Professional Documents
Culture Documents
Material Safety Data Sheet: 1 Identification of Substance
Material Safety Data Sheet: 1 Identification of Substance
Material Safety Data Sheet: 1 Identification of Substance
1 Identification of Substance:
Composition:
Moisture: ±4.0% as received SNI 01-1683-1989
Ash: 2.5%-3.0 % dry basis SNI 01-1683-1989
Volatile Matters: 20.0%-25.0% dry basis SNI 01-1683-1989
3 Hazards Identification
Hazards designation:
Potential acute health effects: slightly hazardous in case of skin
contact (irritant), of eye contact (irritant, of ingestion, of
inhalation)
Additional information:
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and Storage
Storage temperature: Keep containers tightly closed and at room
temperature.
Special sensitivity: Avoid agitation of container for potential
breakage. Use outdoors with good ventilation.
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering control to keep airborne levels below recommended
exposure limit.
Eye protection: Use safety glasses or goggles, there is potential
for dust exposure that may cause injury to the eyes.
Skin protection: Wear fabric gloves.
Respiratory protection: A dust respirator may be used.
Engineering controls: Product is used outdoors, avoid breathing the
burning vapors.
12 Ecological Information:
Environmental Toxicity: Not determined
13 Disposal Considerations
Disposal method: This material is a solid with potential dust from
breakage, wear dust mask or dust respirator and remove the solid
material. Dispose according to the regulations of local, state and
Federal regulatory agencies.
14 Transport Information
REFERENCE
BECKJORINDO, Certificate of Self Heating Test, No. 210316,
Ref.023/BPL/I/20, dated January 10,2020.
BECKJORINDO, Report of Analysis, No. 210316, Ref.023/BPL/I/20,
dated January 10,2020.
THIS INFORMATION IS FURNISHED WITHOUT WARRANTY AND ANY USE OF THE PRODUCT
NOT IN CONFORMANCE WITH THIS MATERIALS SAFETY DATA SHEET OR IN
COMBINATION WITH ANY OTHER PRODUCT OR PROCESS, IS THE RESPONSIBILITY OF
THE USER.