Professional Documents
Culture Documents
110 Tonnes Liebherr LR1110
110 Tonnes Liebherr LR1110
LR 1110 EN
LR 1001.02
Concept and characteristics
LR 1110 Standard
• Excellent lifting capacities thanks to optimized distribution of forces
• New cabin with improved and ergonomic operating concept
• Convenient ladder to access the cabin
• Optimized air-conditioning and airflow in the cabin
• Catwalks and optional railings on uppercarriage and cabin
• Transport possible with mounted boom foot and crawlers
• Foldable catwalks remain with the machine during transportation
• Optional railings can be disassembled in a few steps using pin connections
2 LR 1110 – 1001.02
Option: LR 1110 with swinging counterweight
• Up to 20% increase in lifting capacities where tilting is the limiting factor
• Larger radii thanks to improved stability
• Function of swinging counterweight: the rear counterweight splits in the centre and is swung backwards to
a max. angle of 90°. The counterweight can adopt any position within this angle range. The optimized lifting
capacities are calculated online in real time via the LMI system and displayed in the operator’s cab.
• Easy and quick adaptation of the counterweight to the lifting requirements
• Swinging counterweight requires less counterweight – swinging back leads to improved ground pressure and
similar lifting capacities to those with full counterweight in standard position can be achieved.
• Swinging the counterweight back makes the machine narrower – this allows the machine to pass through
narrow spaces.
• For increased lifting capacities the swinging counterweight can also be added to other LR 1110 with
standard counterweight
LR 1110 – 1001.02 3
Dimensions
Basic machine with undercarriage
7916
3686
1922
787 1270
(1377*)
980
4300 900 347
6475 1582 5050
0
80 *)
R 44870
(R 90°
5280 4161
783 R6
R4 590
Option:
4194 6430 swinging counterweight 0 – 90°
14552 6430
*) with standard counterweight
6. Working radii are measured from center of swing and under load.
Equipment 7. The lifting capacities are valid for 360 degrees of swing.
Main boom (No. 1512.xx) max. length 71 m 8. Calculation of stability under load is based on DIN 15019 / part 2 /
Luffing jib (No. 1309.xx) max. length 66.8 m chart 1 and ISO 4305 Table 1 + 2, tipping angle 4°.
Max. combination main boom 38 m and luffing jib 66.8 m
Fixed jib (No. 0806.xx) 32 m 9. The structures are calculated according to F.E.M. 1.001 - 1998
Auxiliary jib 30 t (EN 13001-1; EN 13001-2).
4 LR 1110 – 1001.02
Transport dimensions and weights
Basic machine and boom (No. 1512.xx)
Basic machine
3472 with A-frame, 2x 120 kN crane winches, boom foot and crawlers,
without basic counterweight
Width 3500 mm
14552 1700 Weight without hoist rope 57000 kg
Weight of hoist rope 3.42 kg/m
3500
Boom section (No. 1512.22) 3m
Width 1610 mm
Weight incl. main boom pendants 471 kg
1476 Weight incl. main boom and luffing jib pendants 537 kg
3134
Boom section (No. 1512.22) 6m
Width 1610 mm
1476
Weight incl. main boom pendants 760 kg
6134 Weight incl. main boom and luffing jib pendants 870 kg
2690
Boom head (No. 1512.22)
Width 1819 mm
7983 Weight incl. main boom pendants 2190 kg
Transport options
Basic machine and crawlers
Basic machine
3125 with A-frame, 2x 120 kN crane winches, boom foot, without basic
counterweight and crawlers
Option 1354 914 Width 3500 mm
3036 Weight without hoist rope 37500 kg
14521
Weight of hoist rope 3.42 kg/m
3500
Crawler 2x
1267 Track pads 900 mm
Width 914 mm
6475 914 Weight 10200 kg
LR 1110 – 1001.02 5
Transport dimensions and weights
Luffing jib (No. 1309.xx)
6 LR 1110 – 1001.02
Transport dimensions and weights
Counterweight
Standard counterweight 1x
1021
Width 1475 mm
Weight 16000 kg
5270
Hooks
160 t hook block – 7 sheaves
820 Width 823 mm
Weight 4000 kg
2195
LR 1110 – 1001.02 7
Boom combinations
6 m (20 ft)
No. 0806.15
6 m (20 ft)
No. 0806.15
3 m (10 ft)
12 m (40 ft) No. 0806.15 11.7 m (38 ft)
No. 1512.22 No. 1309.20
5.5 m (18 ft)
No. 0806.16
12 m (40 ft)
No. 1512.22
12 m (40 ft)
No. 1512.22
12 m (40 ft)
No. 1512.22
12 m (40 ft)
No. 1512.22
6 m (20 ft)
No. 1512.22 12 m (40 ft)
No. 1512.22
3 m (10 ft) 3 m (10 ft)
No. 1512.22 No. 1512.22
8 LR 1110 – 1001.02
Technical description
Crawlers
Boom winch Propulsion through axial piston motor, hydraulically released spring
loaded multi–disc brake, crawler tracks, hydraulic chain tensioning
Line pull (6 layer)
th
86 kN device.
Rope diameter 20 mm
Track pads 900 mm
Boom luffing 44 sec. from 15° to 86°
Drive speed max. 2.8 km/h
Noise emission
Swing
Noise emissions correspond with 2000/14/EC directive.
Consists of rollerbearing with external teeth, swing drive with fixed axial Guaranteed sound pressure level LPA in the cabin ≤ 71 dB(A)
piston hydraulic motor, spring loaded and hydraulically released multi– Guaranteed sound power level LWA ≤ 108 dB(A)
disc holding brake, planetary gearbox and pinion. Vibration transmitted to the hand-arm system of the
Both swing modes are possible – speed control or free swing. machine operator < 2.5 m/s2
A multi–disc holding brake acts automatically at zero swing motion. Vibration transmitted to the whole body of the
Swing speed from 0 – 2.1 rpm continuously variable. machine operator < 0.5 m/s2
LR 1110 – 1001.02 9
Main boom 86° – 15° (No. 1512.xx)
ft m Auxiliary jib 30 t
88
280
80
86°
240 80°
72
70°
m
° 71
60 m
64 6 8
2000
200 5 m
6
° 2 m
50 6 The maximum capacity of the
56 9 m auxiliary jib is 30 t.
5
6 m The corresponding load chart is
5
m programmed in the LMI system.
5 3
160 48 m
5 0
7 m
4
°
m
40
4 4
40 m
41
m
120 38
m
35
32 m
°
32
30
m
29
m
80 26
24 m
23
20°
m
20
m
17
16 m
1 4
40
0 0
64 56 48 40 32 24 16 8 0m
Capacities in metric tonnes for boom lengths (14 m - 71 m) – with 120 kN winches
Boom length in (m)
Radius 14 17 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71 Radius
(m) t t t t t t t t t t t t t t t t t t t t (m)
3 115.5 3
4 113.1 111.9 96.2 91.7 86.3 82.1 4
5 93.1 88.1 83.6 79.5 75.9 72.4 67.4 60.8 53.5 48.3 41.9 5
6 74.0 70.6 67.6 64.8 62.3 59.9 57.6 55.5 50.5 46.1 40.8 40.6 34.3 30.7 27.2 6
7 61.2 58.8 56.6 54.6 52.7 50.9 49.2 47.5 46.0 43.8 39.0 39.3 33.2 30.0 26.8 24.4 21.8 19.3 17.6 16.2 7
8 50.6 50.3 48.6 47.0 45.6 44.1 42.8 41.5 40.3 39.1 36.8 36.9 32.3 29.2 25.9 23.6 21.2 18.9 17.4 16.1 8
9 42.8 42.8 42.5 41.2 40.1 38.9 37.8 36.7 35.7 34.7 33.8 32.8 31.3 28.3 25.2 23.0 20.7 18.4 16.9 15.6 9
10 37.0 37.0 36.9 36.6 35.7 34.7 33.8 32.8 32.0 31.1 30.3 29.5 28.8 27.5 24.4 22.2 20.2 18.0 16.6 15.1 10
12 28.9 28.9 28.9 28.8 28.7 28.4 27.7 27.0 26.3 25.7 25.1 24.4 23.9 23.3 22.7 21.0 19.3 17.1 15.7 14.3 12
14 23.5 23.5 23.5 23.4 23.4 23.3 23.2 22.7 22.2 21.7 21.2 20.7 20.2 19.7 19.0 18.4 17.6 16.5 15.0 13.6 14
16 19.6 19.6 19.6 19.5 19.4 19.3 19.2 19.1 18.6 18.2 17.7 17.1 16.6 16.0 15.5 14.8 14.2 13.6 13.0 16
20 14.5 14.5 14.4 14.3 14.2 14.1 14.0 13.9 13.7 13.3 12.8 12.3 11.9 11.5 10.9 10.4 9.9 9.4 20
22 12.7 12.7 12.5 12.5 12.3 12.3 12.1 12.0 11.7 11.3 10.9 10.5 10.0 9.5 9.1 8.6 8.1 22
26 10.0 9.9 9.8 9.7 9.6 9.5 9.4 9.2 8.9 8.5 8.2 7.8 7.4 7.0 6.5 6.1 26
28 8.9 8.8 8.7 8.6 8.5 8.3 8.2 8.0 7.6 7.3 6.9 6.5 6.1 5.8 5.3 28
32 7.1 7.0 6.9 6.8 6.7 6.5 6.5 6.2 5.9 5.5 5.2 4.8 4.5 4.1 32
34 6.3 6.3 6.1 6.0 5.9 5.8 5.6 5.3 5.0 4.6 4.3 3.9 3.6 34
38 5.1 5.0 4.9 4.7 4.6 4.5 4.4 4.0 3.7 3.4 3.1 2.7 38
40 4.5 4.4 4.3 4.2 4.0 3.9 3.6 3.3 3.0 2.7 2.4 40
44 3.6 3.4 3.3 3.2 3.1 2.9 2.7 2.4 2.1 44
46 3.1 3.0 2.9 2.7 2.6 2.4 2.1 46
48 2.7 2.5 2.4 2.3 2.2 48
50 2.2 2.1 50
34 t swinging counterweight 90° and 17.5 t carbody counterweight TLT 11943069 - M00000 V7
Capacities in metric tonnes for boom lengths (17 m - 71 m) - with 120 kN winches
Boom length in (m)
Radius 17 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71 Radius
(m) t t t t t t t t t t t t t t t t t t t (m)
6.9 16.2 6.9
7 16.2 7
8 23.6 21.2 18.9 17.4 16.1 8
9 28.3 25.2 23.0 20.7 18.4 16.9 15.6 9
10 33.4 33.5 30.5 27.5 24.4 22.2 20.2 18.0 16.6 15.1 10
12 30.6 29.9 29.2 28.5 27.8 27.2 26.3 23.2 21.0 19.3 17.1 15.7 14.3 12
14 26.4 26.4 26.3 26.2 25.8 25.3 24.7 24.2 23.6 23.1 22.5 21.3 19.7 18.4 16.5 15.0 13.6 14
16 22.2 22.2 22.1 22.1 22.0 21.9 21.8 21.7 21.3 20.8 20.4 19.8 19.2 18.7 18.1 17.2 15.5 14.2 13.0 16
18 19.0 18.9 18.9 18.8 18.7 18.6 18.5 18.4 18.1 17.6 17.0 16.5 16.0 15.5 14.9 14.3 13.3 12.3 18
20 16.5 16.4 16.4 16.3 16.2 16.1 16.0 15.9 15.8 15.4 14.9 14.4 14.0 13.5 12.9 12.4 12.0 11.4 20
22 14.4 14.5 14.3 14.3 14.1 14.0 13.9 13.8 13.6 13.1 12.7 12.3 11.8 11.4 10.9 10.5 10.0 22
26 11.5 11.4 11.3 11.2 11.1 11.0 10.9 10.7 10.5 10.1 9.8 9.4 8.9 8.5 8.1 7.7 26
28 10.2 10.2 10.0 10.0 9.8 9.7 9.6 9.5 9.1 8.8 8.4 8.0 7.6 7.2 6.8 28
32 8.3 8.2 8.1 8.0 7.9 7.7 7.6 7.5 7.2 6.8 6.5 6.1 5.8 5.4 32
34 7.4 7.4 7.2 7.1 7.0 6.9 6.8 6.5 6.2 5.8 5.5 5.2 4.8 34
38 6.1 6.0 5.9 5.7 5.6 5.5 5.4 5.1 4.8 4.5 4.2 3.8 38
40 5.4 5.3 5.2 5.1 5.0 4.8 4.7 4.4 4.1 3.7 3.4 40
44 4.4 4.3 4.2 4.1 3.9 3.8 3.6 3.3 3.0 2.7 44
46 3.9 3.8 3.7 3.5 3.4 3.3 3.0 2.7 2.4 46
48 3.4 3.3 3.2 3.0 2.9 2.7 2.4 2.1 48
50 3.0 2.8 2.7 2.6 2.5 2.2 50
55 2.1 55
LR 1110 – 1001.02 11
Working range – luffing jib 78° – 15° (No. 1309.xx)
ft m
112
360
104
8m
66. m
8
320 63.
96
m
.8
60 8 m
88 .
57
280
52 .1 m
80
49 .1 m
55
46 .1 m
43 .1 m
240
40 .4 m
72
37 .4 m
34 .4 m
m
31 .4
28 .7 m
64
25 .7 m
200
22 .7 m
m
.7
56
160 48
83° 88°
75°
40 65°
m
41
120 m
38
5 m
3
°
32
45
m
32
m
29
6 m
80 24 2
m
23
0 m
2
7 m
16 1
40
0 0
64 56 48 40 32 24 16 8 0m
Boom configuration for main boom lengths (17 m – 41 m) – see table on page 10
Jib configuration for jib lengths (22.7 m – 66.8 m)
Length Amount of luffing jib extensions
Luffing jib foot 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib insert 3m 1 1 1 1 1 1 1 1
Luffing jib insert 6m 1 1 1 1 1 1 1 1
Luffing jib insert 11.7 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4
Luffing jib head 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib length (m) 22.7 25.7 28.7 31.7 34.4 37.4 40.4 43.4 46.1 49.1 52.1 55.1 57.8 60.8 63.8 66.8
Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
LR 1110 – 1001.02 13
Lift chart – luffing jib (No. 1309.xx) TLT 11943069 - M00000 V7
Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
LR 1110 – 1001.02 15
Lift chart – luffing jib (No. 1309.xx) TLT 11943069 - M00000 V7
Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
LR 1110 – 1001.02 17
Working range – luffing jib 78° – 15° (No. 1309.xx)
ft m
112
360
104
8m
66. m
8
320 63.
96
m
.8
60 8 m
88 .
57
280
m
80
.1
m
55
.1
m
52
.1
m
49
240
.1
m
72
46
.4
m
43
.4
m
40
.4
.7 m
37
31 .4
m
64
34
25 .7 m
200
.7 m
28
7
m
.
56
22
160 48
83° 88°
75°
40 65°
m
41
120 m
38
5 m
3
°
32
45
m
32
9 m
2
6 m
80 24 2
m
23
0 m
2
m
16 17
40
0 0
64 56 48 40 32 24 16 8 0m
Boom configuration for main boom lengths (17 m – 41 m) – see table on page 10
Jib configuration for jib lengths (22.7 m – 66.8 m)
Length Amount of luffing jib extensions
Luffing jib foot 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib insert 3m 1 1 1 1 1 1 1 1
Luffing jib insert 6m 1 1 1 1 1 1 1 1
Luffing jib insert 11.7 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4
Luffing jib head 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib length (m) 22.7 25.7 28.7 31.7 34.4 37.4 40.4 43.4 46.1 49.1 52.1 55.1 57.8 60.8 63.8 66.8
Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
LR 1110 – 1001.02 19
Lift chart – luffing jib (No. 1309.xx) TLT 11943069 - M00000 V7
Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
LR 1110 – 1001.02 21
Lift chart – luffing jib (No. 1309.xx) TLT 11943069 - M00000 V7
Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.
LR 1110 – 1001.02 23
Working range - fixed jib 15° and 30° (No. 0806.xx)
ft m
315 96
15°
88
280 °
30
80
240 m
72
32 m
29 m
26 m
64 23 m
200 20 m
17 m
14 m 83° 88°
56 75°
11
65°
m
160 53
48 0 m
5
m
47
° m
45 44
40 1 m
4
120 8 m
3
5 m
3
32 m
32
m
29
m
80 26
24 m
2 3
0 m
2
16
40
0 0
72 64 56 48 40 32 24 16 8 0m
Capacities in metric tonnes with fixed jib (No. 0806.xx), 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For
actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.
LR 1110 – 1001.02 25
Lift chart - fixed jib (No. 0806.xx) TLT 11943069 - M00000 V7
Capacities in metric tonnes with fixed jib (No. 0806.xx), 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For
actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.
ft m
315 96
15°
88
280 °
30
80
240 m
72
32 m
29 m
26 m
64 23 m
200 20 m
17 m
14 m 83° 88°
56 75°
11
65°
m
160 53
48 0 m
5
7 m
4
° m
45 44
40 m
41
120 m
38
5 m
3
32 m
3 2
m
29
m
80 26
24 m
23
0 m
2
16
40
0 0
72 64 56 48 40 32 24 16 8 0m
LR 1110 – 1001.02 27
Lift chart - fixed jib (No. 0806.xx) TLT 11943069 - M00000 V7
Capacities in metric tonnes with fixed jib (No. 0806.xx), 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For
actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.
Capacities in metric tonnes with fixed jib (No. 0806.xx), 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For
actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.
LR 1110 – 1001.02 29
Notes
LR 1110 – 1001.02 31
LR 1110 — 11921430 — Version 04 — 09/2018 Subject to change without notice.