Professional Documents
Culture Documents
Pages From Aluminium Cladding (Type 8) (BD Submission)
Pages From Aluminium Cladding (Type 8) (BD Submission)
Pages From Aluminium Cladding (Type 8) (BD Submission)
2.7.3 Computer analysis of 6063-T6 50x50x3mm thk. aluminium vertical stiffener (@1100c/c) ------------- 77
2.7.4 Check for 6063-T6 50x50x3mm thk. aluminium horizontal stiffener (@1100c/c) ---- 82
2.8 Check for 6063-T6 70x29.5x6.5mm thk. aluminium mullion ------------------------------------ 117
2 8 1 Check
2.8.1 Ch k for
f fixing
fi i ---------------------------------------------------------------------------------- 122
2.9.1 Check for 40x40x3mm thk. aluminium stiffener (@350c/c) ------------------------------ 140
2.9.2 Check for connection between alujminium stiffener and cladding ----------------------- 146
2.9.3 Check for connection between alujminium stiffener and cladding ----------------------- 154
5.3
5 3 Check for anchor bolt fixing (@800c/c)
(@800c/c)-------------------------------------------------------------- 295
Project: PROPOSED DEVELOPMENT AT
SKYCITY SITE A2 L894,
PORTION OF CHEK LAP KOK
LOT NO. 3
Wah Tung Facade Company Limited Prepared: Date: 31-Aug-20
Checked: File: Page:
P t 22: Signage
Part Si ddesign
i -------------------------------------------------------------------------------------------------- 385
2.1 Check for 3003-H14, 4mm thk. vertical aluminium panel ---------------------------------------- 389
2.2 Check for 6063-T6 50x80x3mm thk. aluminium stiffener (@400c/c)--------------------------- 391
2.3 Check for connection between stiffener and aluminium cladding-------------------------------- 394
2.4 Check for connection between aluminium cladding and steel mullion-------------------------- 398
2.5 Check for 3003-H14, 4mm thk. horizontal aluminium panel ------------------------------------- 401
2.6 Check for 6063-T6 50x80x3mm thk. aluminium stiffener (@400c/c)--------------------------- 403
2.7 Check for connection between stiffener and aluminium cladding-------------------------------- 407
2.8 Check for connection between aluminium cladding and steel mullion-------------------------- 411
2.10 Check for 6063-T6 50x80x3mm thk. aluminium stiffener (@400c/c)--------------------------- 418
Project: PROPOSED DEVELOPMENT AT
SKYCITY SITE A2 L894,
PORTION OF CHEK LAP KOK
LOT NO. 3
Wah Tung Facade Company Limited Prepared: Date: 31-Aug-20
Checked: File: Page:
2.11 Check for connection of stiffener---------------------------------------------------------------------- 422
3.2 Check for 80x80x5mm thk. GMS SHS (for large logo "11")------------------------------------- 438
3.3 Check for 50x50x5mm thk. GMS SHS (for small logo "11")------------------------------------- 456
3.6.2
3 6 2 Check for 100x100x6mm thk GMS angle
angle---------------------------------------------------- 562
Project: PROPOSED DEVELOPMENT AT
SKYCITY SITE A2 L894,
PORTION OF CHEK LAP KOK
LOT NO. 3
Wah Tung Facade Company Limited Prepared: Date: 31-Aug-20
Checked: File: Page:
3 8 Check
3.8 Ch k ffor 40 40 4
40x40x4mm thk GMS angle--------------------------------------------------------------
thk. l 615
Part 1: Appendix
Appendix A
Appendix B
Appendix C
Appendix D
Appendix E
Part 2: Appendix
Appendix A
Appendix B
Appendix C
Appendix D
Appendix E