Professional Documents
Culture Documents
3" TC-X800 Series: Air-Operated Double Diaphragm Pumps Air-Operated Double Diaphragm Pumps
3" TC-X800 Series: Air-Operated Double Diaphragm Pumps Air-Operated Double Diaphragm Pumps
FLUID Outlet
equivalent to
3” TC-X800 Series
ANSI 150 3B
DN 80 PN 10 The TC-X800 Series pumps offer excellent flow rates and a new heavy duty body
JIS 10K 80A
EXHAUST
design. The pumps can operate with variable air pressures and are suited for both start/
NPT 3/4 stop and fully continuous duty pumping applications. They can easily handle high
pressure and long discharge lines.
SPECIFICATIONS
EXHAUST
NPT 3/4
NPT ¾
41.1” (1044 mm)
1
14-100 PSI (0.1 - 0.7 MPa) 22-100 PSI (0.15 - 0.7 MPa)
Liquid Discharge Volume per cycle 230 oz (6800 mL) 108 oz (3200 mL)
FLUID Inlet
equivalent to 3" ANSI flange 150 lb
ANSI 150 3B Connection Suction x Discharge JIS 10K 80A
DN 80 PN 10
JIS 10K 80A
Weight 155.4 lbs (70.5 kg)
5.1” (129 mm)
* See Chart and Model Number nomenclature on back page for materials
Note 1: A supply air pressure of 22 PSI (0.15 MPa) or more is required to operate the pump. If the supply pressure is less than 22 PSI (0.15 MPa), the pump may not operate properly.
15.2” (387 mm) 6.3” (160 mm) 4-Ø 0.6” (14 mm) Pump Liquid Temperature Range: 32-140°F (0-60°C)
4-Ø 0.4”
(10.2mm) Ambient Temperature Range: 32-158°F (0-70°C)
26.8” (681 mm) 13.2” (336 mm)
Slurry Recommendation: 0.39" (10 mm) or less
27.8” (705 mm) 17.6” (448 mm) Viscosity Limit: Suction lift ~3000 cps (3 Pa·s) Force in ~8000 cps (8 Pa·s) (Please contact your distributor for more details)
Flow Conditions:
TC-X800AT ST FT PT 20” (50cm) flooded suction.
WET END MATERIALS Air
Ambient temperature: 77°F (25°C)
Liquid temperature: 70-77°F (21-25°C)
Outer
Code Pump wetted parts Diaphragm Ball Valve/Valve Seat
Diaphragm Plate
Center Body
100 PSI
AC Neoprene™ Neoprene™ 70.5 SCFM
90
Discharge Head
AN BUNA BUNA
AE EPDM EPDM 75
AV AL Alloy/AL Viton
®
Viton ®
AL 60 106 SCFM
AT PTFE PTFE
45
AH Hytrel™ BUNA
141 SCFM
30
AS Santoprene® EPDM
177 SCFM
SC Neoprene™ Neoprene™
SN BUNA BUNA 35 SCFM
SE EPDM EPDM
LPM
SV Cast SS/SS316 Viton® Viton® SS316
Conditions: GPM Conditions:
ST PTFE PTFE 20” (50cm) flooded suction. Flow 20” (50cm) flooded suction.
SH Hytrel™ BUNA Ambient temperature: 77°F (25°C) Ambient temperature: 73°F (23°C)
SS Santoprene® EPDM Liquid temperature: 70-77°F (21-25°C) Liquid temperature: 64-68°F (18-20°C)
AL
FC Neoprene™ Neoprene™ TC-X800A"X"/ S"X"/ F"X" (except T) TC-X800P"X" (except T)
FN BUNA BUNA
FE EPDM EPDM 125 PSI
70.5 SCFM
FV Cast Iron Viton® Viton® SS316
FT PTFE PTFE 100 100 PSI
106 SCFM 70.5 SCFM
FH Hytrel™ BUNA 90
Discharge Head
Discharge Head
80
FS Santoprene® EPDM 75
106 SCFM
PC Neoprene™ Neoprene™ 60 60
141 SCFM
PN BUNA BUNA 141 SCFM
45
PE EPDM EPDM 40 177 SCFM
30
PV PPG Viton® Viton® PPG (SCS13*) 212 SCFM 177 SCFM
35 SCFM
15 15 35 SCFM
PT PTFE PTFE
PH Hytrel™ BUNA
LPM LPM
PS Santoprene® EPDM
GPM GPM
Flow Flow
AL Alloy Aluminum Alloy (ADC12) Pure Poly Pure Polypropylene
AL
Cast SS
Aluminum (A5056)
Cast Stainless Steel (SCS14)
PTFE
PPG
Polytetrafluoroethylene (Teflon®)
Glass Fiber Reinforced Polypropylene
MODEL NUMBER NOMENCLATURE
SS316 Stainless Steel Grade 316 Santoprene® Thermoplastic PolyOlefin (TPO)
Cast Iron Cast Iron (S45C) Hytrel™ Thermoplastic Polyester Elastomer (TPEE)
BUNA
Neoprene™
Nitrile Rubber (NBR)
Chloroprene Rubber (CR)
EPDM
* SCS13
Ethylene Propylene Diene Monomer (Nordel™)
Cast Stainless Steel (insert material)
Series TC-X 800 P T - NPT - XXXX Special options
TC-X
Viton® Fluoroelastomer (FKM) Connection Type*
NPT: Threaded FDA: Sanitary Clamp Fittings FLA: Flange
Pump Connection Size *Plastic pumps are only available with flange connection
800 (3” x 3”) Diaphragm Material
Pump Body Material (wetted) T: PTFE N: BUNA (NBR)
A: Aluminum (ADC12) P: PPG H: Hytrel™ (TPEE) V: Viton® (FKM)
F: Cast Iron (S45C) S: Santoprene® (TPO) E: EPDM
S: Cast Stainless Steel (SCS14)/SS316 C: Neoprene™ (CR)
Air-Operated Air-Operated
Double Diaphragm Pumps Double Diaphragm Pumps
Flow Conditions:
TC-X800AT ST FT PT 20” (50cm) flooded suction.
WET END MATERIALS Air
Ambient temperature: 77°F (25°C)
Liquid temperature: 70-77°F (21-25°C)
Outer
Code Pump wetted parts Diaphragm Ball Valve/Valve Seat
Diaphragm Plate
Center Body
100 PSI
AC Neoprene™ Neoprene™ 70.5 SCFM
90
Discharge Head
AN BUNA BUNA
AE EPDM EPDM 75
AV AL Alloy/AL Viton
®
Viton ®
AL 60 106 SCFM
AT PTFE PTFE
45
AH Hytrel™ BUNA
141 SCFM
30
AS Santoprene® EPDM
177 SCFM
SC Neoprene™ Neoprene™
SN BUNA BUNA 35 SCFM
SE EPDM EPDM
LPM
SV Cast SS/SS316 Viton® Viton® SS316
Conditions: GPM Conditions:
ST PTFE PTFE 20” (50cm) flooded suction. Flow 20” (50cm) flooded suction.
SH Hytrel™ BUNA Ambient temperature: 77°F (25°C) Ambient temperature: 73°F (23°C)
SS Santoprene® EPDM Liquid temperature: 70-77°F (21-25°C) Liquid temperature: 64-68°F (18-20°C)
AL
FC Neoprene™ Neoprene™ TC-X800A"X"/ S"X"/ F"X" (except T) TC-X800P"X" (except T)
FN BUNA BUNA
FE EPDM EPDM 125 PSI
70.5 SCFM
FV Cast Iron Viton® Viton® SS316
FT PTFE PTFE 100 100 PSI
106 SCFM 70.5 SCFM
FH Hytrel™ BUNA 90
Discharge Head
Discharge Head
80
FS Santoprene® EPDM 75
106 SCFM
PC Neoprene™ Neoprene™ 60 60
141 SCFM
PN BUNA BUNA 141 SCFM
45
PE EPDM EPDM 40 177 SCFM
30
PV PPG Viton® Viton® PPG (SCS13*) 212 SCFM 177 SCFM
35 SCFM
15 15 35 SCFM
PT PTFE PTFE
PH Hytrel™ BUNA
LPM LPM
PS Santoprene® EPDM
GPM GPM
Flow Flow
AL Alloy Aluminum Alloy (ADC12) Pure Poly Pure Polypropylene
AL
Cast SS
Aluminum (A5056)
Cast Stainless Steel (SCS14)
PTFE
PPG
Polytetrafluoroethylene (Teflon®)
Glass Fiber Reinforced Polypropylene
MODEL NUMBER NOMENCLATURE
SS316 Stainless Steel Grade 316 Santoprene® Thermoplastic PolyOlefin (TPO)
Cast Iron Cast Iron (S45C) Hytrel™ Thermoplastic Polyester Elastomer (TPEE)
BUNA
Neoprene™
Nitrile Rubber (NBR)
Chloroprene Rubber (CR)
EPDM
* SCS13
Ethylene Propylene Diene Monomer (Nordel™)
Cast Stainless Steel (insert material)
Series TC-X 800 P T - NPT - XXXX Special options
TC-X
Viton® Fluoroelastomer (FKM) Connection Type*
NPT: Threaded FDA: Sanitary Clamp Fittings FLA: Flange
Pump Connection Size *Plastic pumps are only available with flange connection
800 (3” x 3”) Diaphragm Material
Pump Body Material (wetted) T: PTFE N: BUNA (NBR)
A: Aluminum (ADC12) P: PPG H: Hytrel™ (TPEE) V: Viton® (FKM)
F: Cast Iron (S45C) S: Santoprene® (TPO) E: EPDM
S: Cast Stainless Steel (SCS14)/SS316 C: Neoprene™ (CR)
Air-Operated
Double Diaphragm Pumps Air-Operated
Double Diaphragm Pumps
DIMENSIONS 16.4” (416 mm)
6” (153 mm) 5.4” (137 mm)
TC-X800A/F-FL 3.7” (95 mm)
FLUID Outlet
equivalent to
3” TC-X800 Series
ANSI 150 3B
DN 80 PN 10 The TC-X800 Series pumps offer excellent flow rates and a new heavy duty body
JIS 10K 80A
EXHAUST
design. The pumps can operate with variable air pressures and are suited for both start/
NPT 3/4 stop and fully continuous duty pumping applications. They can easily handle high
pressure and long discharge lines.
SPECIFICATIONS
EXHAUST
NPT 3/4
NPT ¾
41.1” (1044 mm)
1
14-100 PSI (0.1 - 0.7 MPa) 22-100 PSI (0.15 - 0.7 MPa)
Liquid Discharge Volume per cycle 230 oz (6800 mL) 108 oz (3200 mL)
FLUID Inlet
equivalent to 3" ANSI flange 150 lb
ANSI 150 3B Connection Suction x Discharge JIS 10K 80A
DN 80 PN 10
JIS 10K 80A
Weight 155.4 lbs (70.5 kg)
5.1” (129 mm)
* See Chart and Model Number nomenclature on back page for materials
Note 1: A supply air pressure of 22 PSI (0.15 MPa) or more is required to operate the pump. If the supply pressure is less than 22 PSI (0.15 MPa), the pump may not operate properly.
15.2” (387 mm) 6.3” (160 mm) 4-Ø 0.6” (14 mm) Pump Liquid Temperature Range: 32-140°F (0-60°C)
4-Ø 0.4”
(10.2mm) Ambient Temperature Range: 32-158°F (0-70°C)
26.8” (681 mm) 13.2” (336 mm)
Slurry Recommendation: 0.39" (10 mm) or less
27.8” (705 mm) 17.6” (448 mm) Viscosity Limit: Suction lift ~3000 cps (3 Pa·s) Force in ~8000 cps (8 Pa·s) (Please contact your distributor for more details)