-04 - Truss Clamp, 2“, M12 Ring Nut
02 FG 600 - Flying Grid, TÜV approved
03 SE 600 - Strap Extension for FG 600
04 CSSG - Cobra System Strap Grid
(without picture)
05 CSST - Rigging Strap (Truss > Cabinet)
06 CSSM - Rigging Strap (Cabinet > Cabinet)
07 CSW 25 - Wedge Set (2 x Wedge 2,5°)
08
02 WS-04 - Webbing Strap 4 m (1-3 Cabinets)
09 WS-08 - Webbing Strap 8 m (4-8 Cabinets)
07
01 03
08 09
89
System Racks
90
ICP-88
ICP-48
ICP-44
CP-48
AC 232
91
Cobra-2
COMPACT LINE-ARRAY ACTIVE 2-WAY SYSTEM
The Cobra-2 system is designed area to be covered. The system or stack. A single Cobra-Top has
to provide high-quality sound amp racks are easily capable of a (horizontal x vertical) coverage
reinforcement for events in small driving up to six Cobra-Top and/ pattern of 120° x 30°; this is reduced
to medium-sized marquees or or six Cobra-Sub cabinets. If it is to 120° x 15° if a second, and to
halls covering distances of up to desired to expand the system, the 120° x 7.5° if a third, Cobra-Top is
40 meters and areas up to 1,000 amp rack is capable of accommo- added to the stack. When ground-
square meters. dating additional power amplifiers stacked, the Cobra-Top cabinets
(bass extension, front- / side-fills can be aimed with precision at
The system produces a maximum or monitors) as well as supplying the area to be covered through
sound pressure level of 137 dB L them with the requisite power via the use of the 2.5° wedges that
and 137 dB R in the mid / high fre- the AC connector panel. are supplied as standard. If added
quency range and up to 141 dB in pressure or projection is needed in
the bass. In its basic configuration, The maximum Cobra-2 configuration the bass, whether due to the style
the Cobra-2 system comprises four that makes sense comprises two of music or to the acoustics of the
Cobra-Top mid / high cabinets, Cobra-2 systems per side (four venue, Cobra-2 systems can also
four Cobra-Sub subwoofers, a Cobra-Tops and four to six Cobra- be armed with Cobra-PWH bass
ready-wired and pre-programmed Subs per side). Since, however, horns.
system amp rack and the requisite doubling the number of stacked or
4-pin loudspeaker system cables flown Cobra-Top cabinets results With two PWH cabinets (or three
along with a set of wedges (two in a halving of the vertical co- Cobra-Subs) superposed, you obtain
2.5° wedges that can be used either verage angle, particular attention a plinth the ideal height (180 cm)
side) that make it possible to aim must be paid in such cases to the for ground-stacking the Cobra-Top
the Cobra-Top cabinet to suit the aiming of the cabinets in the wing cabinets on.
92
93
Cobra-4
COMPACT LINE-ARRAY ACTIVE 4-WAY SYSTEM
The active 4-way Cobra-4 stacked configuration without required by typical Top 40 bands.
System in its standard configuration time-consuming adjustments. For Depending upon the geometry of
is designed for throws of up to 80 large distances, the top position in the room, these can be stacked
meters in medium-sized marquees, the stack is reserved for a Cobra-4 or arranged as a horizontal bass
halls and open-air venues. Far unit, which has a coverage array.
pattern of 90° (horizontally) and
It is capable of generating at a 5° (vertically) in the high frequen- The Cobra-4 System can be driven
FOH position 30 meters distant a cy range. either by ready-wired and pre-pro-
sound pressure level of 110 dB in For the low frequency and midrange, grammed amp racks, comprising
the mid-high frequency range and the same components are used a controller, power amplifiers and
120 dB in the bass – exactly what as in the Cobra-4 Top, providing AF- and AC connector panels, or by
the typical Top 40 band requires. the ideal extension for the low- individual (user-configured) racks.
Through the use of two Cobra-4 and midrange line array. In all, When PowerH power amplifiers are
Tops and one Cobra-4 Far, opti- eight Cobra-PWH bass horns are used in conjunction with RCM-26
mum line-array performance can needed to generate the pressure modules, advantage can be taken
be obtained even from a typical and projection in the bass region of FIR-linearized presets.
EASE FOCUS
94
95
96
Alpha System
· X-1
· B-3
97
What was designed without Their legend lies not only in their clubs and discotheques in Las Vegas,
compromise remains free from extreme reliability but also in their Miami and New York, throughout
compromise: in their almost extraordinarily clean (and giganti- Asia and the Middle East, and, of
fifteen-year history, Alpha cally powerful!) sound. course, also in Europe. The Alpha
systems have never tasted defeat; guarantees a club enthusiastic
and their triumphant progress Alpha systems are to be found guests, thereby ensuring a sure
continues apace, with successful in the most up-market, the most and swift return on its investment.
installations all over the globe. fashionable and the most popular
Alpha X-1
HORN-LOADED THREE-WAY HI-POWER LOUDSPEAKER SYSTEM
The Alpha X-1 system is a True Constant Directivity horn facilitates the formation of multiple-
horn-loaded, three-way loudspeaker (90° x 40° or 60° x 40°, according component clusters. The Alpha X-1
system. to choice) offers in the range from can be driven in active two-way or
The two vented 15“ loudspeakers 800 Hz to 8 kHz truly dynamic mid- active three-way mode, according to
combine with a conical short horn high reproduction, rich in presence. choice. But whichever mode is se-
to deliver extremely precise and The brilliant high-frequency repro- lected, every loudspeaker chassis is
punchy midrange and low frequen- duction of the 90° and 60° horns is reliably protected by thermal circuit
cy reproduction that extends right ensured by a pair of diffraction or breakers or halogen lamps against
down to 80 Hz and beyond. The 2“ ring radiators respectively. The Alpha critical power levels as well as short-
high-performance driver with its X-1‘s trapezoidal cabinet design term thermal overload.
Alpha B-3
2 x 18” PWH SUBWOOFER-SYSTEM
The Alpha B-3 system is a 2 x 18“ and that of the Helmholtz resonator. down to 30 Hz. They combine the
PWH subwoofer system employing At the same time, the design of the advantages of both direct-radiating
Planar Waveguide technology. PWH subwoofer is such as to limit and horn-loaded systems, and –
the cone‘s excursion, protecting thanks to their unique design – are
A PWH horn is a planar waveguide the diaphragm and guaranteeing markedly superior to conventional
horn with a Helmholtz resonator outstandingly accurate impulse solutions.
placed inside the wave guide. The reproduction, a very wide dynamic
resulting 6 to 7 dB gain in SPL range, extremely low distortion, Dynamic protections safeguard the
in the low frequency range is a and prolonged reliable operation. two 18“ speakers reliably against
product of the interaction between alpha B-3 systems offer directi- critical power levels as well as
the resonance of the waveguide vity in the low-frequency range short-term thermal overload.
SYSTEM DRIVES
98
99
D-Lite SERIES
Dimensions 282 x 442 x 259 282 x 442 x 259 430 x 586 x 321 430 x 586 x 321
(W x H x D) mm
Net. Weight 8.8 kg 9.0 kg 15.3 kg 16 kg
Accessories page 44 - 45 page 44 - 45 page 44 - 45 page 44 - 45
D-Lite SERIES
Dimensions 430 x 586 x 321 430 x 586 x 321 430 x 586 x 321 447 x 686 x 413
(W x H x D) mm
Net. Weight 18.6 kg 16.2 kg 19 kg 24 kg
Accessories page 44 - 45 page 44 - 45 page 44 - 45 page 44 - 45
100
D-Lite SERIES
SPL 1 W / 1 m 92 dB 99 dB 98 dB
Max. SPL 1 m / calc. 124 dB 131 dB 132 dB
Freq. Range 43 Hz - 350 Hz 55 Hz - 320 Hz 30 Hz - 300 Hz
(internal Hi-Cut) (internal Hi-Cut) (internal Hi-Cut)
Dimensions 445 x 380 x 445 464 x 601 x 660 547 x 724 x 658
(W x H x D) mm
Net. Weight 20 kg 34 kg 50 kg
Accessories page 44 - 45 page 44 - 45 page 44 - 45
D-Lite SERIES
Type / Name PowerSub 112 PowerSub 212 PowerSub 312 PowerSub 315
Cabinet Subwoofer Subwoofer Subwoofer Subwoofer
Configuration Powered Powered Powered Powered
1-Channel 1-Channel 3-Channel 3-Channel
Components 1 x 12“ 2 x 12“ 1 x 12“ 1 x 15“
Dimensions 445 x 380 x 445 445 x 755 x 445 445 x 380 x 445 464 x 601 x 660
(W x H x D) mm
Net. Weight 20 kg 39.5 kg 22.5 kg 45 kg
Accessories page 44 - 45 page 44 - 45 page 44 - 45 page 44 - 45
101
VariLine
Dimensions 217 x 375 x 230 217 x 543 x 230 385 x 715 x 374 441 x 780 x 407 385 x 1035 x 374
(W x H x D) mm
Net. Weight 8 kg 10 kg 24 kg 26 kg 34 kg
Accessories page 60 - 61 page 60 - 61 page 60 - 61 page 60 - 61 page 60 - 61
VariLine
SPL 1 W / 1 m 98 dB 101 dB
Max. SPL 1 m / calc. 132 dB 138 dB
Freq. Range 35 Hz - 700 Hz 35 Hz - 700 Hz
102
AM 12 TECHNICAL SPECIFICATIONS
AM 12
Type / Name AM 12
Cabinet Monitor
Configuration Powered 2-Way
Components 12“ / 1“
103
PowerMax 5
Type / Name FX 12 FX 20
Cabinet Mid - High Subwoofer
Configuration Passive 2-Way Planar
Horn loaded Wave-guide Horn
Components 12“ / 1.4“ 1 x 18“
104
Cobra SYSTEM
Type / Name Cobra-Top Cobra-4 Top Cobra-4 Far Cobra-Sub Cobra-PWH PWH 28
Cabinet Fullrange Fullrange Fullrange Subwoofer Subwoofer Subwoofer
Configuration Passive 3-Way Active 3-Way Active 3-Way Vented - Planar Planar
Direct Radiator Wave-guide Horn Wave-guide Horn
Components 15“ / 4 x 4“ / 1“ 15“ / 4 x 4“ / 1“ 15“ / 4 x 4“ / 3 x 1“ 1 x 18“ 1 x 18“ 2 x 18“
Dimensions 600 x 495 x 717 600 x 495 x 717 600 x 495 x 717 600 x 615 x 717 605 x 910 x 823 1205 x 605 x 1306
(W x H x D) mm
Net. Weight 60 kg 54.5 kg 63.5 kg 58 kg 72 kg 129 kg
Accessories page 88 - 89 page 88 - 89 page 88 - 89 page 88 - 89 page 88 - 89 page 88 - 89
105
Application Guide
106
Controllers -
Accessories 2 x BS 35
Horizontal 2 x 90°
Coverage
Typical Distance 10 - 15 m
Options -
Comments -
Controllers -
Horizontal 2 x 90°
Coverage
Options -
Comments -
107
Controllers -
Horizontal 2 x 90°
Coverage
Options -
Comments -
Amplifiers internal
Controllers -
Horizontal 2 x 80°
Coverage
Typical Distance 15 - 20 m
Options -
Comments -
108
Configuration Fullrange
Controllers -
Cables -
Horizontal 2 x 80°
Coverage
Typical Distance 10 - 15 m
Options -
Configuration Fullrange
Controllers -
Cables -
Horizontal 2 x 80°
Coverage
Typical Distance 15 - 20 m
Options -
109
Controllers -
Cables -
Horizontal 2 x 90°
Coverage
Typical Distance 15 - 20 m
Options -
Comments -
Xa4000 Xa4000
Xa 4000 Xa 4000
Controllers -
Cables -
Horizontal -
Coverage
Typical Distance 15 - 20 m
D 12-3 D 12
110
Controllers -
Cables -
Accessories 2 x BS 35
Horizontal 2 x 80°
Coverage
Typical Distance 15 - 20 m
Options 2 additional D 12
Comments -
Amplifiers -
Controllers -
Cables -
Accessories 8 x WMK 10
(Wall-Mount Kit)
4 x VL 62 4 x VL 62
Horizontal each cabinet 90°
Coverage
Options -
Comments -
111
Controllers -
Cables -
4 x VL 62 4 x VL 62 Accessories 8 x WMK 10
(Wall-Mount Kit)
or
Horizontal each cabinet 90°
1 x VL 262 Coverage
& 2 x VL 62
per side Total Amp Power 2 x 500 W Top,
1000 W Sub
Options -
Comments -
PowerSub 315
Amplifiers intergrated
Controllers -
Cables -
Accessories 4 x WMK 10
(Wall-Mount Kit) or
4 x FB-VL 262 &
4 x TC-02
2 x VL 262 2 x VL 262
Horizontal each cabinet 90°
Coverage
Options -
PowerSub 315
Comments -
MP7 or CMS Consoles
112
Controllers -
Cables -
FB-VL122 FB-VL122
Accessories 2 x FB-VL 122,
2 x PCL M10 or
2 x TC-02
Typical Distance 10 - 20 m
Options -
Comments -
Xa 4000 Xa 4000
Cables -
Accessories -
Typical Distance -
Options -
HF Pin 2+ / 2-
MF Pin 1+ / 1-
HF Pin 2+ / 2-
MF Pin 1+ / 1-
SUB 28 SUB 28
113
Accessories -
Typical Distance -
Options -
Amplifiers 1 x PM 2600
Controllers integrated
Cables -
Horizontal 2 x 90°
Coverage
Typical Distance 15 - 20 m
Comments
F8 F8 PM 2600 F8 F8
114
Xa 2 APPLICATION GUIDE
Controllers integrated
FX 12
Cables 4 x 4-pole long,
FX 12 FX 12 2 x 4-pole short
Typical Distance 25 - 35 m
FX 20 FX 20
Options FG 600 (Grid)
Xa 4000 Xa 4000
CMS 1600
FX 20 FX 20 FX 20 FX 20
Cabinet Types 4 x FX 12 + 8 x FX 20
Amplifiers 4 x Xa 4000
Controllers integrated
Horizontal 2 x 80°
Coverage
Typical Distance 30 - 40 m
Options -
FX 20 FX 20
FX 20 FX 20 FX 20 FX 20 FX 20 FX 20
115
Amplifiers 2 x LX 3000
Accessories CSW 25
Horizontal 2 x 120°
2 x Cobra-Top Coverage
LX 3000
CP-48
Accessories -
Horizontal 2 x 120°
Coverage
Typical Distance 30 - 50 m
Cobra-Top Cobra-Top
Options FG 600 (Grid)
Amp-Rack Amp-Rack
4 x Cobra-PWH 4 x Cobra-PWH
116
Controllers 6 x RCM-26
Cobra-Top Cobra-Top
Cables 8 x 4-pole long,
8 x 4-pole short
Cobra-Top Cobra-Top
Accessories -
Horizontal 2 x 120°
Coverage
Typical Distance 30 - 50 m
4 x Cobra-PWH 4 x Cobra-PWH
Horizontal 2 x 120°
Coverage
Typical Distance 40 - 80 m
Cobra-4 Top
Options -
CSW 25
2.5° Wedge
Comments 2 x prewired Amprack
incl. NF & AC-Panel
Amp-Rack Amp-Rack
4 x Cobra-PWH 4 x Cobra-PWH
117
Horizontal 2 x 120°
Coverage
Typical Distance 40 - 80 m
Options -
Cobra-4 Top
Comments -
CSW 25
2.5° Wedge
4 x Cobra-PWH 4 x Cobra-PWH
Amplifiers 8 x LX 3000
Accessories -
Cobra-4 Top Cobra-4 Top
Horizontal 2 x 120°
Coverage
Cobra-4 Top Cobra-4 Top Total Amp Power 4 x 2100 W
+ 12 x 1800 W= 30kW
Typical Distance 40 - 80 m
Amp-Rack Amp-Rack
8-Channel 8-Channel
118
Amplifiers 10 x H 5000
Cobra-4 Far Cobra-4 Far Controllers 10 x RCM-26
Accessories -
3 x PWH 28 3 x PWH 28
119
JAPAN
EVI Audio Japan Ltd.
Tel: +81 3 5485 4427
Fax: +81 3 5485 4428
THAILAND
Robert Bosch Limited
Tel: +662 639 3111
Fax: +662 631 2030
KOREA
Robert Bosch Korea Ltd.
Tel: +82 31 270 4765
Fax: +82 31 270 4601
TAIWAN
Robert Bosch Taiwan Co., Ltd.
Tel: +886 2 2515 5388 Ext. 2688
Fax: +886 2 2515 5399
VIETNAM
Robert Bosch Vietnam Co., Ltd.
Tel: +84 8 62583690
Fax: +84 8 62583693
INDONESIA
PT Robert Bosch
(Security Systems)
Tel: +62 21 5210600
Fax: +62 21 5214848
© Bosch Security Systems, Inc. · Art.Nr. F01U164883 · Printed in Germany (F&W/DR) · 6000/03/10 · Subject to change without prior notice!
www.dynacord.com
English
CONTENTS
Contents
2
ONE BRANDS FITS ALL
3
HISTORY
4
HISTORY
In 1945 Werner Pinternagel, in the meantime had moved to and often visionary products have
who was an engineer, founded a Landau and by then boasted a been presented ever since at all
workshop for the repair of radio staff of four employees, still bore important international trade fairs
devices in the Lower Bavarian the brand name ‘Dynaphon’. and marketed successfully throughout
town of Pilsting. The development the world. To make it possible to
and manufacture of audio amplifiers, From 1948 onwards, mixing and satisfy the enormous demand,
which he began at the same time, portable amplifiers bearing the DYNACORD moved to Straubing in
became a particular passion. name DYNACORD were being 1958. The workforce, which at that
sold to an ever expanding circle time numbered 80 employees, con-
These pioneering experiences of customers. Within a few years, tinued to expand rapidly. Several
formed the foundation for over the rapidly growing company had times, the production facility was
60 years of expertise in profes- become one of the leading enter- renovated or expanded.
sional power amplifier technology prises in the still young audio
— expertise upon which the brand technology industry. Already in Finally, in 1986 a new plant was
DYNACORD is able to draw today. 1954, the manual workshop have opened in which more than 500
Early results included the KI cinema given way to industrial production employees now develop, produce
amplifier with its output of 25 watts. as the product portfolio continued to and dispatch the company’s pro-
The devices of the company, which expand. The high-caliber, pioneering ducts to all corners of the globe.
5
MILESTONES
Milestones
THE CONSTANTLY EXPANDING PRODUCT
RANGE YIELDED MANY PRO AUDIO MILESTONES.
6
MILESTONES
PowerH
7
BOSCH PRODUCTION SYSTEMS
8
BOSCH PRODUCTION SYSTEM
Bosch Production
System
QUALITY WITH SYSTEM
9
MANUFACTURING
Measurement Hall
PART OF THE NEW INVESTMENT INVOLVED THE CONSTRUCTION AND
COMMISSIONING OF WHAT AT 600 SQUARE METRES IS ONE OF THE
WORLD’S LARGEST AUDIO MEASUREMENT HALLS.
Manufacturing
Since September 2006, DYNACORD has belonged
to the BOSCH concern’s Security Technology
department.
10
MANUFACTURING
11
RECOMMENDED APPLICATIONS
ConcertSound, Touring, Club/Disco, ProSound, Network
12
P 64 DIGITAL AUDIO MATRIX
Digital
Audio Matrix
· P 64
13
P 64 DIGITAL AUDIO MATRIX MANAGER
The P 64 Digital Audio Matrix Manager is a modular, matrix, dynamics, crossover, EQ, and even FIR filters.
networkable and freely configurable audio system The processing power of the DSP can be further
controller that allows designing complete system increased with extension modules. Freely expanding the
solutions. hardware configuration as well is possible through
four module slots located on the rear of the P 64.
In the DSP, any structures with up to 32 audio channels Theses slots can be equipped with 8-channel digital
are freely configurable. This is possible by the wide or analog input or output boards; even a special
variety of different DSP blocks available, such as mixer, microphone input card is available.
14
P 64 DIGITAL AUDIO MATRIX MANAGER
Several P 64s can be interconnected via a CobraNet and apply the results to an arbitrary number of other
network, which allows operation and supervision of parameters. This also provides the possibility for
even the largest decentralized audio systems. Integrated time-controlled operations.
control and logic functions ensure that complex operations Faults in and breakdown of the P 64 Manager itself
can be carried out without problem. and all devices integrated in the system are detected
automatically. An according message can be output
It is for example possible to link various parameters to each via control contacts, other interfaces or displayed on
other in a Task Engine using logic and arithmetic functions the PC screen.
15
P 64 DIGITAL AUDIO MATRIX MANAGER
16
P 64 DIGITAL AUDIO MATRIX MANAGER
THE P 64 PROVIDES OUTSTANDING AUDIO QUALITY (S/N RATIO > 115 dB);
THE NEWEST IN A/D AND D/A CONVERTER TECHNOLOGY AND ELABORATE
DSP ALGORITHMS ENSURE SUPERIOR SOUND REPRODUCTION.
DYNAMIC DSP POWER banks for the realization of longer processor-intensive FIR algorithms.
The wide variety of DSP blocks delay times or additional delay With its processing power of 1500
available, such as EQs, filter lines. MIPS (with input / output modules
(incl. FIR), mixer, matrix/router, max. 1900 MIPS), the P 64-1500
dynamics, crossover, delays, ADDITIONAL CHARACTERISTICS: is currently the most powerful pro
loudspeaker-controller and signal • 1300 MIPS processing audio processor.
generators, determine the processing capacity – doubling the
power needed. DSP processing power DSP-2
• 2 RAM banks (512K x 24 bits) DSP expansion module forming
The modular concept of the P 64 – for additional delay part of the P 64-1500 Set.
makes it possible to adjust the lines up to 21.8 sec.
configuration in an ideal fashion to • 48-bit signal processing The module is armed with additional
meet the requirements imposed. – double-precision DSP algorithms. DSPs to expand the signal processing
With each of the 8-channel input • Automatic configuration – reporting capacity as well as RAM storage
or output modules, the processing in IRIS-Net when new module was banks for the realization of longer
power of the P 64 is raised by a loaded or module was removed. delay times or additional delay
further 100 MIPS (million instruc- lines.
tions per second). With the DSP-1 P 64–1500 (SET)
expansion card, the processing power With the P 64-1500, the internal ADDITIONAL CHARACTERISTICS:
is increased by a further 300 MIPS. expansion slot gets equipped with • 1200 MIPS processing capacity
A wide variety of applications in the a DSP-2 module which is part of the • 3 RAM banks (512K x 24 bits)
fixed installation or concert sound set. – for additional delay
fields can therefore be realized in the lines up to 32.7 sec
highest audio quality with great As a result of the 3 additional dual- • 48-bit signal processing
flexibility. core processors on the DSP-2 module, – double-precision DSP algorithms
the signal processing capacity is • Automatic configuration – reporting
DSP-1 considerably increased. At the in IRIS-Net when new module was
The DSP-1 is a DSP extension module same time, applications requiring loaded or module was removed
for use in a DYNACORD P 64. long delay times (e.g. for delay
lines) benefit from the additional
The module is armed with additional RAM. The P 64-1500 is therefore
DSPs to expand the signal processing outstandingly well suited to com-
capacity as well as RAM storage plex tasks and the implementation of
17
P 64 AND IRIS-NET
P 64 and IRIS-Net
HIGH END LIVE APPLICATIONS
18
IRIS-NET
IRIS-Net
SOFTWARE
The P 64 Manager runs under touch panels. The universality and a precise impedance sweep of all
IRIS-Net, which is by far more flexibility of the IRIS-Net software loudspeakers in the system by the
than a common configuration application is one of the major push of a button. Besides detec-
software application, because strengths of the DYNACORD Digital ting failure of complete loudspeaker
IRIS-Net is also capable of Audio System – the complete audio systems, this also ensures that
controlling and supervising all system including all its components damage of a single speaker chassis
compatible components. can be configured, controlled, and is being detected. System status is
monitored using one single soft- queried continuously, fault condi-
IRIS-Net integrates all devices ware application. IRIS-Net supports tions are recognized and reported
of the manufacturer that can be Ethernet, CobraNet, CAN-Bus, USB and a protocol lists incidents by
configured and/or remotely cont- and, because of its open architecture, date and time.
rolled via PC in a comprehensive IRIS-Net is ready for future implemen-
audio system: in 2006 DYNACORD tations, such as e.g. Audinate Dante. Operation of the DYNACORD Digital
introduced a new series of IRIS-Net- Audio System using IRIS-Net takes
compatible amplifiers – the PowerH IRIS-Net is also suitable for the place in real-time via wall stations,
– followed by the P 64 Matrix realization of security-relevant systems touch panels, PC or even media
Manager and now the DSP 600. Our – even stadiums or airports – where control units. The change of a para-
current product range is completed life safety levels not only require meter at one of the control units
through the integration of the the complete monitoring and sur- is simultaneously indicated at all
DYNACORD DCS System which veillance of the connected devices other control units.
offers extended control and moni- themselves but also of connection
toring functionality. cables, interfaces, and connected Typical applications are for example:
loudspeaker systems. hotels, gymnasiums and multi-
Easy and comfortable operation is purpose facilities, cruise liners or
guaranteed through PWS pro- The “System Check” in particular sports arenas, but also live-con-
grammable wall stations and TPI is one distinctive feature that runs certs, clubs or open-air festivals.
19
P 64 I / 0 CARDS
MI-1
AO-1
AI-1
P 64 I / 0 Cards
The finest audio performance block connectors. A/D conversion length. 118 dB dynamic range – for
in the widest range of audio is taken care of by high-perfor- superior audio performance without
formats is available to users of mance, linear, 24-bit converters spurious noise.
the P 64. Analogue audio signals while internal signal processing is
— microphone or line level — can performed in 48-bit word length. Balanced inputs – high Common
be processed as well as digital Mode Rejection prevents long cables
audio signals in different formats. 117 dB dynamic range – for superior from picking up interference. Gain,
audio performance without spurious PAD, phantom power – programmable
High-quality converters in the noise. Balanced inputs – high input gain in steps of 6 dB, switchable
expansion modules ensure optimal Common Mode Rejection prevents PAD for Line level feeds, and +48V
audio quality at all times. In addition, long cables from picking up inter- phantom power switchable via
the CM-1 module permits the distri- ference. software.
bution of audio signals over an
Ethernet network. All modules are MI-1 AO-1
recognized automatically by the The MI-1 is an 8-channel micro- The AO-1 is an 8-channel analog out-
system and managed via the IRIS-Net phone input module for use in a put module for use in a DYNACORD
software. DYNACORD P 64 system. P 64 system.
20
P 64 I / 0 CARDS
CM-1
DO-1
DI-1
21
RECOMMENDED APPLICATIONS
ConcertSound, Touring, Club/Disco, ProSound, Network
22
SOUND SYSTEM PROCESSORS
Sound System
Processors
· DSP 600
· DSP 260
23
DSP 600
DSP 600
FIR-TUNE SOUND SYSTEM PROCESSOR
The DSP 600 is a networkable digital sound resolution 512-tap FIR filters, precise loudspeaker
system processor with 2 analogue inputs, 2 digital protection and a multi-stage delay concept, the DSP 600
AES / EBU inputs and 6 analogue outputs offering sets new standards in the field of digital loudspeaker
audio and signal processing of the highest quality processing. FIR-TUNE permits the use of DYNACORD
with a dual-core DSP topology, 24-bit linear AD / DA speaker settings with integrated crossover and FIR
converters and with 48-bit double-precision processing filter settings for the best possible linearization of
resolution. the magnitude and phase of the transfer function.
Over IRIS-Net, any desired number of DSP 600
At > 116 dB, the dynamic range of the DSP 600 is at processors, together with other IRIS-Net capable
the upper extreme of what is technically feasible; devices, can be configured and operated swiftly and
THD is less than 0.002%. With IIR filters and high- conveniently.
24
DSP 600
The configuration and control of the DSP 600 is Direct-access keys make it possible to edit parameters
handled either directly at the device or with the swiftly at the device. In all, 90 program-storage
help of IRIS-Net via Ethernet and / or USB. locations are provided, of which 60 are dedicated to
factory presets and a further 30 available for freely
An integrated 2-port Ethernet switch makes it pos- programmable user presets. The DSP 600 is compatible
sible to connect the device to a PC directly without with RCM-26 and P 64 speaker settings.
having to rely on the use of an additional external
switch. Furthermore, the control signal can be For fixed installation applications, five control inputs
passed directly from one device to the next in a can be used for switching between presets. Level
simple daisy-chain arrangement. Under IRIS-Net, the control displays are provided on the front panel for
Device Scan function facilitates the configuration of the inputs and for all 6 outputs with Limiter and Clip
the network. LEDs along with output mute switches, channel function
indicators SUB, LO, MID, HI and a backlit graphic
Six predetermined configurations are available plus display.
freely definable configurations via the 2 x 6 matrix
router: For installations and the rental business, the possibility
also exists of either permitting or blocking access
• 2-way stereo + Fullrange from the front panel to each individual editable para-
• 3-way stereo meter.
• 4-way mono + Fullrange
• 5-way mono + Fullrange
• 3-way stereo with a mono sub + Fullrange
• 4-way stereo with mono sub and low frequency
• freely assignable 2 x 6 matrix router
25
DSP 600
INPUTS
In the inputs, as well as the routing functions,
extensive editing possibilities are available:
• pilot-tone detection
• test signal generator
(pink noise, white noise, sine wave)
• VU meter for input signal
• 10-band parametric equalizer
• 31-band graphic equalizer
• delay
• input pad switch (-6 dB)
OUTPUTS
In each of the outputs there are two control areas.
PEQ DELAY PEQ X-OVER FIR DELAY POLARITY LEVEL LIMITERS OUTPUT
FILTER LEVEL
A unique and particularly remarkable feature is and finally the CHANNEL DELAY (1.000 ms) for
the multi-stage delay concept featuring dedicated evening out the run-times of e.g. subs and tops.
delays for different applications in complex audio Its clear structure, its wealth of possibilities, its
systems: the INPUT DELAY (1.000 ms) for synchronization exceptional user-friendliness, its outstanding audio
of the main PA to delay systems, the ARRAY DELAY performance – particularly in combination with the
(100 ms) for the synchronization of individual loud- FIR-TUNE settings for all applicable DYNACORD
speaker boxes within a cluster or stack, the X-OVER loudspeaker components – make the DSP 600 the
DELAY (10 ms) for evening out the run-times of ideal manager even for complex, modern, high-quality
individual loudspeaker components within a box, audio systems.
26
IRIS-NET INTERFACE
IRIS-Net Interface
With the IRIS-Net interface, especially intuitive and
comfortable operation is possible with the import
of loudspeaker data for visualization of the resulting
transfer function. IRIS-Net is downloadable free of
charge in the member area of the DYNACORD website:
www.dynacord.com
27
DSP 260
28
DSP 260
DSP 260
24-BIT DIGITAL SOUND SYSTEM PROCESSOR
With the DSP 260 digital 2-in-6 sound system inputs, a digital stereo input in AES / EBU format is
manager, DYNACORD is continuing its tradition of available.
producing innovative signal processors. The DYNACORD
DSP 260, a digital signal processor with 2 inputs FAST AND FLEXIBLE
and 6 outputs, is the ideal tool for the management The factory presets provide the correct configuration
and optimization of loudspeaker systems. for your DYNACORD system including all sound and
limiter settings.
Based on the most modern hardware, this system
manager offers both tried-and-tested and new Thanks to variably configurable parameter access,
algorithms for the simple and swift creation of active the DSP 260 is suitable for a wide variety of applica-
multi-way systems. tions; whether in fixed installations or on the road,
the DSP 260 adapts flexibly to every situation.
A high degree of user friendliness and reliability were
the design priorities along with attaining an extremely The DSP 260 includes all the precision tools for
affordable price point. loudspeaker management and system tuning pre-
viously reserved for devices in the highest price
categories.
STATE-OF-THE-ART SIGNAL PROCESSING
The 24-bit sigma-delta AD/DA converters and 32-bit The user-friendly software interface makes possible
floating point signal processor make possible a dyna- the complete control of all parameters even for critical
mic range of 111 dB. In addition to the two analogue applications.
29
DSP 260
01 02 03
04 05 06 07
01 02 03 02 03
04 05 06
30
EDITING SOFTWARE
Editing Software
DSP 260
The easy-to-operate DSP 260 editing software permits The graphic user interface offers intuitive and sure
the convenient editing of all parameters from a PC control of all DSP and device functions. Presets can
running under Windows. The computer is connected be stored on your computer as well as on the DSP 260
via the USB port on the front panel. hardware.
INTUITIVE SECURE
The intuitive user interface of the DSP 260’s Protect your system against unwanted interference.
editing software offers swift access to all the pa- Access to individual parameters as well as their
rameters relevant to system tuning and configu- visibility on the DSP 260’s display is freely pro-
ration. All changes are displayed graphically and grammable.
realized in real time.
31
RECOMMENDED APPLICATIONS
ConcertSound, Touring, Club/Disco, ProSound, Network
32
POWERH SERIES
The PowerH power amp series represents a further milestone in the 60-year
PowerH Series
pro audio tradition of DYNACORD.
For years now, countless large and very large sound reinforcement
systems installed or on tour throughout the world have been relying on
DYNACORD / Electro-Voice power amps. Thousands of amplifiers made
by DYNACORD have been deployed on every continent and performed
with distinction at many of the truly major productions of recent years.
33
POWERH SERIES
PowerH Series
HI-END REMOTE CONTROLLABLE POWER AMPLIFIERS
The demands placed on modern topologies meriting consideration second breakdown limit for short
power amplifiers are enormous: to two concepts only: Class D and periods leads directly to a failure
maximum output, minimum DYNACORD’s Linear Grounded of the power transistors and the
weight, the highest possible Bridge Class H. Linear Push-Pull power amplifier. The use of exotic
degree of efficiency, outstanding concepts with Class H topology 350 V-specified transistors affords
audio characteristics, absolute are proven solutions for power no reliable solution in view of their
reliability, remote supervision levels up to 1500 W / 4 Ω. second breakdown behaviour,
and remote control as well as their performance and also their
network capability. This is the approach adopted by availability.
many DYNACORD power amplifiers.
To realize stable outputs of 2500 W / The limitation of the Class H push-pull Higher power classes require
4 Ω and 3500 W / 2 Ω per channel, approach is the 250 V specification different solutions! DYNACORD‘s
power amplifiers must be capable of typical audio power transistors linear Grounded Bridge designs
of making available peak output and their second breakdown (e.g. L2400 / P3000) have proved
voltages of 180 V to 200 V. This restrictions. Even exceeding the extremely reliable over many years
requirement limits the number of specified peak voltage or the as well as outstanding in terms
34
POWERH SERIES
35
POWERH SERIES
The power amplifiers of the the loudspeakers. DYNACORD power Under abnormal thermal ‚worst
PowerH series represent a amplifiers are known for their case‘ conditions, the CPU activates
milestone in the design and absolute reliability under the most a voltage limiter or gain reduction
production of high-performance arduous of conditions on the road. depending upon the requirements of
power amplifiers. Naturally this is also true of the the situation, so as to obviate the
PowerH models. need for a thermal shutdown of
Their innovative multi-stage Grounded the power amplifiers. All corrective
Bridge Class H topology with its In addition to the legendary manu- measures are indicated by LEDs on
floating switching power supply facturing quality that comes with the front panel and detailed clearly
offers very high and stable output the ‚Made in Germany‘ label, the on the liquid crystal display. In
power, very high efficiency, an comprehensive set of protective addition, a report is created making
extremely high level of audio circuits plays an important role it possible to enquire later as to all
performance and extremely low here: an integrated micro-controller such ‚interventions‘, each of which
weight. coordinates tried-and-tested is time-stamped.
protections against short-circuit,
They are therefore the ideal drivers HF or DC at the output, back EMF, The mains voltage is monitored
for professional touring and high- overheating and open-circuit opera- and displayed continuously, with
end concert sound, as well as pro tion, the power-up current limitation the devices adapting automatically
sound, applications. Through the and dynamic audio limiters as well to 230 V, for example, or 120 V. At
use of IRIS-Net-compatible remote as making additional new and high- the same time, the mains current
control modules, they also offer ly intelligent protective functions consumption is also monitored
extensive remote supervision and possible: for example, the tempe- and displayed. The trip value of the
control functions as well as a uni- rature in the power amplifiers is automatic circuit breakers can be
versal two-channel digital controller monitored at no fewer than six dif- set by the user via the display of
including ultra-precise FIR filtering ferent points and the front-to-rear the power amplifier to prevent the
and digital algorithms to protect ventilator governed accordingly. circuit breakers tripping. Any short-
36
POWERH SERIES
circuits at the output of the power intermodulation distortion (IMD- sensitivity 0 dBu. In addition, there
amplifier are detected early on, SMPTE) and dynamic intermodulation are switches for Bridged Mode and
even at low levels. The protective (DIM) are well below 0.05 % and Parallel / Dual as well, naturally, as
circuit is activated and a report on therefore well below the limit of a Ground Lift switch.
the fault in question appears simulta- audibility. All the components of
neously on the front display. In the the switching power supply are so A latching PowerCon connector
event of excessive high-frequency safely dimensioned that they are is provided for the mains power
overload, there is an automatic level capable of delivering the maximum line, which prevents the plug
reduction to protect the power peak output current of 70 A conti- being yanked out accidentally. The
amplifier itself and also the loud- nuously (H 5000), thereby allowing power outputs are implemented
speaker components connected. the power amplifier to operate as Speakon sockets. The signal of
as a stable voltage source even Output B is additionally available on
The large, background-lit liquid with extremely low loads. PowerH pins ±2 of Output A, so that with
crystal display delivers comprehensive power amplifiers therefore have 4-pin wiring a two-way system can
status information, error reports a significant amount of headroom be driven. Parallel to these, additio-
and measurements as well as at their disposal, which results in nal binding posts are provided. In
allowing you to control the basic superlative dynamics even with terms of connectivity, therefore,
settings and (with the IRIS-Net low loads. PowerH power amplifiers satisfy
module integrated) select presets all the demands of both mobile
as well. PowerH power amplifiers leave applications and pro audio fixed
nothing to be desired in terms of installations.
In addition to extreme reliability connectivity. For the inputs, XLR
and forward-looking operating IN / parallel OUT sockets are provi- German engineering. Manufactured
security, the PowerH power amplifiers ded along with additional Phoenix in accordance with the Bosch
are impressive for their outstanding connectors. The gain is switchable Production System (BPS) in Straubing,
audio performance. The THD, between 32 dB, 35 dB and input Germany.
37
SYSTEM RACKS
ICP-48
System Racks
ICP-44
ICP-88 AC 232
38
RCM-26
RCM-26
DIGITAL CONTROLLER MODUL FOR PowerH
FIR-TUNE
The RCM-26 is a dual-channel digital controller is unmatched in terms of its capabilities and audio
module for live sound, PA and fixed installation. It performance. The IRIS-Net Remote Control Module
offers all conventional signal processing functions RCM-26 extends the functionality of PowerH power
such as parametric equalizers, crossovers, delays, amplifiers by providing:
compressors and limiters.
• Remote Control
It also makes available linear phase FIR filters, zero-latency • AES3 (AES / EBU) digital inputs
FIR filters and digital loudspeaker protection algorithms • digital signal processing including FIR-TUNE
to permit the dynamic range of the amplifier to be • loudspeaker protection algorithms
exploited to the full. In addition to the electronically • system integration and networking
balanced analogue inputs of the power amplifier, digital • linear 24-bit AD / DA converters,
inputs in AES3 (AES / EBU) format are on board. sigma-delta, 128 x oversampling
Using the CAN bus, networks of up to 250 power am- • dynamic range > 116 dB
plifiers can be realized. Additional interfaces include the • 48 kHz sample rate, 96 kHz optional
RS-232 interface for media control and the Control Port • THD+N < 0.005 %
with freely-programmable control inputs and outputs • 2 DSPs 150 MHz / 300 MIPS computational power
(GPIO). Despite its compact dimensions, the RCM-26 • 48-bit double-precision algorithms
39
IRIS-NET
SUPERVISION AND DIAGNOSIS and conduct a full examination of, a very large audio
The RCM-26 transmits all relevant amplifier data to system at the push of a button.
the IRIS-Net user interface, supervising the operating
status of the power amplifiers, the temperature in the Even in live performance, the connected load is moni-
power blocks and in the power supply, voltages and tored continuously. Any undershooting (short-circuit)
currents at the outputs, all protections, the mains or overshooting (interruption) of the set tolerance
voltage and current consumption, pilot tone and network limits is automatically detected and reported imme-
status. diately.
It is even easy to examine the state of loudspeakers Users can create their own linear phase ‚brick-wall
that are difficult to access, such as those in stadiums X-over‘ and edit them in real time. For DYNACORD
or large entertainment venues. The System Check loudspeaker cabinets and systems, factory presets are
function allows you to measure comprehensively, available with linear phase ‚brick-wall‘ FIR crossovers.
40
IRIS-NET
These provide users wishing to tune the system themselves as stored in user memories, from which they can be
with a completely linearized frequency and phase response retrieved and reloaded subsequently.
upon which to build.
DSP FUNCTIONS
SYSTEM FREQUENCY RESPONSE IN DISPLAY • X-over: Linkwitz-Riley, Butterworth, Bessel
For DYNACORD loudspeaker cabinets, measurements • FIR Filters: zero latency
of the frequency and phase response are already pro- processing, linear phase X-over
vided in the IRIS-Net. • Master EQ: 6 filters per channel; PEQ,
This data together with the filter, crossover and delay lo-shelf, hi-shelf, hi-pass, lo-pass selectable
settings conducted in the RCM-26 can be displayed • Channel EQ: 6 filters per channel; PEQ, lo-shelf,
and taken into account by IRIS-Net. The superposition hi-shelf, hi-pass, lo-pass, all-pass selectable
shows the resulting accoustical frequency response of • Master delay : 2 ms - 2000 ms per channel
the loudspeaker cabinet. • Channel delay: speaker alignment
• Dynamics: peak anticipation limiter per channel
REMOTE FUNCTIONS • Protection: TEMP limiter for
Remote control of the power amplifier under IRIS-Net thermal loudspeaker protection
provides Power On / Standby switching and the • Others: input routing, level, mute,
programming of power-up sequences for the power polarity, sine and noise generators, VU meter
amplifiers as well as level settings and the muting of
individual channels or channel groups. In the RCM-26, IRIS-Net is downloadable free of charge in the member
all parameters can be controlled in real time as well area of the DYNACORD website: www.dynacord.com
41
RECOMMENDED APPLICATIONS
Live Music, ConcertSound, Touring | Pro Sound
42
LX SERIES
Ultra Lightweight
Premium Audio Performance.
LX Series
· LX 1600
· LX 2200
· LX 3000
· XA 4000
43
LX SERIES
LX Series
ULTRA LIGHT WEIGHT POWER AMPLIFIERS
44
LX SERIES
45
LX SERIES
46
LX SERIES
LX 1600
With an output rated at 2 x 1300 watts into 2 ohms
and 2 x 800 watts into 4 ohms, this is the ideal power
amplifier for small to medium-sized full-range cabinets
and MF / HF components in active multi-way systems.
LX 2200
With a stable output of 2 x 1600 watts into 2 ohms
and 2 x 1100 watts into 4 ohms, this is the ideal
amplifier for professional multi-way components as
well as medium-sized subwoofers in concert sound
systems.
LX 3000
The flagship of the LX series delivers a mighty 2 x
2100 watts into 2 ohms and 2 x 1500 watts into 4 ohms
and therefore has plenty of headroom for large sub-
woofer arrays.
XA 4000
Universally applicable system power amplifier for active
2-way systems. 1 x 1100 watts / 4 ohms (Lo) and 1 x
900 watts / 4 ohms (Hi). Crossover frequency 140 Hz.
47
RECOMMENDED APPLICATIONS
Live Music | Concert Sound, Commercial
48
SL SERIES
SL Series
· SL 900
· SL 1200
· SL 1800
· SL 2400
49
SL SERIES
50
SL SERIES
SL Series
SOLID ALL-ROUNDERS AT A COMPETITIVE PRICE POINT
The level controls on the front are calibrated in dB transient behaviour of loudspeakers. The resulting
and recessed into the front panel to guard against dynamization cannot be achieved with any graphic
mechanical damage. The easy-to-read LED display with or parametric equalizer or ‘bass booster’, since the
its Power, Protect, Signal and Limit indicators offers way the LPN operates is based to an important extent
a quick overview of the operating state of the power upon a dynamic optimization of the slew rate of the
amplifiers. signal. The switch allows you to compare the acoustic
difference with and without the LPN. The whole
signal becomes much more powerful and voluminous.
+12
A -3
consoles and signal processors. All the models in the
SL series are designed for a Constant Gain of 32 dB.
-6
The power outputs for Channels A and B as well as
-9
the Bridged Out are on Speakon connectors. The signal
of Output B is additionally available on pins ±2 of
-12
Output A, so that with 4-pin wiring a two-way system
can be driven. A Ground Lift switch is also provided to
10 20 50 100 200 500 1k
Hz
2k 5k 10k 20k 50k 100k
separate the chassis ground from the signal ground in
order to eliminate ground loop hum.
LPN-FILTER
The switchable Low-Pass Notch (LPN) filter is a typical German engineering. Manufactured in accordance
DYNACORD special feature. This filter circuitry with the Bosch Production System (BPS) in Zhuhai,
corrects the frequency response and optimizes the China
51
RECOMMENDED APPLICATIONS
Multi Media, Club/Disco, Pro Sound, Commercial | Network
52
DSA SERIES
DSA Series
· DSA 8405
· DSA 8410
· DSA 8805
· DSA 8204
· DSA 8206
· DSA 8209
· DSA 8212
53
DSA SERIES - MULTI-CHANNEL
UNIQUE FLEXIBILITY
THROUGH VLD
The ability to switch individually the
mode of each power amp channel
helps the DSA multi-channel power
amplifiers to achieve a degree of
flexibility never before possible. In
low impedance operation (2 Ω, 4 Ω,
8 Ω), each channel can drive up to
four 8-ohm loudspeaker cabinets.
The output channels can also be
paired in bridged mode. Depending
upon the application, each channel
can be switched individually even
in high-impedance mode (HZ) in
order to drive 70 Vrms or 100 Vrms
loudspeaker lines directly without
an output transformer (Direct
Drive). The power output by the
DSA multi-channel power amplifiers
is (along with its thermal capacity)
limited only by their maximum out-
put voltage and maximum output
current, which means they can drive
any load between 2 and 10 ohms
with their rated maximum outputs
of 500 W and 1000 W respectively
per channel.
54
DSA SERIES - MULTI-CHANNEL
1300 H 5000
H 2500
1200 LX 3000
LX 2200
1100
SL 2400
SL 1800
1000
SL 1200
SL 900
Output Power in Watts
900
800
700
600
500
400
300
200
100
2 4 6 8 10 12 14 16
Load Impedance in Ohms
55
RCM-810
56
RCM-810
RCM-810
DIGITAL CONTROLLER
R MOD
MODULE
DULE
E
LS
FOR ALL DSA-MODELS
57
DSA SERIES - DUAL-CHANNEL
58
DSA SERIES - DUAL-CHANNEL
Solid DYNACORD technology In addition, a power-up current which otherwise could lead to satura-
for fixed installations at very limiter prevents the blowing of the tion of the transformers when out-
competitive prices was the mains fuses. Fast audio processors put transformers are connected. A
maxims for the development of continuously compare the input Ground Lift switch is also provided
the DSA power amplifier series. and output signals. In the event of to separate the chassis ground
any non-linearity, the processors from the signal ground in order to
send control signals to the limiters, eliminate ground loop hum.
They offer a very high, stable out- which dynamically reduce the input
put with high efficiency at a high gain of the power amplifier. The POWER REMOTE connector
performance level. DSA power makes the task of remote controlling
amplifiers are therefore the ideal Input level controls on the rear panel the power amplifier as well as
choice for typical fixed installation and level and control displays on switching it on and off simple.
applications. the front panel offer a high degree
of user comfort, and a quick over- For further remote-supervision and
They are protected against over- view of the operating state of the control possibilities and integration
heating, short circuit and both power amplifiers is provided by into IRIS-Net networks, an optional
high frequencies and DC at the the easily read LED display with its remote control module (RCM-810)
output. Damage to the end transistors Power, Protect, Signal Display and is available. (see pages 56-57)
through the feedback of electrical Limit indicators.
energy is prevented by the back German engineering. Manufactured
EMF protective circuitry. During A switchable high-pass filter (HPF) in accordance with the Bosch
a soft start, a relay delays the (50 Hz, 18 dB / oct) can be used Production System (BPS) in Zhuhai,
switching on of the power outputs. to suppress low frequency signals, China.
59
RECOMMENDED APPLICATIONS
Commercial
60
PCL SERIES
PCL Series
· PCL 1125T
· PCL 1225T
· PCL 1240T
· PCL 1245
· PCL 1415
61
PCL SERIES
PCL Series
CONTRACTOR LINE POWER AMPLIFIERS
With the PCL series, DYNACORD at 8 / 4 ohms. Just like the PCL peak current limiters, to name a
is adding to its extensive power 1125T, they also provide floating few), which not only prevent the
amplifier range in the fixed loudspeaker outputs for 50 V, 70 V power amplifier itself from being
installation segment a number of and 100 V installations. PCL 1245 damaged but protect the connec-
models with fairly low to medium and PCL 1415 are low-impedance ted loudspeaker systems as well.
output levels. amplifiers with no output trans- All PCL models offer excellent head-
formers. Premium screw-lockable room for a wide dynamic range on
The power amplifiers are particularly Euro block connectors ensure a music signals.
designed for challenging sound more secure connection of audio
reinforcement tasks, background signal and speaker cables. The They are equipped with voltage
music / paging and public address independent rear level controls limiters to protect the loudspeaker
system installations. Long term relia- allow setting the according power outputs against high distortion
bility, operational safety, flexibility amp channel’s overall amplification. resulting in an output signal which
and versatility are guaranteed. never exceeds a THD (total harmonic
All PCL power amps feature different distortion) of 1 %.
The five models in the PCL series hi-pass filters with switch selectable
offer a variety of system design cut-off frequency to attenuate Multi-stage cooling fans additionally
and implementation possibilities. unwanted low frequency signals. guarantee absolute operational
The PCL 1225T and PCL 1240T Provided by each of the PARAMUS reliability even at increased operating
are equipped with distortionfree amplifier types are numerous temperatures.
high performance output transfor- protection circuits (short circuit, German engineering. Manufactured
mers and low-impedance outputs thermal overload, power on delay, in Asia.
62
PCL SERIES
Features
• five models from 160 W to 450 W per
channel; 4 ohm or 50 / 70 / 100 V
• compact 2U housing
• Euro block input plugs for simple setting-up
• single block plug for all output signals
• bridged mode for all
multi-channel models
• switchable high-pass filter in each
channel; 50 Hz or 300 Hz
• level controller for each
channel on the rear panel
• front-to-rear cooling
• numerous protective circuits
63
RECOMMENDED PRODUCTS / APPLICATION
Live Music Concert Sound Touring Multi Media Club/Disco ProSound Network Commercial Life Safety
Club-Gigs Corporate Large Live Boardrooms Clubs Theaters Conference Shops Voice-EVAC
Dance Bands Rental Productions Conferencing Lounges Concert Halls Centers Malls Industry
Mobile DJ Top 40 Events Small - Medium Hotels Discotheques HOW Hotels Bistros Railway
Festival Poolbars Stadiums Business BGM Offshore
Casinos Cruise LIners Buildings
Multifunctional Arenas
Halls Expo-Halls
PowerH Series
LX Series
SL Series
Multi Channel
DSA Series Dual Channel
PCL Series
64
TECHNICAL SPECIFICATIONS
Technical Specifications
DIGITAL AUDIO MATRIX
SOUND SYSTEM PROCESSORS
PROFESSIONAL POWER AMPLIFIERS
65
TECHNICAL SPECIFICATIONS
P 64
TECHNICAL SPECIFICATIONS
General P 64
Power Supply, Consumption 100 - 240 V AC, 50 / 60 Hz, 90 W max.,
(incl. 2 x AI-1, 2 x AO-1, 1 x CM-1modules)
Audio Slots 4 (for AI-1, AO-1, MI-1, DI-1 and / or DO-1 modules)
Network Slots 1 (for CM-1 module)
Interfaces Ethernet 10 / 100 MBit/s (1 x RJ-45), CAN Bus (2 x RJ-45), RS-232 (2 x 9pin D-Sub), USB (Type B, front)
GPIO Control Port 2 x 6-pole Euro block, 4 Control Inputs (analog 0-10 V / logic control),
3 Control Outputs (Relay contact to ground), 1 Fault Output (NC Relay contact),
3 Reference Outputs (+5 V / +10 V, 200 mA / GND)
Signal Processing 2 DSPs Standard (150 MHz, 300 MIPS), 1 DSP per Audio Module (100 MHz, 100 MIPS)
DSP-1 Extension Module optional (+300 MIPS), DSP-2 Extension Module optional (+1200 MIPS)
Sample Rate 48 kHz internal, 32 kHz - 192 kHz external
Data Format 24 Bit linear A/D conversion, 48 Bit processing
Operating Temperature Range 0 °C...40 °C
Dimensions (W x H x D), mm 483 x 88.1 x 381 (19”, 2 HU)
Weight 7.35 kg
66
TECHNICAL SPECIFICATIONS
P 64
67
TECHNICAL SPECIFICATIONS
DSP 600
TECHNICAL SPECIFICATIONS
General
Mains Voltage 100 - 240 V AC 50 - 60 Hz
Power Consumption 25 W
Operating Temperature Range 0 °C to 40 °C
Audio
Analogue Inputs 2 x XLR IN, electronically balanced
2 x XLR THRU OUT, electronically balanced
Digital Inputs 1 x XLR AES / EBU IN
1 x XLR AES / EBU THRU OUT
Digital Audio Format AES3, 32 kHz to 192 kHz sample rate
Nom. Input Voltage 1.55 V / +6 dBu
Max. Input Voltage 8.7 V / +21 dBu
(-6 dB analogue pad deactivated)
Input Impedance 10k ohm
Common Mode Rejection - 85 dB @ 1 kHz (typical)
A/D Conversion 24-Bit Sigma-Delta
Analog Audio Outputs 6 x XLR OUT, electronically balanced
Nom. Output Voltage 1.55 V / +6 dBu
Max. Output Voltage 8.7 V / +21 dBu
Output Impedance 50 ohm
D/A Conversion 24-Bit Sigma-Delta
Frequency Range 20 Hz - 22 kHz (+/- 0.5 dB)
THD+N < 0.002 % ( band limited 22 Hz - 22 kHz)
Dynamic Range 116 dB ( A-weighted)
Interface
USB USB Type B on front panel (PC Interface)
Ethernet 2 x RJ-45 ports, 100 MB, Intergrated Switch
Control Port 1 x 6-pole Euro block, Software Configurable for Preset Recall
Signal processing
Sampling Rate 48 kHz
Data Format 24-Bit
Internal Signal Processing 48-Bit Double Precision
Signal Processing Parametric EQs, 31 band Graphic EQs, Delays, Routing, X-Over,
512 Taps FIR filters, PA limiter, TEMP limiter, Level, Polarity,
Signal generator
Dimensions and weight
Dimensions (W x H x D), mm 483 x 356.1 x 43.6
Net weight 4.8 kg
Shipping weight 5.9 kg
68
TECHNICAL SPECIFICATIONS
DSP 260
TECHNICAL SPECIFICATIONS
General
Mains Voltage 100 - 240 V AC 50 - 60 Hz
Power Consumption 25 W
Operating Temperature Range 0 °C to 40 °C
Audio
Analogue Inputs 2 x XLR IN, electronically balanced
2 x XLR THRU OUT, electronically balanced
Digital Inputs 1 x XLR AES / EBU IN
Nom. Input Voltage 1.23 V / +4 dBu
Max. Input Voltage 8.7 V / +21 dBu
(-6 dB analogue pad deactivated)
Input Impedance 10k ohm
Common Mode Rejection -80 dB @ 1 kHz (typical)
A/D Conversion 24-Bit Sigma-Delta
Outputs 6 x XLR OUT, electronically balanced
Nom. Output Voltage 1.23 V / +4 dBu
Max. Output Voltage 8.7 V / +21 dBu
Output Impedance 50 ohm
D/A Conversion 24-Bit Sigma-Delta
Frequency Range 10 Hz - 22 kHz (+/- 0.5 dB)
THD < 0.01 % (22 Hz - 22 kHz)
Dynamic Range 111 dB unweighted, 22 Hz - 22 kHz
Interface
USB USB Type B on front panel (PC - interface)
9-pin DSUB Software configurable as GPI-preset recall,
Master / Slave configuration with second DSP 260
Signal Processing
Sampling Rate 48 kHz
Resolution 24-Bit
Internal Signal Processing 32-bit floating-point
Dimensions and weight
Dimensions (W x H x D), mm 483 x 356.1 x 43.6
Net weight 4.6 kg
Shipping weight 5.9 kg
69
TECHNICAL SPECIFICATIONS
PowerH Series
TECHNICAL SPECIFICATIONS
General H 2500
Load Impedance 2Ω 4Ω 8Ω
Maximum Midband Output Power, 1 kHz, THD = 1 % 2000 W 1450 W 850 W
Rated Output Power, 20 Hz ... 20 kHz, THD <0.1 % - 1200 W 600 W
Max. Single Channel Output Power Dynamic-Headroom, IHF-A 2400 W 1700 W 940 W
Max. Single Channel Output Power Continuous, 1 kHz 2050 W 1600 W 900 W
Maximum Bridged Output Power 1 kHz, THD = 1 % - 3800 W 2900 W
Maximum RMS Voltage Swing 1 kHz, THD = 1 % 95 V
Power Bandwidth, THD = 1 %, ref. 1 kHz, half power @ 4 Ω 10 Hz ... 50 kHz
Voltage Gain ref. 1 kHz 39 dB / 35 dB / 32 dB (switchable)
Input Sensitivity at rated output power @ 8 Ω, 1 kHz 0 dBu / +4 dBu / +7 dBu (switchable)
THD at rated output power MBW=80 kHz, 1 kHz < 0.05 %
IMD-SMPTE, 60 Hz, 7 kHz < 0.05 %
DIM 30, 3.15 kHz, 15 kHz < 0.02 %
Max. Input Level +22 dBu (9,76 Vrms)
Crosstalk, ref. 1 kHz at rated output power < -80 dB
Frequency Response, ref. 1 kHz < 10 Hz ... 30 kHz (± 1dB)
Input Inpedance, active balanced 20 kΩ
Damping Factor, 1 kHz > 400
Slew Rate 30 V/µs
Signal to Noise Ratio Amplifier A-weighted, 32 dB constant gain 109 dB
Output Noise, A-weighted < -70 dBu
Output Stage Topology Class-H Grounded Bridge
Power Requirements 100 V - 240 V, 50 Hz - 60 Hz; 100 V, 50 Hz - 60 Hz
Power Consumption at 1/8 maximum output power @ 4 Ω 1000 W
Protections Audio limiters, High temperature, DC, HF, Short Circuit, Back-EMF, Peak current
limiters, Inrush current limiters,Turn-on Delay, Mains Circuit Breaker Protection,
Mains Over / Undervoltage Protection
Cooling Front-to-Rear, 5-stage-fans
Ambient Temperature Limits +5 °C ... +40 °C (40 °F ... 105 °F)
Safety Class I
Dimensions (W x H x D), mm 483 x 88.1 x 498
Weight 14.2 kg (31.1 lbs)
Amplifier at rated conditions, both channels driven with 8 Ω loads, unless otherwise specified
70
TECHNICAL SPECIFICATIONS
PowerH 2500
General H 5000
Load Impedance 2Ω 4Ω 8Ω
Maximum Midband Output Power, 1 kHz, THD = 1 % 3500 W 2500 W 1500 W
Rated Output Power, 20 Hz ... 20 kHz, THD <0.1 % - 2100 W 1050 W
Max. Single Channel Output Power Dynamic-Headroom, IHF-A 4500 W 3200 W 1800 W
Max. Single Channel Output Power Continuous, 1 kHz 4100 W 2700 W 1600 W
Maximum Bridged Output Power 1 kHz, THD = 1 % - 7000 W 5000 W
Maximum RMS Voltage Swing 1 kHz, THD = 1 % 125 V
Power Bandwidth, THD = 1 %, ref. 1 kHz, half power @ 4 Ω 10 Hz ... 50 kHz
Voltage Gain ref. 1 kHz 41 dB / 35 dB / 32 dB (switchable)
Input Sensitivity at rated output power @ 8 Ω, 1 kHz 0 dBu / +6 dBu / +9 dBu (switchable)
THD at rated output power MBW=80 kHz, 1 kHz < 0.05 %
IMD-SMPTE, 60 Hz, 7 kHz < 0.05 %
DIM 30, 3.15 kHz, 15 kHz < 0.02 %
Max. Input Level +22 dBu (9,76 Vrms)
Crosstalk, ref. 1 kHz at rated output power < -80 dB
Frequency Response, ref. 1 kHz < 10 Hz ... 30 kHz (± 1 dB)
Input Inpedance, active balanced 20 kΩ
Damping Factor, 1 kHz > 400
Slew Rate 35 V/µs
Signal to Noise Ratio Amplifier A-weighted, 32 dB constant gain 111 dB
Output Noise, A-weighted < -70 dBu
Output Stage Topology Class-H Grounded Bridge
Power Requirements 100 V - 240 V, 50 Hz - 60 Hz; 100 V, 50 Hz - 60 Hz
Power Consumption at 1/8 maximum output power @ 4 Ω 1450 W
Protections Audio limiters, High temperature, DC, HF, Short Circuit, Back-EMF, Peak current
limiters, Inrush current limiters,Turn-on Delay, Mains Circuit Breaker Protection,
Mains Over / Undervoltage Protection
Cooling Front-to-Rear, 5-stage-fans
Ambient Temperature Limits +5 °C ... +40 °C (40 °F ... 105 °F)
Safety Class I
Dimensions (W x H x D), mm 483 x 88.1 x 498
Weight 14.5 kg (32.0 lbs)
Amplifier at rated conditions, both channels driven with 8 Ω loads, unless otherwise specified
71
TECHNICAL SPECIFICATIONS
Xa 4000
TECHNICAL SPECIFICATIONS
Xa 4000
72
TECHNICAL SPECIFICATIONS
LX 2200
LX Series
TECHNICAL SPECIFICATIONS
73
TECHNICAL SPECIFICATIONS
SL Series
TECHNICAL SPECIFICATIONS
74
TECHNICAL SPECIFICATIONS
SL 1200
75
TECHNICAL SPECIFICATIONS
76
TECHNICAL SPECIFICATIONS
DSA 8805
77
TECHNICAL SPECIFICATIONS
78
TECHNICAL SPECIFICATIONS
DSA 8212
79
TECHNICAL SPECIFICATIONS
PCL Series
TECHNICAL SPECIFICATIONS
PCL 1125T
80
TECHNICAL SPECIFICATIONS
PCL 1415
81
Notes
AMERICAS EMEA ASIA & PACIFIC
HEADQUARTERS AMERICAS HEADQUARTERS EUROPE, HEADQUARTERS APR
Bosch Security Systems, Inc. MIDDLE -EAST & AFRICA Robert Bosch (SEA) Pte Ltd.
12000 Portland Ave South, Bosch Sicherheitssysteme GmbH 11 Bishan St. 21
Burnsville, MN 55337, USA Werner-von-Siemens-Ring 10 Singapore 573943
USA–Tel: 1 800 392 3497 85630 Grasbrunn, Germany Tel: +65 6571 2534
Fax: 1 800 955 6831 Fax: +65 6571 2699
Canada–Tel: 1 866 505 5551 Contact & Visitor Address
Fax: 1 866 336 8467 EVI Audio GmbH AUSTRALIA
Latin America–Tel: 1 952 887 5532 Sachsenring 60 Bosch Security Systems Pty Ltd.
Fax: 1 952 736 4212 94315 Straubing, Germany Tel: +61 2 9683 4752
Tel: +49 9421 706 0 Fax: +61 2 9890 5928
Fax: +49 9421 706 265
CHINA
FRANCE Bosch (Shanghai) Security
EVI Audio France S.A.S Systems Ltd. (Shanghai) Co., Ltd.
Tel: +33 1 6480 0090 Tel: +86 21 6317 2155
Fax: +33 1 6006 5103 Fax: +86 21 6317 3025
JAPAN
EVI Audio Japan Ltd.
Tel: +81 3 5485 4427
Fax: +81 3 5485 4428
THAILAND
Robert Bosch Limited
Tel: +662 639 3111
Fax: +662 631 2030
KOREA
Robert Bosch Korea Ltd.
Tel: +82 31 270 4765
Fax: +82 31 270 4601
TAIWAN
Robert Bosch Taiwan Co., Ltd.
Tel: +886 2 2515 5388 Ext. 2688
Fax: +886 2 2515 5399
VIETNAM
Robert Bosch Vietnam Co., Ltd.
Tel: +84 8 62583690
Fax: +84 8 62583693
INDONESIA
PT Robert Bosch
(Security Systems)
Tel: +62 21 5210600
Fax: +62 21 5214848
© Bosch Security Systems, Inc. · Art.Nr. F01U164885 · Printed in Germany (F&W/DR) · 6000/03/10 · Subject to change without prior notice!
www.dynacord.com