Professional Documents
Culture Documents
PDS - Clean - Guard - 71F01 - EN - White PDF
PDS - Clean - Guard - 71F01 - EN - White PDF
SOLUTIONS
PRODUCT INFORMATION
Product CLEAN GUARD 71F01
Description Powdered Acid De-scaler & Cleaner
Benefits
Removes scale and Corrosion products.
Concentrated product.
Readily soluble.
Low fumes & toxicity
Does not burn.
Specification
Appearance : White crystalline powder
Bulk Density : 1.25 g/cm3
pH of 1% solution : 1.0 – 1.5
Flash Point : Non-flammable
Culligan Hazard Category : DP - Acidic solid
U.N. No. : 2967 Acidic
Application IMDG Class : 8; Corrosive
Calcium deposits and corrosion products in any system will reduce flow,
heat transfer and overall efficiency.
The management system of Culligan Middle East FZE has been assessed and
certified as meeting the requirements of ISO9001:2008 and ISO14001:2004 by SGS
United Kingdom Ltd. for the following activities:
Development, manufacture and supply of speciality chemicals for commercial and
industrial water and wastewater treatment including the ongoing monitoring of
water treatment programmes.
Last updated 01 March 2015 Page 1 of 3 pages PDS_Clean_Guard_71F01_EN
FLUSHING
SOLUTIONS
PRODUCT INFORMATION
The actual application of CLEAN GUARD 71F01 will depend upon the type
of system to be cleaned and the degree of fouling. Please refer to our
Standard Procedures for acid cleaning / descaling with CLEAN GUARD
71F01 – SP-F02 and SP-F03.
The usage rates and most efficient method of addition and cleaning for a
specific application will be advised and monitored by a Culligan Engineer
as part of our expert consultancy services.
Packaging CLEAN GUARD 71F01 is available in 30 kg fibreboard containers.
Other packaging is available upon request.
Safety Products in this category are acidic in nature and have pH values below 4.0-
4.5.
These products are ton-toxic, non-flammable and non-oxidizing.
Materials in this category are corrosive to body tissue.
They are also solids and may therefore generate dust while being handled.
Materials in this category are acidic and corrosive to body tissue and must
be handled with great care. Skin and eye contact must be avoided and
gloves and goggles should be worn, along with protective overalls and
apron when handling the product or solutions containing the product.
A mask should be worn when handling the material in order to prevent the
inhalation of dust.
Do not store with Category B (Alkaline), C (Highly Alkaline) or O
(Oxidising) products or materials.
Ensure that the operator is fully informed and familiar with the use of the
product.
The management system of Culligan Middle East FZE has been assessed and
certified as meeting the requirements of ISO9001:2008 and ISO14001:2004 by SGS
United Kingdom Ltd. for the following activities:
Development, manufacture and supply of speciality chemicals for commercial and
industrial water and wastewater treatment including the ongoing monitoring of
water treatment programmes.
Find our nearest office at www.culligan.ae
Last updated 01 March 2015 Page 2 of 3 pages PDS_Clean_Guard_71F01_EN
FLUSHING
SOLUTIONS
PRODUCT INFORMATION
Store out of the reach of children and away from thoroughfares.
Please refer to the Material Safety Data Sheet for more detailed information.
The management system of Culligan Middle East FZE has been assessed and
certified as meeting the requirements of ISO9001:2008 and ISO14001:2004 by SGS
United Kingdom Ltd. for the following activities:
Development, manufacture and supply of speciality chemicals for commercial and
industrial water and wastewater treatment including the ongoing monitoring of
water treatment programmes.
Find our nearest office at www.culligan.ae
Last updated 01 March 2015 Page 3 of 3 pages PDS_Clean_Guard_71F01_EN