Professional Documents
Culture Documents
Acfrogco Icqft3wc09ecinalvuc9ekjzr11f6zyqxv-Vxntc4d-Anjtyn4 K63oll4wnyzd-H4rmt6w8pcaixbzxm3dxjbamym28d8hbzoenl0lziynkpr4ot4v8pmf2-Kan2nz6dthhbiai-Zd
Acfrogco Icqft3wc09ecinalvuc9ekjzr11f6zyqxv-Vxntc4d-Anjtyn4 K63oll4wnyzd-H4rmt6w8pcaixbzxm3dxjbamym28d8hbzoenl0lziynkpr4ot4v8pmf2-Kan2nz6dthhbiai-Zd
Emergency Stop
Never push the emergency stop button unless there is an emergency. You want to press the feed hold button
to fix problems. Emergency stops the whole machine and shuts it down. Is an override button
Step 1:
When using machines ask the teacher first if you can.
Step 2:
Next power on the machine. Follow directions that the machine tells you
Step 3:
Next is to set up your operations(setting tools your piece).
MDI:
Manuel Data Input
Program Select:
Where you select your program to run. Like a warm-up.
Hand Jog:
When you manually control the position of the machine. Its a little knob you can turn to move the machine
around.
ATC:
Automatic Tool Changer
Feedrate:
This is an override button and tells the machine how fast to move the machine. How fast the machine cuts
Feed Hold:
You press this button to stop the program and to reset the welding if there is a problem. Feed Hold stops the
machine immediately so it won't move.