The document provides inspection instructions for the throttle body idle speed control (ISC) valve assembly in the SFI engine control system. It describes how to check the operation of the ISC valve by connecting to it and observing its movement when the ignition is turned on. The valve should move from half open to fully closed to fully open and back to half open within 0.5 seconds. Any diagnostic trouble codes related to ISC valve malfunctions should be erased after inspection.
The document provides inspection instructions for the throttle body idle speed control (ISC) valve assembly in the SFI engine control system. It describes how to check the operation of the ISC valve by connecting to it and observing its movement when the ignition is turned on. The valve should move from half open to fully closed to fully open and back to half open within 0.5 seconds. Any diagnostic trouble codes related to ISC valve malfunctions should be erased after inspection.
The document provides inspection instructions for the throttle body idle speed control (ISC) valve assembly in the SFI engine control system. It describes how to check the operation of the ISC valve by connecting to it and observing its movement when the ignition is turned on. The valve should move from half open to fully closed to fully open and back to half open within 0.5 seconds. Any diagnostic trouble codes related to ISC valve malfunctions should be erased after inspection.
Open CONTROL VALVE ASSY NOTICE: Close It is impossible to check the resister value and the op- eration of ISC valve by itself, because the ISC valve Valve has an IC circuit inside it, which transforms the duty signal from the ECM to the derive signal. After checking, erase the DTC. Clear the DTC after inspection. HINT: When the ISC valve system has malfunctions except for its ad- herence, DTC P0505 is detected. (a) Operation inspection. (1) Connect the ISC connector to the ISC valve. Valve (2) Check the ISC valve movement when the ignition switch is turned ON. Movement: Half open → fully close → fully open → half open A50374 HINT: ISC valve moves within 0.5 second.
DTC P0011 Camshaft Position "A" - Timing Over - Advanced or System Performance (BANK 1) DTC P0012 Camshaft Position "A" - Timing Over - Retarded (Bank 1)