Professional Documents
Culture Documents
Test (Electrostatics& Current Electricity)
Test (Electrostatics& Current Electricity)
the system in this process is AIEEE 2007 electric field will be due to
B
a ) , (K - 1)Cv
(b)Cv(K -1)/K
(c)(K -1)Cv (d) zero (a)2
(b) only the positive charges
14 A battery is used to charge a parallel plate (c) all the charges
capacitor till the potential difference between the (d) +91 and -g1
plates becomes equal to the electromotive force of 19A charged particle q is shot towards another
he battery. The ratio of the energy stored in the
charged particle Q which is fixed, with a speed
v.
apacitor and the work done by the battery willbe
AIEEE 2007 It approaches Q upto a closest distance r and then
returns. If q was given a speed 2v, the closest
(a) 1 (b) 2
1 distance of approach would be
(d)
(
15Two insulating plates are both uniformly charged
in such a way that the potential difference (b) 2r
(a) r
between them is V, -V 20V. (ie, plate 2 is at a
=
(a)
Y
-0.1 m
L
2 (c) (d)
(a) 2.65x 10 ms1 (b) 7.02 x10 ms1
(c) 1.87 x10 ms d) 32 x 101 ms1
resistlance 152 gives full 10
alvanometeer of
A galv
scale
A www ww
21 for a
current ot 2 mA. Calculate the
dection needed to convert it into an
shun
nt resistance 20
of range 5A. 6V
nmeter
(a)0.178Q (b) 0.0020
(c)0.006 2 (d) 52
s of the three wires of same material are in
Mas.
(a) 32 (b) 2
22 lengths in the ratio of
and their
ao Tatio of1:2:3 (c) 6/50 (d) 5/6
a-2: 1. Electrical resistance ofthese wires will be 26 In the circuit shown in figure. The point F is
ratio of
in the grounded. Which of the following is wrong
(a)1:1:1 (b) 1:2:3 statement?
( C9
) :4:1 (d)27:6:1
represents a current-voltage behaviour w
23 The graph
Br
fa
of water voltameter figure spot the correct
explanation.
DT 3V
10V
40
wwww. E
2
www.
2R
6 ww
5 ww
(a) R (b) R3
(14V 0.8 2)
c) 2R3 (d) 3R/5
resistances is
24 An infinite ladder network of (a) 6.56 A
shown
2Qresistance as
Constructed with 1Q and (b) 3.28 A
between A and B has
n figure. The 6V battery (c) 2.18 A
etfective
negligible internal resistance then (d) 1.09 A
resistance between A and B is
20
In the circuit in figure the potential difference
29 wwA
across P and Q will be nearest to
www 30
1002 6V 60
48V 10 40
ww- D W
800-oQ
1002 200 oP (a) 5 V (b) 9V
(c) 10.4 VV (d) 11.4 V
. The V -I graph for a conductor at tempe
(b) 6.6 V
36 T and T2 are as shown in the figure, "Th
(a) 9.6 V ne
(c) 4 V (d) 3.2 V T-T is proportional to tetm
A DC milliammeter has a resistance of 12N and
30
current of 0.01 A.
gives a full scale deflection for a T2
To convert it into a voltmeter giving a full scale
deflection 3V, the resistance required to be put in
series with the instruments
(a) 102 Q (b) 2882
(c) 300 2 (d) 4122
31 The length of a potentiometer wire is 5 m. An Current (
electron in this wire experiences a force of
4.8 x 10" N, emf of the main cell used in (b) sin 24
(a) cos 29
potentiometer is (c) cot 20 d) tan 29
(a) 3 V (b) 15 V
(d) 5 V
37 A 6V battery is connected to the terminals ot.
(c) 1.5 V three metre long wire of uniform thickness an
32 In a potentiometer of 10 wires, the balance point resistance of 100 2 The difference of potential
is obtained on the 7th wire. To shift the balance
between two points on the wire separated by a
point to 9th wire, we should
distance of 50 cm will be
(a) decrease resistance in the main circuit (a) 2 V (b) 3 V
(b) increase resistance in the main circuit (c) 1 V (d) 15 V
c) decrease resistance in series with the cell
whose emf is to be measured
(d) increase resistance in series with the cell
whose emf is to be determined
33 In an experiment to measure the internal
resistance of a cell by potentiometer, it is found
that the balance point is at a length of 2 m when
the cell is shunted by a 4Q resistance; and is at a
length of 3 m when the cell is shunted by a 8Q
resistance. The internal resistance of the cell is,
then
(a) 122 (b) 82
(c) 162 (d) 1
34 A voltmeter having resistance of 1800 N is
employed to measure the potential difference
across 200N resistance which is connected to DC
power supply of 50V and internal resistance 202.
What is the percentage change in potential
difference across 200 Q resistance as a result of
connecting voltmeter across it ?
(a) 1% (b) 5%
(c) 10% (d) 20%
35 What is the potential difference between points
A and D of circuit shown in figure?