Professional Documents
Culture Documents
Catalogo Perless
Catalogo Perless
TUR AL LIGHTING
TURAL
Architectural Lighting
ARCHITEC
LITHONIA FL
FLUORESCENT
UORESCENT
PEERLESS
CONTENTS
Lightfoil
Lightfoil®
TURAL
Lightfoil®2 132
ARCHITECTUR
TUR
Lightfoil®3 133
ARCHITEC
Lightline ™
Lightline™ Wall Wash 134
Lightline™ Symmetric Recessed 135
Lightline™ Asymmetric 136
Lightline™ Suspended 137
Parallels
Parallels™ 138
Lightedge
Lightedge®
Lightedge® Angular 139
Lightedge® Curved 141
Lightedge® ID 143
Lightedge® Rectangular 146
Lightedge® Wall 140,142,145,147
Mirage
Mirage® 148
Lightfin
Lightfin® 149
Lightfin® Wall 150
Lightduct
Lightduct® 151
Lightduct® Wall 152
Envision
Envision® 153
Envision® Wall 155
Envision® Cove 156
LD6 157
PEERLESS
LD9 158
TUR
TURAL
Cerra® 7 160
Cerra® 10 161
AL LIGHTING
Cerra® ID 162
Cerra® Lightvent 163
Cerra® Accessories 164
Cerra® Wall 165
Cerra
Cerra® Baffle 166
Cerra® Baffle Wall 167
Cerra
Cerra® Direct 168
Cerra® Direct Accents 170
Peerlite Aero
Aero® 171
Enzo
Enzo® 172
LITHONIA FL
Prima
Prima® 173
Prima® ID 174
FLUORESCENT
HOT-5
HOT-5® Cove 175
UORESCENT
PEERLESS
® Intended Use
Lightfoil 2 The form is minimal, sculptured, tastefully refined. Cylinder, block and foil shapes merge and blend
discreetly with surrounding architecture, offering a singular visual element that complements and
accommodates. The optical design is a remarkable accomplishment. No other system delivers light
so abundantly, so smoothly, so efficiently for contemporary medium-scale environments. This is
architectural surface lighting in its most advanced state.
FL
Ordering Information Example: 4 LF2FW 2 24T5HO U2 120 GEB10 SCT L/LP C224
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity Number of lamps Nominal length Voltage Emergency options3 Lamp color Options
Specify in cross section U2 2’ EL Emergency battery pack 1
L/LP No lamp
120 GLR Fast blow fuse
number of 1 U3 3’ 277 EC Emergency circuit night-light LP830 3000°K 80+ CRI GMF Slow blow fuse
fixtures.
2 U4 4’ 347 EN Emergency battery pack in LP835 3500°K 80+ CRI FEP Flat endplate
U5 5’ the night-light circuit1 (standard) (no cylinder)
LP841 4100°K 80+ CRI
NOTES:
1 54T5HO only.
2 Not available in 2’, 3’ or 5’ T5HO.
3 EL, EN and EC only available with SCT.
A - FOIL
B - LUMINAIRE
FL
FLOODLIGHTING
OODLIGHTING
Lightfoil®3
Intended Use
The form is minimal, sculptured, tastefully refined. Cylinder, block and foil shapes merge and blend
discreetly with surrounding architecture, offering a singular visual element that complements and
accommodates. The optical design is a remarkable accomplishment. No other system delivers light
so abundantly, so smoothly, so efficiently for contemporary large-scale environments. This is
architectural surface lighting in its most advanced state.
Construction thermoplastic core material. Finish volt. For special circuiting, consult
Housing & cylinder AA 6063 T6 Housing and cylinders powder factory.
extruded aluminum. Foil is
Reflectors coated. Foil available in bronze,
Reynobond® (Alcoa) composite, Die-formed reflectors combine silver or white finishes.
Listings
consisting of two sheets of semi-specular aluminum and baked UL Listed to US and Canadian safety
corrosion-resistant aluminum white enamel. Electrical standards (dry location only).
laminated to an extruded Specify 120 volt, 277 volt or 347
Ordering Information Example: 4 LF3FW 3 24T5HO U2 120 GEB10 SCT L/LP C224
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity Number of lamps Nominal length Voltage Emergency options3 Lamp color Options
Specify in cross section U2 2’ EL Emergency battery pack 1
L/LP No lamp
120 GLR Fast blow fuse
number of 3 U3 3’ 277 EC Emergency circuit night-light LP830 3000°K 80+ CRI GMF Slow blow fuse
fixtures.
4 U4 4’ 347 EN Emergency battery pack in LP835 3500°K 80+ CRI FEP Flat endplate
U5 5’ the night-light circuit1 (standard) (no cylinder)
LP841 4100°K 80+ CRI
NOTES:
1 54T5HO only.
2 Not available in 2’, 3’ or 5’ T5HO.
3 EL, EN and EC only available with SCT.
A - FOIL
B - LUMINAIRE
LITHONIA FL
LUMINAIRE CROSS SECTIONS
A B
LF2FW 24W and LF3FW 24W 35" 43"
LF2FW 39W and LF3FW 39W 45" 53"
LF2FW 54W and LF3FW 54W 57" 65"
LF2FW 80W and LF3FW 80W 69" 76"
FLUORESCENT
™ Intended Use
Lightline The Lightline™ Wall Wash Series brings HOT-5® technology to a recessed environment. Built with a
precise specular, asymmetric, aluminum reflector, the Lightline™ Wall Wash luminaire tames the
powerful T5HO lamp and the result is a wall bathed with soft, comfortable light.
Wall Wash
Construction with high-gloss baked enamel. Electrical lengths available.
Housing is formed from painted cold- Specify 120 volt , 277 volt or 347
rolled steel. Five-stage iron-
Reflectors volt. For special circuiting, consult
Listings
phosphate pretreatment ensures Die-formed reflector with baked factory. UL Listed to US and Canadian safety
superior paint adhesion and rust white enamel finish. Nominal standards.
resistance. Painted parts finished reflectance 90%. Black metal Fixture Size
diffuser with round holes. Nominal 2½” aperture. 2’ and 4’
Ceiling type Lamp type Nominal length Ballast type Lamp color
G Lay-in grid 24T5HO 24W 2’ T5HO U2 2’ GEB10 10% THD ballast L/LP No lamp
54T5HO 54W 4’ T5HO U4 4’ Dimming ballasts LP830 3000°K 80+ CRI
28T5 28W 4’ T5 ADEZ Advance Mark 101 LP835 3500°K 80+ CRI
14T5 14W 2’ T5 ADZT Advance Mark 71 LP841 4100°K 80+ CRI
ECO10 Lutron ECO 10
DHML Lutron Hi-Lume1
OSDIM Osram 0-10V1
RECESSED
Intended Use
Seamlessly sleek, delicate and discrete. Delight in an aesthetically refined, recessed luminaire. HOT-
5® technology harmonized with the luminaire’s thread-like aperture delivers unobtrusive, balanced
Lightline™
downlight. The Lightline™ Symmetric Recessed luminaire is part of the Lightline family of products
designed around ultra-slim T5HO lamps. The Lightline™ Series brings a discrete, narrow aesthetic to
a variety of architecture.
Symmetric
Construction
Housing is formed from one-piece
painted cold-rolled steel. Four-stage
Reflectors
Die-formed reflector with baked
white enamel finish. Nominal
Electrical
Specify 120 volt , 277 volt or 3472
volt. For special circuiting, consult
Listing
UL Listed to US and Canadian safety
standards.
Recessed
iron-phosphate pretreatment reflectance 90%. factory.
ensures superior paint adhesion and
rust resistance. Painted parts are Shielding Fixture Size
finished with low-gloss baked Arc-shaped, parabolic low iridescent Nominal 2½” aperture. 2’ and 4’
enamel. semi-specular aluminum louver. lengths available.
Ceiling type Lamp type Nominal length Ballast type Lamp color
G Lay-in grid 24T5HO 24W 2’ T5HO U2 2’ GEB10 10% THD ballast L/LP No lamp
54T5HO 54W 4’ T5HO U4 4’ Dimming ballasts1 LP830 3000°K 80+ CRI
14T5 14W 2’ T5 ADEZ Advance Mark 10 LP835 3500°K 80+ CRI
28T5 28W 4’ T5 ADZT Advance Mark 7 LP841 4100°K 80+ CRI
ECO10 Lutron ECO 10
DMHL Lutron Hi-Lume (DIM1)
OSDIM Osram O-10V
LITHONIA FL
LUMINAIRE CROSS SECTIONS
FLUORESCENT
LSR9 – 1 T5/T5HO lamp
UORESCENT
PEERLESS
™ Intended Use
Lightline Seamlessly sleek, delicate and discrete. Delight in an aesthetically refined, recessed asymmetric
luminaire. HOT-5® technology harmonized with Lightline’s thread-like aperture delivers unobtrusive,
balanced asymmetric light. The Lightline™ Asymmetric Recessed Series is part of the Lightline™
Asymmetric family of products designed around ultra-slim T5HO lamps. Lightline luminaires bring a discrete,
narrow aesthetic to a variety of architecture.
Available Summer 2006
Construction Reflectors Electrical Listings
Housing is formed from one-piece Die-formed reflector with baked Specify 120 volt , 277 volt or 3472 UL Listed to US and Canadian safety
painted cold-rolled steel. Four- white enamel finish. Nominal volt. For special circuiting, consult standards.
stage iron-phosphate pretreatment reflectance 90%. factory.
ensures superior paint adhesion and
rust resistance. Painted parts are Shielding Fixture Size
finished with low-gloss baked Arc-shaped, parabolic low iridescent Nominal 2½” aperture. 2’ and 4’
enamel. semi-specular aluminum louver. lengths available.
Ceiling type Lamp type Nominal length Ballast type Lamp color
G Lay-in grid 24T5HO 24W 2’ T5HO U2 2’ GEB10 10% THD ballast L/LP No lamp
54T5HO 54W 4’ T5HO U4 4’ Dimming ballasts2 LP830 3000°K 80+ CRI
14T5 14W 2’ T5 ADEZ Advance Mark 10 LP835 3500°K 80+ CRI
28T5 28W 4’ T5 ADZT Advance Mark 7 LP841 4100°K 80+ CRI
ECO10 Lutron ECO 10
OSDIM Osram O-10V
DMHL Lutron Hi-Lume
NOTES: (DIM1) Accessories (Order separately)
1 Only available with 54T5HO. DHSGS2 Gyp-board flange kit 2’
2 Only available with 28T5 and 54T5HO.
DHSGS4 Gyp-board flange kit 4’
SUSPENDED
Intended Use
The LightlineTM Series satisfies all requirements for high-quality indirect light distribution, continuous
lamping, low-brightness downlight components and powerful lumen packages. At the same time, it
Lightline™
offers minimal fixture widths and profiles, layout and configuration flexibility, and elegant mechanical
detailing. Whether straight runs or rectangles, nested patterns or ladder configurations, the
LightlineTM system allows an unexpected level of design freedom.
Suspended
Finish rectangular channel. Die-cast end Fixture Length volt. Pre-wired with prescribed
Standard colors are satin anodized plate mechanically attached with no Specify nominal fixture/row length circuits as specified. For special
aluminum, standard white (low exposed fasteners. in feet. For long runs, advise circuiting, consult factory.
gloss), white white (gloss) and white maximum extrusion length if 12’ is
white (low gloss).
Reflectors not acceptable. 4’, 8’ or 12’ nominal
Listings
Die-formed reflectors combine sections used to create runs. UL Listed to US and Canandian
Contruction hammertone specular aluminum and safety standards.
Housing AA 6063 T6 extruded baked white enamel (86% nominal Electrical
aluminum forming a 2-3/4”x 2-1/2” reflectance). Specify 120 volt, 277 volt or 347
Ordering Information Example: 4 LL1 010000 T8 24FT R12 120 GEB SCT LP730 F1/24 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity Lamp type Voltage Emergency type Switching Mounting Feed/overall Finish4
Specify (optional) suspension C100
T5 120 SCT Single (blank) Wall Satin anodized
number of HOT5 EL Emergency circuit mount 12 12” aluminum
277
fixtures/ battery pack
T8 347 3 F1/ T-bar 15 15” C200Standard white
rows. EC Emergency ceiling 18 18” (low gloss)
circuit F2/ Hard 21 21” C005Soft white (low
Fixture Fixture/row length2 Ballast EN Emergency ceiling 24 24” gloss)
(Specify nominal fixture/row battery pack horizontal XX XX” C032
White white (gloss)
LL1 2¾ X 2½ length in feet.)
GEB T8 electronic ballast
with night- j-box C041White white (low
rectangular GEB10 T5/HOT5 electronic
FT light gloss)
LL1W 2¾ X 2½ ballast. T8 10%
rectangular THD electronic C099 Custom color
wall mount ballast. (consult factory)
LITHONIA FL
NOTES: LUMINAIRE CROSS SECTIONS
1 T5/T5HO special configurations only. Con-
tact factory.
2 For long runs, advise maximum extrusion
length if 12’ is not acceptable. 4’, 8’ or 12’
nominal sections used to create runs.
3 Only available in T8 and HOT5.
4 To match custom color chip, specify C099.
FLUORESCENT
™ Intended Use
Parallels A pure expression of light. No cables, no wiring, no housing, no integral ballasts. Stripped of such
conventional trappings, the latest design innovation from Peerless offers a striking departure from
the monotonous mainstream.
The lamps, powered through elegant anodized aluminum stems, are wrapped in parallel luminous
elements providing a slim and sophisticated form harmonious with contemporary environments.
Construction Reflectors switching. Step switching option Fixtures mount to 4’ grid. Overall,
Extruded translucent white acrylic Die-formed specular reflectors. allows system to be switched to fixture lengths are 4’-9” and 5’-9”
diffuser with opaque painted ends. 50% power for compliance with respectively.
AA 6063 T6 extruded aluminum Electrical common energy codes while
fixed length yokes. Formed and Specify 120 volt , 277 volt or 347 maintaining fixture appearance. Listings
painted, cold-rolled steel recessed volt. Prewired with prescribed UL Listed to US and Canadian safety
housing. circuits and Molex quick connectors. Fixture Length standards.
Available “S” option for step Lengths available in 4’ and 5’.
Quantity Fixture Number of lamps Nominal length Voltage Emergency options Switching Options
in cross section
Specify PLM9 Recessed/ U 4 4’ 120 EL Emergency SCT CP Chicago plenum
number of pendant 2 U 5 5’ 277 battery pack
fixtures. mount 3471,2
SUSPENDED
Intended Use
Lightedge® Angular luminaires are beautifully proportioned and exquisitely detailed. Like elegant
metal sculptures with precise reveals and a hint of luminous color, they appear to float in space,
Lightedge®
emitting a soft indirect light across the ceiling and into the environment below. The look is leading
edge and completely unique. Angular
Finish Reflectors volt. For special circuiting, consult 4’ and 8’ sections can be joined to
Satin anodized standard; custom Die-formed reflectors with baked factory. form longer-length fixtures. EGAM
colors available. white enamel finish (nominal available in 12’.
reflectance 90%). T5HO/T5 with
Fixture Length
Construction specular aluminum. 4’ and 8’ lengths in a single section Listings
Housing and endcap AA 6063 T6 for suspension spacing of 4’ and 8.’ UL Listed to US and Canadian safety
extruded aluminum. Electrical For total fixture length, add 4” for standards.
Specify 120 volt, 277 volt or 347 each end-cap. Using internal joiners,
Ordering Information Example: 4 EGSAM1 2 54T5HO 40FT R8 120 GEB10 2SE EL SCT LP835 F1/24 C100
Quantity Lamp type Voltage Emergency type Mounting type Feed/overall Finish
(optional)4 suspension
Specify 54T5HO 54W 4’ 120 F1/ T-bar ceiling C100 Satin anodized
number of T5HO 277 EL Emergency battery F2/ Hard ceiling 12 12” finish (standard)
fixtures. pack 15 15”
28T5 28W 4’ T5 347 3 horizontal j- C099 Custom color
32 32W 4’ T8 EC Emergency circuit box 18 18” (consult factory)
EN Emergency battery F4A/ Grid ceiling 21 21” C200 Peerless
pack w/ night-light IDS 15/16” 24 24” standard white
circuit F4B/ Grid ceiling XX XX” (low gloss)
Nominal length IDS 9/16” C005 Soft white (low
Fixture Ballast type Switching
(must be in 4’ increments) F4C/ Grid ceiling gloss)
EGSAM1 Shallow GEB10 10% THD SCT Single circuit IDS screw slot C032 White white
profile, FT ballast DCT Dual circuit (gloss)
indirect1 GEB T8 electronic C041 White white
EGSAM2 Shallow ballast (low gloss)
profile,
indirect/ Number of lamps Maximum section Number of Emergency sections Lamp color Options
open1 in cross section length (sections per run) (optional)
L/LP No lamp ACG Adjustable cable grippers
EGAM1 Indirect 12 R4 4’ section 1SE 1 section T8 GLR Fast blow fuse
EGAM2 Indirect/ 2 R8 8’ section 2SE 2 sections LP730 3000°K 70+ CRI GMF Slow blow fuse
open 32 R12 12’ section XSE X sections LP735 3500°K 70+ CRI ELH EM through-wire harness
(EGAM only) LP741 4100°K 70+ CRI ELS EM through-wire harness
NOTES: T5/T5HO with single feed
1 Max. R8 LP830 3000°K 80+ CRI CMG White cord manager
2 One and 3 lamps not available in T8. LP835 3500°K 80+ CRI APF Alternate power feed
3 T8 and T5HO only. LP841 4100°K 80+ CRI (F4X mounting only)
4 EL, EN and EC not available with DCT in 4’ CMG Cord manager
LITHONIA FL
sections. DV Dust cover
LUMINAIRE CROSS SECTIONS
EGAM1 and EGAM2 – EGAM1 and EGAM2 – EGAM1 and EGAM2 – EGAM1 and EGAM2 –
FLUORESCENT
®
Lightedge Intended Use
Lightedge® Angular Wall luminaires are beautifully proportioned and exquisitely detailed. Like
elegant metal sculptures with precise reveals and a hint of luminous color, they appear to float in
space, emitting a soft indirect light across the ceiling and into the environment below. The look is
Angular Wall leading edge and completely unique.
Construction reflectance 90%). Prismatic acrylic volt. For special circuiting, consult sections can be joined to form
Housing and endcap AA 6063 T6 kicker lens on 1 lamp product. factory. longer-length fixtures.
extruded aluminum forming a 71/2”
x 21/8” angular channel.
Finish Fixture Length Listings
Satin anodized standard; custom 4’, 8’ and 12’ lengths in a single UL Listed to US and Canadian safety
Reflectors colors available. section for suspension spacing of 4’, standards.
Die-formed reflectors combine 8’ and 12.’ For total fixture length,
hammertone specular aluminum
Electrical add 4” for each end-cap. Using
and baked white enamel (nominal Specify 120 volt, 277 volt or 347 internal joiners, 4’, 8’ and 12’
Ordering Information Example: 4 EGAW1 1 54T5HO 40FTN R12 120 GEB10 2SE EL SCT LP835 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Number of lamps Maximum section length Number of emergency sections Lamp color Options
in cross section (sections per run) (optional)
R4 4’ section L/LP No lamp GLR Fast blow fuse
1 R8 8’ section (blank) No emergency T8 GMF Slow blow fuse
21 R12 12’ section 1SE 1 section LP730 3000°K 70+ CRI ELH EM through-wire harness
2SE 2 sections LP735 3500°K 70+ CRI ELS EM through-wire harness
XSE X sections LP741 4100°K 70+ CRI with wingle feed
NOTES: DV Dust cover
T5/T5HO
1 Two lamp not available in T8.
LP830 3000°K 80+ CRI
2 T8 and T5HO only.
LP835 3500°K 80+ CRI
3 EL, EN and EC not available with DCT in 4’ sections.
LP841 4100°K 80+ CRI
SUSPENDED
Intended Use
Lightedge® Curved luminaires are beautifully proportioned and exquisitely detailed. Like elegant
metal sculptures with precise reveals and a hint of luminous color, they appear to float in space,
Lightedge®
emitting a soft indirect light across the ceiling and into the environment below. The look is leading
edge and completely unique.
Curved
Construction specular aluminum. volt. For special circuiting, consult 4’ and 8’ sections can be joined to
Housing and endcap AA 6063 T6 factory. form longer-length fixtures. EGCM
extruded aluminum.
Finish available 12’.
Satin anodized standard; custom Fixture Length
Reflectors colors available. 4’ and 8’ lengths in a single section Listings
Die-formed reflectors with baked for exact suspension spacing of 4’ and UL Listed to US and Canadian safety
white enamel finish (nominal
Electrical 8.’ For total fixture length add 4” for standards.
reflectance 90%). T5HO/T5 with Specify 120 volt, 277 volt or 347 each end-cap. Using internal joiners,
Ordering Information Example: 4 EGSCM1 2 54T5HO 40FT R8 120 GEB10 2SE EL SCT LP835 F1/24 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity Lamp type Voltage Emergency type Mounting type Feed/overall Finish
54T5HO 54W 4’ (optional)4 suspension
Specify 120 F1/ T-bar ceiling C100 Satin anodized
number of T5HO 277 EL Emergency F2/ Hard ceiling 12 12” finish (standard)
fixtures. 28T5 28W 4’ T5 15 15”
347 3 battery pack horizontal C099 Custom color
32 32W 4’ T8 EC Emergency circuit F4A/ Grid ceiling 18 18” (consult factory)
T8 32W 4’ T8 EN Emergency IDS 15/16” 21 21” C200 Peerless
battery pack w/ F4B/ Grid ceiling 24 24” standard white
night-light circuit IDS 9/16” XX XX” (low gloss)
F4C/ Grid ceiling C005 Soft white (low
Fixture Nominal row length Ballast type Switching IDS screw slot gloss)
(must be in 4’ increments) C032 White white
EGSCM1 Shallow GEB10 10% THD ballast SCT Single circuit
profile, FT GEB Electronic DCT Dual circuit (gloss)
indirect1 ballast (T8 only) C041 White white
EGSCM2 Shallow (low gloss)
profile,
indirect/
Number of lamps Maximum section length Number of emergency sections Lamp color Options
open1
in cross section R4 4’ section (sections per run) (optional)
EGCM1 Indirect L/LP No lamp ACG Adjustable cable grippers
EGCM2 Indirect/ 12 R8 8’ section 1SE 1 section T8 GLR Fast blow fuse
open 2 R12 12’ section 2SE 2 sections LP730 3000°K 70+ CRI GMF Slow blow fuse
32 (EGCM only) XSE X sections LP735 3500°K 70+ CRI ELH EM through-wire harness
LP741 4100°K 70+ CRI ELS EM through-wire harness
NOTES: T5/T5HO with single feed
1 Max. R8 LP830 3000°K 80+ CRI CMG White cord manager
2 One and 3 lamp not available in T8. LP835 3500°K 80+ CRI APF Alternate power feed
3 T8 and T5HO only. LP841 4100°K 80+ CRI (F4X mounting only)
4 EL, EN and EC not available with DCT in 4’ sections. DV Dust cover
CMG Cord manager
LITHONIA FL
LUMINAIRE CROSS SECTIONS
EGCM1 and EGCM2 – 1 T5/T5HO lamp EGCM1 and EGCM2 – 2 T5/T5HO lamps
FLUORESCENT
UORESCENT
PEERLESS
®
Lightedge Intended Use
Lightedge® Curved luminaires are beautifully proportioned and exquisitely detailed. Like elegant
metal sculptures with precise reveals and a hint of luminous color, they appear to float in space,
emitting a soft indirect light across the ceiling and into the environment below. The look is leading
Curved Wall edge and completely unique.
Construction reflectance 90%). Prismatic acrylic volt. For special circuiting, consult sections can be joined to form
Housing and endcaps AA 6063 T6 kicker lens on 1 lamp product. factory. longer-length fixtures.
extruded aluminum forming a 7½”
x 2¼” curvilinear channel.
Finish Fixture Length Listings
Satin anodized standard; custom 4’, 8’ and 12’ lengths in a single UL Listed to US and Canadian safety
Reflectors colors available. section for suspension spacing of 4’, standards.
Die-formed reflectors combine 8’ and 12.’ For total fixture length,
hammertone specular aluminum and
Electrical add 4” for each end-cap. Using
baked white enamel (nominal Specify 120 volt, 277 volt or 347 internal joiners, 4’, 8’ and 12’
Ordering Information Example: 4 EGCW1 1 54T5HO 40FTN R12 120 GEB10 2SE EL SCT LP835 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity Lamp type Maximum section Voltage Number of emergency Switching Finish
length sections (sections per run)
Specify 54T5HO 54W 4’ 120 SCT Single C100 Satin anodized finish
(optional)
number of T5HO R4 4’ section 277 circuit (standard)
fixtures. 28T5 28W 4’ T5 R8 8’ section 347 2 (blank) No emergency DCT Dual circuit C099 Custom color (consult
32 32W 4’ T8 R12 12’ section 1SE 1 section factory)
2SE 2 sections C200 Peerless standard white
XSE X sections (low gloss)
C005 Soft white (low gloss)
C032 White white (gloss)
C041 White white (low gloss)
Fixture Number of lamps Nominal row length Ballast type Emergency type Lamp color Options
in cross section (must be in 4’ increments) (optional)3
EGCW1 Indirect GEB10 10% THD ballast L/LP No lamp GLR Fast blow guse
1 FTN for T5HO/T5 EL Emergency
EGCW2 Indirect/ GEB Electronic ballast T8 GMF Slow blow fuse
open 21 FT (T8 only) battery pack LP730 3000K° 70+ CRI ELH EM through-wire harness
EC Emergency circuit LP735 3500K° 70+ CRI ELS EM through-wire harness
EN Emergency LP741 4100K° 70+ CRI with single feed
battery pack w/ DV Dust cover
T5/T5HO
NOTES: night-light circuit
1 Two lamp not available in T8.
LP830 3000°K 80+ CRI
2 T8 and T5HO only. LP835 3500°K 80+ CRI
3 EL, EN and EC not available with DCT in 4’ sections. LP841 4100°K 80+ CRI
EGCW1 and EGCW2 – 1 T5/T5HO lamp EGCW1 and EGCW2 – 2 T5/T5HO lamps
SUSPENDED
Intended Use
Lightedge® Angular ID luminaires are beautifully proportioned and exquisitely detailed. Like elegant
metal sculptures with precise reveals and a hint of luminous color, they appear to float in space,
Lightedge®
emitting a soft indirect light across the ceiling and into the environment below. The look is leading
edge and completely unique.
Angular ID
Construction reflectance 90%). Electrical For total fixture length, add 4” for
Housing and endcap AA 6063 T6 Specify 120 volt, 277 volt or 347 each end-cap. Using internal joiners,
extruded aluminum forming a 8” x
Finish volt. For special circuiting, consult 4’ and 8’ sections can be joined to
1¾” angular channel. Satin anodized standard; custom factory. form longer-length fixtures.
colors available.
Reflectors Fixture Length Listings
Die-formed reflectors combine
Shielding 4’ and 8’ lengths in a single section UL Listed to US and Candadian
hammertone specular aluminum and Parabolic semi-specular aluminum for suspension spacing of 4’ and 8’. safety standards.
baked white enamel (nominal baffles.
Ordering Information Example: 4 EGSAM4 2 54T5HO 40FT R8 120 GEB10 2SE EL SCT LP835 F1/24 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
LITHONIA FL
LUMINAIRE CROSS SECTIONS
®
Lightedge Intended Use
Lightedge® Curved I/D luminaires are beautifully proportioned and exquisitely detailed. Like elegant
metal sculptures with precise reveals and a hint of luminous color, they appear to float in space,
emitting a soft indirect light across the ceiling and into the environment below. The look is leading
Curved ID edge and completely unique.
Ordering Information Example: 4 EGSCM4 2 54T5HO 40FT R8 120 GEB10 2SE EL SCT LP835 F1/24 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
WALL MOUNT
Intended Use
Lightedge® wall luminaires are beautifully proportioned and exquisitely detailed. Like elegant metal
sculptures with precise reveals and a hint of luminous color, they appear to float in space, emitting a
Lightedge® Curved
soft indirect light across the ceiling and into the environment below. The look is leading edge and
completely unique.
& Angular Wall ID
Construction reflectance 90%). Prismatic acrylic Electrical internal joiners, 4’ , 8’ and 12’
Housing and endcap AA 6063 T6 kicker lens on 1 lamp product. Specify 120 volt, 277 volt, or 347 sections can be joined to form
extruded aluminum forming a 71/2” x volt. For special circuiting, consult longer-length fixtures.
21/8” angular channel.
Shielding factory.
Parabolic semi-specular aluminum Listings
Reflectors baffles with opal diffuser. Fixture Length UL Listed to US and Canadian safety
Die-formed reflectors combine 4’, 8’ and 12’ lengths in a single standards.
hammertone specular aluminum and
Finish section for suspension spacing of 4’ ,
baked white enamel (nominal Satin anodized standard; custom 8’ and 12’. For total fixture length,
colors available. add 4” for each end-cap. Using
Ordering Information Example: 4 EGAW4 1 54T5HO 36FTN R12 120 GEB10 2SE EL SCT LP835 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
NOTES:
1 T5HO only.
2 EL, EN and EC not available with DCT in 4’ sections.
LITHONIA FL
LUMINAIRE CROSS SECTIONS
FLUORESCENT
®
Lightedge Intended Use
Lightedge® Rectangular luminaires are beautifully proportioned and exquisitely detailed. Like
elegant metal sculptures with precise reveals and a lustrous anodized finish, they appear to float
effortlessly in space. This highly engineered system also softens the direct light component in a way
Rectangular never before accomplished – offering unmatched refinement and visual comfort. Pendant and wall
fixtures provide integrated design options and a wide range of configuration possibilities.
Construction reflectance 90%) and specular Electrical For total fixture length, add 4” for
Housing and endcap AA 6063 T6 aluminum side reflector. Specify 120 volt, 277 volt or 347 each end-cap. Using internal joiners,
extruded aluminum forming an 81/8” volt. For special circuiting, consult 4’ and 8’ sections can be joined to
x 11/2” rectangular channel. Finish factory. form longer-length fixtures.
Satin anodized standard; custom
Reflectors colors available. Fixture Length Listings
Die-formed reflectors with baked 4’ and 8’ lengths in a single section UL Listed to US and Canadian safety
white enamel finish (nominal for suspension spacing of 4’ and 8.’ standards.
Ordering Information Example: 4 EGRM9 2 54T5HO 40FT R8 120 GEB10 2SE EL SCT LP835 F1/24 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
WALL MOUNT
Intended Use
Lightedge® Rectangular luminaires are beautifully proportioned and exquisitely detailed. Like
elegant metal sculptures with precise reveals and a lustrous anodized finish, they appear to float
Lightedge®
effortlessly in space. This highly engineered system also softens the direct light component in a way
never before accomplished – offering unmatched refinement and visual comfort. Pendant and wall
fixtures provide integrated design options and offer a wide range of configuration possibilities.
Rectangular Wall
Construction Finish Fixture Length Listings
Housing and endcap AA 6063 T6 Satin anodized standard; custom 4’ , 8’ and12’ lengths in a single UL Listed to US and Canadian safety
extruded aluminum forming a 7½” colors available. section for suspension spacing of 4’, standards.
x 1½” rectangular channel. 8’ and 12.’ For total fixture length,
Electrical add 4” for each end-cap. Using
Reflectors Specify 120 volt, 277 volt or 347 internal joiners, 4’, 8’ and 12’
Die-formed reflectors combine volt. For special circuiting, consult sections can be joined to form
hammertone specular aluminum factory. longer-length fixtures.
with baked white enamel finish
(nominal reflectance 90%).
Ordering Information Example: 4 EGRW9 1 54T5HO 40FTN R12 120 GEB10 2SE EL SCT LP835 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
® Intended Use
Mirage Consider the Mirage® luminaire – its multiple contours, lines and textures, its luminous baffle edges,
its high-quality aluminum housing in a choice of finishes. This is modular, high-performance lighting
in a most appealing, high-design package. Patented Softshine® optical systems with T5 high-output
or T8 lamping options meet every possible requirement for light level and fixture spacing.
Ordering Information Example: 4 MRM4 1 54T5HO 40FT R12 120 GEB10 2SE EL SCT LP835 F1/24 C005
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
NOTES:
1 Maximum # of emergency sections per run should
not exceed number of fixture sections, minus one. For
additional sections, consult factory.
MRM4 – 1 T5HO lamp MRM4 – 1 T8 lamp 2 EC and EL not available concurrently. EL and EC not
available with DCT in 4' sections. Separate feed re-
quired.
PEERLESS
SUSPENDED
Intended Use
The tasteful, angular shape of the Diminutive Lightfin® luminaire is trimmed to a mere 6" x 2" –
accommodating the new technology in a housing that virtually disappears within the space. Specify it
Lightfin®
as a totally indirect solution or with slot patterned bottoms to add a hint of brightness below. This
versatile, elegantly-thin fixture serves beautifully in even the most critical visual environments, and
is uniquely appropriate for low-ceiling applications.
Ordering Information Example: 4 LFM1 1 54T5HO 40FT R12 120 GEB10 2SE EL SCT LP835 F1/24 C005
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
LITHONIA FL
3 EC and EL not available concurrently. EL and EC not
available with DCT in 4’ sections. Separate feed re- LUMINAIRE CROSS SECTIONS
quired.
FLUORESCENT
LFM1 – 1 T5/T5HO lamp LFM1 – 2 T5/T5HO lamps LFM1 – 3 T5/T5HO lamps
UORESCENT
PEERLESS
® Intended Use
Lightfin Lightfin® Wall Mounted fixtures extend the diminutive look throughout a facility, projecting soft,
uniform light on the wall as well as above and across the ceiling in corridors, small offices and
general use areas.
Wall
Finish 21/16" angular channel. Die-cast end Fixture Length wired with prescribed circuits as
Standard colors are satin anodized plate mechanically attached with no Specify nominal fixture/row length specified. For special circuiting,
aluminum, standard white (low exposed fasteners. in feet. For long runs, advise consult factory. 3500°K T5 high-
gloss), white white (gloss) and white maximum extrusion length if 12’ is output lamps are included.
white (low gloss).
Reflectors not acceptable. 4’, 8’ or 12’ nominal
Die-formed, baked white reflectors sections used to create runs.
Listings
Construction (86% nominal reflectance), including UL listed to US and Canandian safety
Housing AA 6063 T6 extruded micro-prismatic, 100% virgin acrylic Electrical standards.
aluminum up to 24' in one specular/diffusing optical lens. Specify 120 volt or 277 volt. Pre-
uninterrupted section forming a 7" x
Ordering Information Example: 4 LFDW 010003 HOT5 40FT R12 120 GEB10 LP835 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Catalog number Maximum section length Number of emergency sections Lamp color
O10003 Indirect 1 lamp R2 2’ section 1 SE 1 section L/LP No lamp
R3 3’ section 2 SE 2 sections LP830 3000°K, 80+ CRI
R4 4’ section X SE X sections LP835 3500°K, 80+ CRI
R8 8’ section LP841 4100°K, 80+ CRI
R12 12’ section
NOTES:
1 For long runs, advise minimum extrusion length if 12' is not acceptable.
4’, 8’ or 12’ nominal sections used to create runs.
2 To match custom color chip, specify C099. If unknown, specify XXX.
LUMINAIRE CROSS SECTIONS
SUSPENDED
Lightduct®
Intended Use
Lightduct® Series makes the most of the T5 high-output fixture technology – nearly doubling the
lumen output of a T8 fixture. These luminaires offer soft, even, high-quality light for today’s multi-
task workplaces while reducing initial investment and life-cycle costs.
Construction baked white enamel (nominal with UL listed. For special circuiting, Using internal joiners, 4’, 8’ and 12’
Housing AA 6063 T6 extruded reflectance 86%). consult factory. T5 high-output sections can be joined to form
aluminum forming a 61/2" x 21/8" lamps are included. longer-length fixtures.
rounded channel. Die-cast end plate
Finish
attaches with no exposed fasteners. Satin anodized or white paint Fixture Length Listings
standard; custom colors available. 4’, 8, and 12’ lengths in a single UL Listed to US and Canadian safety
Reflectors section for exact suspension spacing standards.
Die-formed reflectors combine
Electrical of 4’, 8’ and 12’. For total fixture
hammertone specular aluminum and Specify 120 volt or 277 volt. Pre- length add 51/2” for each end-cap.
wired with prescribed circuits and
Ordering Information Example: 4 LDM1 1 54T5HO 40FT R12 120 GEB10 2SE EL SCT LP835 F1/24 C005
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Number of lamps Maximum section length Number of emergency sections Lamp color Options
in cross section (sections per run) (optional)1
R4 4’ section L/LP No lamp ACG Adjustable cable grippers
1 R8 8’ section 1SE 1 section LP830 3000°K 80+ CRI GLR Fast blow fuse
2 R12 12’ section 2SE 2 sections LP835 3500°K 80+ CRI GMF Slow blow fuse
XSE X sections LP841 4100°K 80+ CRI CMG Cord manager
3
NOTES:
1 Maximum number of emergency sections per run equals number of
fixture sections, minus one. For additional sections, consult factory.
LITHONIA FL
2 EC and EL not available concurrently. EL and EC not available with DCT
in 4’ sections. Separate feed required. LUMINAIRE CROSS SECTIONS
FLUORESCENT
® Intended Use
Lightduct Wall Lightduct® Wall Mounted fixtures extend the diminutive look throughout a facility, projecting soft,
uniform light on the wall and above and across the ceiling in corridors, small offices, and general use
areas.
This unique lighting product makes the most of T5 high-output technology. A single-lamp system
projects as much light as 2-lamp T8 conventional fixtures.
Finish channel. Die-cast end plate Fixture Length wired with prescribed circuits as
Standard colors are satin anodized mechanically attached with no Specify nominal fixture/row length specified. For special circuiting,
aluminum, standard white (low exposed fasteners. in feet. For long runs, advise consult factory. 3500K T5 high-
gloss), white white (gloss) and maximum extrusion length if 12’ is output lamps are included.
white white (low gloss).
Reflectors not acceptable. 4’, 8’ or 12’ nominal
Die-formed, baked white reflectors sections used to create runs. Listings
Construction (86% nominal reflectance), including UL listed to US and Canandian safety
Housing AA 6063 T6 extruded micro-prismatic, 100% virgin acrylic Electrical standards.
aluminum forming a 7" x 2" rounded specular/diffusing optical lens. Specify 120 volt or 277 volt. Pre-
Ordering Information Example: 4 LDDW 010003 T5 40FT R12 277 GEB10 LP835 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Catalog number Maximum section length Number of emergency sections Lamp color
O10003 Indirect 1 lamp R2 2’ section 1 SE 1 section L/LP No lamp
R3 3’ section 2 SE 2 sections LP830 3000°K, 80+ CRI
R4 4’ section X SE X sections LP835 3500°K, 80+ CRI
R8 8’ section LP841 4100°K, 80+ CRI
R12 12’ section
LDDW – 1 lamp
PEERLESS
SUSPENDED
Intended Use
The Envision® Series delivers exceptional performance at an affordable price. The sophisticated
indirect lighting optics can meet stringent IES standards for ceiling uniformity, providing soft, even
Envision®
illumination virtually free of glare and harsh shadows.
Construction baked white enamel (nominal volt. Pre-wired with prescribed internal joiners, 4’, 8’ and 12’
Housing AA 6063 T6 extruded reflectance 86%). circuits and are UL listed. For special sections can be joined to form
aluminum forming a 8" x 3" rounded circuiting, consult factory. longer-length fixtures.
channel. Die-cast end plate attaches
Finish
with no exposed fasteners. Satin anodized or white paint Fixture Length Listings
standard; custom colors available. 4’, 8’, and 12’ lengths in a single UL Listed to US and Canadian safety
Reflectors section for suspension spacing of 4’, standards.
Die-formed reflectors combine
Electrical 8’, and 12’. For total fixture length,
hammertone specular aluminum and Specify 120 volt, 277 volt or 347 add 1/2” for each end-cap. Using
Ordering Information Example: 4 ENM1 1 32 40FT R12 120 GEB 2SE EL SCT F1/24 C005
Quantity Lamp type Maximum section Number of emergency Mounting type Feed/overall
length sections(sections per suspension Options
Specify 32 F1/ T-bar ceiling
number of run) (optional)1 ACG Adjustable cable
R4 4’ section F2/ Hard ceiling 12 12”
fixtures. 1SE 1 section grippers
R8 8’ section horizontal j-box 15 15”
2SE 2 sections GLR Fast blow fuse
R12 12’ section 18 18”
XSE X sections GMF Slow blow fuse
21 21”
DU Dust cover
24 24”
RIF Radio interference
XX XX”
filter
Fixture Nominal row length Voltage Emergency type CMG Cord manager
(must be in 4’ (optional)2
ENM1 Indirect increments) 120
ENM2 Indirect/ 277 EL Emergency
open FT battery pack
347
ENM3 Lightvent EC Emergency
circuit
Number of lamps Shielding options Ballast type Switching Finish
in cross section HOL Holes GEB Generic electronic SCT Single circuit C100 Satin anodized finish (standard)
1 WIN Windows ballast DCT Dual circuit C200 Peerless standard white (low gloss)
2 SLT Slots GEB10 10% THD ballast C005 Soft white (low gloss)
3 C032 White white (gloss)
C041 White white (low gloss)
NOTES: C099 Custom color (consult factory)
1 Maximum number of emergency sections per run should not ex-
ceed number of fixture sections, minus one. For additional
sections, consult factory.
2 EC and EL not available concurrently. EL and EC not available with
DCT in 4’ sections. Separate feed required.
LITHONIA FL
LUMINAIRE CROSS SECTIONS
FLUORESCENT
®
Envision Intended Use
Envision® I/D lighting delivers exceptional performance at an affordable price. The sophisticated
indirect lighting optics can meet stringent IES standards for ceiling uniformity, providing soft, even
illumination virtually free of glare and harsh shadows.
I/D
Construction Shielding Electrical of 4', 8' and 12'. For total fixture
Housing AA 6063 T6 extruded Parabolic aluminum baffles with Specify 120 volt or 277 volt. Pre- length add 1/2” for each end-cap.
aluminum forming an 8" x 29/16" Achroma™ finish standard; semi- wired with prescribed circuits as
rounded channel. Die-cast end plate specular finish available. Includes specified. UL listed. For special
Listings
mechanically attached with no VisorOptic™ opal diffuser lamp circuiting, consult factory. T5 high- UL Listed to US and Canadian safety
exposed fasteners. shield. output lamps are included. standards.
Ordering Information Example: 1 ENM4 2 54T5HO 40FT R12 120 GEB10 2SE EL SCT LP835 F1/24 C005 SSB
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Number of lamps Maximum section length Number of emergency sections Lamp color Finish
in cross section (sections per run) (optional)1
R4 4’ section L/LP No lamp C100 Satin anodized finish
1 R8 8’ section 1SE 1 section LP830 3000°K 80+ CRI (standard)
2 R12 12’ section 2SE 2 sections LP835 3500°K 80+ CRI C200 Peerless standard white
XSE X sections LP841 4100°K 80+ CRI (low gloss)
3
C005 Soft white (low gloss)
NOTES: C032 White white (gloss)
1 Maximum number of emergency sections per run equals C041 White white (low gloss)
number of fixture sections, minus one. For additional
C099 Custom color
sections, consult factory.
(consult factory)
2 EC and EL not available concurrently. EL and EC not avail-
able with DCT in 4’ sections. Separate feed required.
WALL MOUNT
Intended Use
Envision® Wall lighting uses the same high-quality optics as the pendant-mounted fixtures to project
soft, uniform light on the wall above and across the ceiling in corridors, small offices, rooms with low
Envision®
ceilings, and in general use areas. Its diffuse indirect illumination provides high visual effectiveness
and comfort, satisfying the most demanding requirements while making it possible to meet stringent
IES standards.
Wall
Finish mechanically attached with no optical lens. Electrical
Standard colors are satin anodized exposed fasteners. Specify 120 volt, 277 volt or 347
aluminum, standard white (low
Fixture Length volt. Pre-wired with prescribed
gloss), white white (gloss) and white
Reflectors Specify nominal fixture/row length circuits as specified. For special
white (low gloss). Die-formed reflectors combine in feet. For long runs, advise circuiting, consult factory.
hammertone specular aluminum and maximum extrusion length if 12’ if
Construction baked white enamel (nominal not acceptable. 4’, 8’ or 12’ nominal Listings
Housing AA 6063 T6 extruded reflectance 86%). Optical system sections used to create runs. UL listed to US and Canandian safety
aluminum forming a 9" x 3" rounded includes micro-prismatic, 100% standards.
channel. Die-cast end plate virgin acrylic specular/diffusing
Ordering Information Example: 4 ENIW 020006 T8 40FT R12 GEB10 SCT L/LP C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Catalog number Maximum section length Number of emergency sections Switching Finish
Wall mount R2 2’ section 1SE 1 section SCT Single circuit C100 Satin anodized aluminum
010005 T8 1 lamp R3 3’ section 2SE 2 sections DCT Dual circuit C200 Standard white (low gloss)
020006 T8 2 lamp R4 4’ section XSE X sections C005 Soft white (low gloss)
R8 8’ section C032 White white (gloss)
R12 12’ section C041 White white (low gloss)
NOTES: C099 Custom color (consult
1 For long runs, advise maximum extrusion length if factory)
12’ is not acceptable. 4’, 8’ or 12’ nominal sections
used to create runs.
LITHONIA FL
LUMINAIRE CROSS SECTIONS
®
Envision Cove Intended Use
Envision® Cove lighting enhances even ordinary spaces, turning ceilings into glowing surfaces that
illuminate without a hint of glare or uncomfortable contrast. Peerless optics deliver a smooth, even
wash on the wall above and far across the ceiling. No socket shadows, no fall-off, just pure, even
light.
Construction hammertone specular aluminum Electrical section. Using internal joiners, 4’, 8’
Housing AA 6063 T6 extruded baked white enamel (nominal Specify 120 volt, 277 volt or 347 volt. and 12’ sections can be joined to
aluminum forming a 6” rounded reflectance 86%) Pre-wired with prescribed circuits. form longer-length fixtures.
channel. Die-cast end plate attaches For special circuiting, consult factory.
with no exposed fasteners.
Finish Listings
Satin anodized or white paint Nominal Fixture Length UL Listed to US and Canadian safety
Reflectors standard; custom colors available. 4’, 8’ and 12’ lengths in a single standards.
Die-formed reflectors combine
Ordering Information Example: 4 LD6 010000 T8 24FT R12 120 GEB SCT LP730 F1/12 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity Light direction/lamps up/lamps down/shielding Lamp type Voltage Emergency type Mounting Feed/overall Finish2
suspension1
Specify Up Lights Up and Downlights T8 120 EL Emergency F1/ T-bar C100 Satin anodized
number of 1 lamp up 1 lamp up, 1 lamp down 277 battery pack ceiling 12 12” finish
fixtures. 010000 open 211104 baffle EC Emergency F2/ Hard 15 15” (standard)
347
010100 baffle 211204 lens circuit ceiling 18 18” C200 Peerless
010200 lens 211504 open/baffle EN Emergency hori- 21 21” standard
2 lamps up 211654 open/lens battery pack zontal 24 24” white
020004 open 211754 lens/baffle with night- J-box (low gloss)
020102 baffle
XX XX”
1 lamp up, 1 lamp down light circuit F3/ Stem C005 Soft white
020202 lens 311204 lens mount
Fixture 1 lamp up Nominal fixture Ballast type Switching (low gloss)
311654 open/lens
row length C032 White white
LD6 6” round 310202 lens 2 lamps up, 1 lamp down GEBElectronic SCT Single circuit (gloss)
suspended 310652 open/lens 321203 lens Specify nominal ballast DCT Double circuit C041 White white
Downlights 321653 open/lens
LD6W 6” round fixture/row length GEB10 GEB10 (low gloss)
1 lamp down 1 lamp up, 1 lamp down
wall in feet. 10% THD
101100 baffle 411206 lens CO99 Custom color
mount 411656 open lens __FT ballast (consult
101200 lens
101201 lens 1 lamp up, 2 lamps down factory)
101202 lens 412205 lens Lamp color Options
Maximum Number of
2 lamps down 412655 open/lens section length emergency sections L/LP No lamp RFI Radio frequency
102102 baffle
102203 lens R4 4’ section 1SE 1 section LP730 3000°K, 70 + CRI interference suppressors
1 lamp down R8 8’ section 2SE 2 sections LP735 3500°K, 70 + CRI (std.) DL Damp location label
201103 baffle R12 12’ section XSE X sections LP741 4100°K, 70 + CRI CFG Configuration
201203 lens
LP830 3000°K, 80 + CRI GMF Slow blow fuse
201503 open/baffle GLR Fast blow fuse
LP835 3500°K, 80 + CRI (std.)
201653 open/lens ELH EM through-wire
201753 lens/baffle LP841 4100°K, 80 + CRI harness
1 lamp down ELS EM through-wire
401204 lens harness with single feed
LITHONIA FL
401654 open/lens NOTES:
1 Follow mounting letter by overall suspen-
sion length (ceiling to bottom of fixture) in
inches.
2 To match custom color chip, specify C099.
If unknown, specify XXX.
FLUORESCENT
UORESCENT
PEERLESS
Intended Use
LD9 A classic design, the LD9 Series features a pure round form, flat endcaps and balanced brightness to
create a crisp, classic look. Designed for school, library and commercial spaces, the LD6 luminaire
Available Summer 2006 also works well in retail and other public spaces where the classic look combined with the ability to
have a higher, direct-light component are desired.
Construction hammertone specular aluminum Electrical section. Using internal joiners, 4’, 8’
Housing AA 6063 T6 extruded baked white enamel (nominal Specify 120 volt, 277 volt or 347 volt. and 12’ sections can be joined to
aluminum forming a 6” rounded reflectance 86%) Pre-wired with prescribed circuits. form longer-length fixtures.
channel. Die-cast end plate attaches For special circuiting, consult factory.
with no exposed fasteners.
Finish Listings
Satin anodized or white paint Nominal Fixture Length UL Listed to US and Canadian safety
Reflectors standard; custom colors available. 4’, 8’ and 12’ lengths in a single standards.
Die-formed reflectors combine
Ordering Information Example: 4 LD9 211650 T8 36FT R12 277 GEB10 EL SCT L/LP F1/24 C100 GMF
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity Light direction/lamps up/lamps down/shielding Lamp Voltage Emergency type Mounting Feed/ Finish2
type overall
Specify Up Lights Up and Downlights 120 EL Emergency F1/ T-bar suspension1 C100 Satin
number of 1 lamp up 1 lamp up, 1 lamp down T8 277 battery pack ceiling anodized
fixtures. 010000 open 211200 lens 347 EC Emergency F2/ Hard 12 12” finish
010100 baffle 211650 open/lens circuit ceiling 15 15” (standard)
2 lamps up, 2 lamps down EN Emergency hori- 18 18” C200 Peerless
2 lamps up
020001 001 shielding 222100 baffle battery pack zontal 21 21” standard
020102 baffle 222201 lens with night- J-box 24 24” white
020202 lens 222500 open/baffle light circuit F3/ Stem XX XX” (low gloss)
3 lamps up 222651 open/lens mount C005 Soft white
Fixture 222750 750 shielding Nominal fixture Ballast type Switching
030004 open (low gloss)
2 lamps up, 3 lamps down row length
LD9 9” 030104 baffle GEB Electronic SCT Single circuit C032 White white
030203 lens 223101 101 shielding Specify nominal
round ballast DCT Double circuit (gloss)
Downlights
223202 lens fixture/row
sus- 223501 open/baffle GEB10 GEB10 C041 White white
pended 1 lamp down length in feet. 10% THD (low gloss)
101100 baffle 223652 open/lens
LD9W 9” round 3 lamps up, 2 lamps down __FT ballast C099 Custom color
wall 101200 lens
232102 baffle (consult
mount 2 lamps down
232203 lens factory)
102102 baffle
102201 lens 232502 502 shielding
232653 open/lens
Maximum Number of Lamp color Options
3 lamps down section length emergency sections
103103 baffle 232751 lens/baffle L/LP No lamp RFI Radio frequency
103202 lens 3 lamps up, 3 lamps down R4 4’ section 1SE 1 section LP730 3000°K, 70 + CRI interference suppressors
233103 baffle R8 8’ section 2SE 2 sections LP735 3500°K, 70 + CRI (std.) DL Damp location label
233204 lens R12 12’ section XSE X sections LP741 4100°K, 70 + CRI CFG Configuration
233503 open/baffle
LP830 3000°K, 80 + CRI GMF Slow blow fuse
233654 open/lens
LP835 3500°K, 80 + CRI (std.) GLR Fast blow fuse
LP841 4100°K, 80 + CRI ELH EM through-wire
harness
NOTES: ELS EM through-wire
1 Follow mounting letter by overall suspen- harness with single feed
sion length (ceiling to bottom of fixture) in
inches.
2 To match custom color chip, specify C099.
If unknown, specify XXX.
PEERLESS
LITHONIA FL
High-Performance Lighting
FLUORESCENT
UORESCENT
PEERLESS
® Intended Use
Cerra 7 The Cerra® 7 Series features a pure crescent architectural form and delivers exceptional
performance and versatility. Cerra® 7 optical systems are precisely engineered to fully utilize our
advanced high-output T5 (HOT-5®) fixture technology.
Designed for commercial and educational spaces, the petite Cerra® 7 Series has a nominal height of
only 2". The optional die-cast sculptured end caps finish the rows with an elegant accent.
Features The Cerra® 7 Series features the Sculptured end caps also are wire gauge, consult factory. Plug-in cap. Using internal joiners, 4', 8' and
2" x 7" crescent. smallest crescent profile in the available for an elegant accent. electrical connectors and T5HO 12' sections can be joined to form
industry and pure architectural form. lamps included. longer-length fixtures.
1, 2 or 3 lamps T5HO. Refer to the Peerlite catalog or your
The distinctive square window agent for ordering information. Fixture Length Listings
Partially perforated and indirect/open. pattern creates a dynamic visual 4', 8' and 12' lengths in a single UL Listed to US and Canadian safety
fluidity as a unique highlight option. Electrical section for exact suspension spacing standards.
Rugged, one-piece, cold rolled steel Specify 120 volt, 277 volt or 347
construction. of 4', 8' and 12'. For total fixture
Specular high-performance volt. Pre-wired with 16-gauge length, add 1/16" for each flat end
reflectors are offered for partially fixture wire. For special circuiting or plate or 3" for each sculptured end
perforated and indirect/open.
Ordering Information Example: 7CRM2 2 54T5HO WHR 40FT R12 277 GEB10 DCT LP835 F1/18 SCEP
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Type Rows and sections1 Voltage Ballast2 Emergency type3,4 Mounting type Feed/overall
7CRM1 Indirect _FT R4 120 GEB10 F1/ T-bar ceiling suspension5
(blank) None
7CRM2 Indirect/open _FT R8 277 EL Emergency (Universal 12 12"
7CRM7 Partially _FT R12 347 battery pack mounting 15 15"
perforated EC Emergency/night- bracket) 18 18"
light circuit F2/ Hard ceiling 21 21"
EN Emergency (horizontal j-box) 24 24"
battery pack with F4A/ IDS clip, 15/16" tee XX XX"
night-light circuit F4B/ IDS clip, 9/16" tee
F4C/ IDS clip, screw slot
SUSPENDED
Cerra®10
Intended Use
The Cerra® 10 Series features a pure crescent architectural form and delivers exceptional
performance and versatility. Cerra® 10 optical systems are precisely engineered to fully conventional
T8 lamps.
Designed for commercial and educational spaces, the slender Cerra® 10 Series has a nominal height
of only 3". The optional die-cast sculptured end caps finish the rows with an elegant accent.
Features The Cerra® 10 Series shares the Refer to the Peerlite catalog or your Fixture Length Listings
3" x 10" crescent. crescent form of the Cerra® 7 Series agent for ordering information. 4', 8' and 12' lengths in a single UL Listed to US and Canadian safety
with a slightly larger scale. section for exact suspension spacing standards.
2, 3, or 4 T8 lamps. Electrical of 4', 8', and 12'. For total fixture
On projects where other crescent Specify 120 volt, 277 volt or 347
Partially perforated, fully length, add 1/16" for each flat end
shapes are specified, the Cerra® 10 volt. Pre-wired with 16-gauge
perforated and indirect/open. plate or 4" for each sculptured end
Series is a competitive alternative fixture wire. For special circuiting or cap. Using internal joiners, 4', 8' and
with many value-added features. wire gauge, consult factory. Plug-in
Rugged, one-piece, cold rolled steel 12' sections can be joined to form
construction. electrical connectors and T8 lamps longer-length fixtures.
included.
Ordering Information Example: 10CRM2 4 32 WHR 40FT R12 277 GEB DCT LP735 F1/18 SCEP
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
LITHONIA FL
6 Suspension length is measured from finished ceiling to bottom of fixture.
LUMINAIRE CROSS SECTIONS (3" x 10" Nominal)
7 For single feed of all emergency or night-light sections in row from opposite end
of normal power feed.
® Intended Use
Cerra ID Cerra® ID from Peerlite, is an indirect/direct suspended luminaire that features a low profile and pure
crescent shape. Use Cerra® ID in classrooms, conference rooms, laboratories and office spaces where the
general benefits of indirect lighting are desired, but a higher percentage of direct light is required.
Construction SBL – White steel straight blade Finish consult factory. Plug-in electrical flat end plate or 4" for each
Housing is a nominal 10" x 3" baffle. Fine textured white polyester powder connectors included. T8 lamps sculptured end cap. Using internal
crescent channel formed from one- paint is standard. Consult factory for included. joiners, 4', 8', and 12' sections can be
piece cold-rolled steel. Flat end plate PPL – White perforated steel joined to form longer-length
special finish requirements.
standard. Sculptured die-cast straight blade baffle. Fixture Length fixtures.
aluminum end cap is optional. Reflectors Electrical 4', 8', and 12' lengths in a single
Specify 120, 277 or 347 volts. Pre- section for nominal suspension Listings
Shielding Reflecting surfaces have white finish spacing of 4', 8' and 12'. For total UL Listed to US and Canadian safety
wired with 16 ga. fixture wire. For
SSB – Parabolic aluminum baffle (nominal reflectance 90%). fixture length, add 1/16" for each standards.
special circuiting or wire guage,
with semi-specular finish.
Ordering Information Example: 10CRM4 2 32 WHR SSB 40FT R12 277 GEB DCT LP735 F1/18 SCEP
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Fixture Lamp type Baffle Voltage Emergency type Mounting type Feed/overall
10CRM4 54T5HO SSB Semi specular (optional)2 suspension
120 F1/ T-Bar ceiling
28T5 SBL White steel blade 277 (blank) No emergency or (universal mounting 12 12”
32 PPL White perforated night-light bracket) 15 15”
347
steel baffle EL Emergency F2/ Hard ceiling 18 18”
battery pack (horizontal J-box) 21 21”
Number of lamps Nominal row length Ballast type EC Emergency/night- F3/ Rigid stem mount 24 24”
in cross section __FT GEB T8 only light circuit F4A/ IDS clip 15/16" tee XX XX”
1 GEB10 10% THD ballast EN Emergency F4B/ IDS clip 9/16" tee
2 (consult factory battery pack with
F4C/ IDS clip screw slot
for dimming night-light circuit
3 options)
Distribution Maximum section length Number of emergency sections Switching Lamp color Options
(sections per run) (optional)1
WHR 65% up, 35% down R4 SCT Single circuit L/LP No lamps ACG Adjustable cable
(standard) R8 (blank) No emergency DCT Dual circuit LP730 3000ºK, 70+CRI grippers
SPR Specular4 R12 1SE 1 section LP735 3500ºK, 70+CRI APF Alternate power feed
40/60 0% up, 60% down 2SE 2 sections (standard T8) CMG Cord manager
20/80 20% up, 80% down XSE X sections LP741 4100ºK, 70+CRI DU Dust cover
0/100 0% up, 100% down LP830 3000ºK, 80+CRI ELH EM through-wire with
CLI Center lamp isolator3 LP835 3500ºK, 80+CRI separate feed
(standard T5/T5HO) ELS EM through-wire with
NOTES:
LP841 4100ºK, 80+CRI single feed
1 Maximum number of emergency sections per run equals number of fixture sections,
minus one. For additional sections, consult factory. GLR Fast blow fuse
2 EC and EL not available concurrently. EL and EC not available with DCT in 4’ sections. GMF Slow blow fuse
Separate feed required. OTM On tenon mount
3 Available with 3 lamp cross section only. SCEP Sculptured end cap
NYC New York City code
LUMINAIRE CROSS SECTIONS
SUSPENDED
Intended Use
With a pure crescent shape, parallel baffled openings and perforated side walls to soften the fixture
and provide a luminous form, Cerra® Lightvent from Peerlite delivers soft, even illumination for
Cerra®
office and school lighting applications. Cerra® Lightvent is available in the petit Cerra® 7 family and
the architecturally refined Cerra® 10 family.
Lightvent
Construction Finish Electrical spacing of 4', 8' and 12'. For total
Specify 7" x 2" or 10"x3" crescent Fine textured white polyester Specify 120 volt, 277 volt or 347 fixture length, add 1/16" for each flat
channel formed from one-piece cold- powder paint is standard. Consult volt. Pre-wired with 16 ga. fixture end plate. Using internal joiners, 4',
rolled steel. Flat end plate standard. factory for special finish wire. For special circuiting or wire 8' and 12' sections can be joined to
Sculptured die cast aluminum end requirements. gauge, consult factory. Plug-in form longer-length fixtures.
cap is optional. electrical connectors included. T8,T5
Shielding or T5HO lamps included.
Listings
Reflectors Parallel white painted steel baffles UL Listed to US and Canadian safety
Reflecting surfaces have white finish with acrylic opal diffuser overlay. Die- Fixture Le ngth standards.
(nominal reflectance 90%). punched perforations on upper housing 4', 8' and 12' lengths in a single
with acrylic opal diffuser overlay. section for nominal suspension
Ordering Information Example: 7CRM3 2 54T5HO WHR 40FT R12 277 GEB10 DCT LP835 F1/18 SCEP
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Fixture Lamp type Maximum Voltage Emergency type 2, 3 Mounting type Feed/overall
section length suspension
7CRM3 54T5HO 120 (blank) No emergency or F1/ T-Bar ceiling (universal
10CRM3 28T5 R4 277 night-light mounting bracket) 12 12”
325 R8 347 EL Emergency battery F2/ Hard ceiling 15 15”
R12 pack (horizontal J-box) 18 18”
Number of lamps Nominal row length1 Ballast type EC Emergency/night-light F3/ Rigid stem mount 21 21”
in cross section circuit (10CRM3 only) 24 24”
__FT GEB T8 only EN Emergency battery F4A/ IDS clip 15/16" tee XX XX”
14 GEB10 <10% THD pack with night-light
2 ballast (consult F4B/ IDS clip 9/16" tee
circuit
3 factory for F4C/ IDS clip screw slot
4 dimming options)
LITHONIA FL
5 Not available on 7CRM3. LUMINAIRE CROSS SECTIONS
Cerra®
Accessories
Features Corners and Tenons Available for all Cerra® product
Sculptured ends offerings.
Die-cast aluminum with aluminum
Die-cast aluminum with a extrusions. Refer to the Peerlite catalog or your
minimizing, elegant design. agent for ordering information.
Allows you to create configurations
Available for all Cerra® product or introduce architectural rhythm
offerings. into a space.
Determine desired configuration of fixtures, Order fixture sections. Specify desired component.
1 tenons and corners.
For total row length, sum 4', 8' and 12' fixture
2 See Peerlite catalog for ordering information. 3 See below.
Tenon Connectors
Extruded aluminum, sculptured die-cast end caps separate
luminaire sections creating an architectural rhythm.
Corner connectors create
the opportunity for 90°
angles in row sections while
maintaining electrical feed
PEERLESS
WALL MOUNT
Cerra® Wall
Intended Use
With a clean architectural form and exceptional performance, the Cerra® WallSeries offers
extraordinary versatility in a wall-mount indirect luminaire.
These elegant luminaires complement the Cerra® 7 and Cerra® 10 suspended products enabling
them to be used together on projects. The optional die-cast sculptured end caps finish the rows with
an elegant accent.
Features to create uniform illumination with volt. Pre-wired with 16-gauge For total fixture length, add 1/16" for
1 or 2 lamps, T8 or T5HO. no socket shadows. This superior fixture wire. For special circuiting or each flat end plate or 4" for each
performance is offered at the same wire gauge, consult factory. Plug-in sculptured end cap. For longer run
Indirect, partially perforated and or lower price. electrical connectors and lamps lengths, sections are attached using
indirect/open. included. internal joiners.
Refer to the Peerlite catalog or your
Rugged, one-piece, cold rolled steel agent for ordering information. Fixture Length 2' and 3' sections available; consult
construction. Nominal 4', 8' and 12' lengths form factory for details.
Electrical row lengths. Actual section length =
Unlike the competition, the optics of Specify 120 volt, 277 volt or 347 Listings
the Cerra® Wall Series are designed 11 5/8" per nominal foot specificed.
UL Listed to US and Canadian safety
standards.
Ordering Information Example: CRW2 1 54T5HO WHR 40FTN R12 277 GEB10 SCT LP835 SCEP
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
LITHONIA FL
LUMINAIRE CROSS SECTIONS (8" x 3" Nominal)
CRW1 FLUORESCENT
UORESCENT
1 T8 lamp 2 T8 lamps
CRW7
® Intended Use
Cerra Baffle A new take on a classic full baffle design, the Cerra® Baffle Series features a pure crescent form,
sculptured endcaps, and balanced zonal brightness to create a crisp, fresh look.
Designed for school, library, and commercial spaces, Cerra® Baffle also works well in retail and other
public spaces where the distinctive look combined with the ability to have a higher, direct-light
component are desired.
Features lamp configurations. Two standard finishes are available; wire gauge, consult factory. Plug-in Using internal joiners, 4', 8' and 12'
Full-baffle style crescent form. white low-gloss and natural electrical connectors and lamps sections can be joined to form longer
Opal diffuser available to shield aluminum. Optional custom colors also included. rows.
Nominal 3” x 10” size.
lamp view. Standard with T5/T5HO available on spline and end plates.
Extruded aluminum spline with one- lamping and as an option with T8. Fixture Length Listings
piece aluminum baffle and steel and Electrical 4', 8' and 12' lengths in a single UL Listed to US and Canadian safety
Multiple indirect and direct light
die-cast aluminum endcap. Specify 120 volt, 277 volt or 347 section for exact suspension spacing standards.
distribution options: T8 – 70/30, 50/
volt. Pre-wired with 16-gauge of 4', 8' and 12'. For total fixture
Available in 2,3,4 T8 lamp 50, 30/70, 5/95. T5/T5HO – 80/20,
fixture wire. For special circuiting or length, add 1" for each end cap.
configurations and 1,2,3,4 T5/T5HO 40/60, 5/95.
Ordering Information Example: 10CRM8 2 32 40FT R8 277 GEB10 DCT LP835 F1/18 C100 ACG
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
WALL MOUNT
Cerra® Baffle Wall
Intended Use
The Cerra® Baffle Wall Series uses the distinct design element of the classic full baffle luminaire and
applies them to a wall-mount luminaire providomg balanced zonal brightness and a crisp, fresh look.
These elegant luminaries complement the Cerra® Baffle and Cerra® Direct suspended products
enabling them to be used together on projects. Designed for commercial, educational, and public
spaces where a wall-mount indirect luminaire is required.
Features Available in 1- and 2-lamp T8, T5, Electrical Fixture Length Listings
Full-baffle style half-crescent form. and T5HO lamp configurations. Specify 120 volt, 277 volt or 347 Nominal 4', 8' and 12' sections form UL Listed to US and Canadian safety
Nominal 3”x 6.5” size. volt. Pre-wired with 16-gauge row lengths. For longer run lengths, standards.
Two standard finishes are available;
fixture wire. For special circuiting or sections are attached using internal
Extruded aluminum spline with one- white low-gloss and natural
wire gauge, consult factory. Plug-in joiners.
piece aluminum baffle and steel and aluminum. Optional custom color
electrical connectors and lamps 2' and 3' sections available, consult
die-cast aluminum endcap. also available on spline and end
included. factory for details.
plates.
Ordering Information Example: CRW8 2 54T5HO WHR 40FT R8 277 GEB10 DCT LP835 C100 GLR
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Lamps Rows and sections1 Ballast3,4 Emergency type3,5 Lamp color Options
1 32 _FT R4 (blank) None (blank) None L/LP No lamp DU Dust cover
1 28T5 _FT R8 GEB T8 only EL Emergency battery pack LP730 3000°K, 70 + CRI ELH EM through-wire with
1 54T5HO _FT R12 GEB10 EC Emergency circuit/night-light LP735 3500°K, 70 + CRI separate feed
2 32 circuit (standard T8) ELS EM through-wire with
2 28T5 EN Emergency battery pack with LP741 4100°K, 70 + CRI single feed
2 54T5HO night-light circuit LP830 3000°K, 80 + CRI GLR Fast blow fuse
Number of lamps in LP835 3500°K, 80 + CRI GMF Slow blow fuse
cross section and lamp (standard T5/T5HO)
type. LP841 4100°K, 80 + CRI
LITHONIA FL
NOTES: LUMINAIRE CROSS SECTIONS (8" x 3" Nominal)
1 Specify nominal row length in 4' increments. R4/
R8/R12 indicates maximum length of section. Ex-
ample: 40FT R12 is a 40' run with a 12' maximum
section length. Consult factory for additional in-
crements.
2 EL, EN, dimming ballast not available with 347V.
3 Optional.
FLUORESCENT
® Intended Use
Cerra Direct For those applications where only direct light is needed from a suspended or surface-mounted
luminaire, the Cerra® Direct Series is the solution. With a clean crescent shape and classic full baffle
design, Cerra® Direct can be applied successfully in a variety of applications in commercial and retail
SURFA
spaces.
SUSPENDED AND SURF
Features Available in 1- and 2-lamp T8, T5, Electrical section for exact suspension spacing
Full-baffle style crescent form. and T5HO lamp configurations. Specify 120 volt, 277 volt or 347 of 4', 8' and 12'. For total fixture
Nominal 3” x 7” size. volt. Pre-wired with 16-gauge length, add 1" for each end cap.
Straight blade baffles with Using internal joiners, 4', 8' and 12'
fixture wire. For special circuiting or
Pendant and surface-mount products perforated side reflector/shield. sections can be joined to form longer
wire gauge, consult factory. Plug-in
available. electrical connectors and lamps rows.
Two standard finishes are available;
Extruded aluminum spline with one- white low-gloss and natural included.
Listings
piece aluminum baffle and steel and aluminum. Optional custom color also
available on spline and end plates.
Fixture Length UL Listed to US and Canadian safety
die-cast aluminum endcap. standards.
4', 8' and 12' lengths in a single
Ordering Information Example: 7CDM8 2 54T5HO 40FT R8 277 GEB10 DCT LP835 F1/18 C100 GMF
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
SURFA
White, polyester powder perforated of 4', 8' and 12'. For total fixture
Nominal 7" x 33/4" with extruded side reflector/shield (nominal White polyester powder. Specify 120, 277 or 347 volts. Pre- length, add 1" for each endcap. Using
aluminum spline and nominal four- reflectance 90%). wired with 16awg. fixture wire. For internal joiners 4', 8', and 12'
On the natural finish option, the sections can be joined to form longer
ACE MOUNT
foot, one-piece aluminum baffle special circuiting or wire gauge,
Natural finish option includes clear- spline is anodized with a clear coat rows.
assemblies and steel and die-cast consult factory. Plug-in electrical
coat aluminum baffle and baffle and a painted endcap.
aluminum sculptured endcap. connectors included.
perforated side reflector/shield. Optional custom color on the spline Listings
Reflectors Shielding and endcaps is available; consult Fixture Length UL Listed to US and Canadian safety
White, polyester powder center factory. 4', 8' and 12' lengths in a single standards.
Straight blade baffles with acrylic
reflector (nominal reflectance 90%). section for exact suspension spacing
opal diffuser overlay.
Ordering Information Example: 7CDM8 1 28T5 OPD 20FT R8 120 GEB10 SCT LP835 F1/18
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Lamp type Maximum section Number of emergency sections2 Switching Lamp color Options
length
54T5HO 1SE 1 section SCT Single L/LP No lamps ACG Adjustable cable
28T51 R4 2SE 2 sections circuit LP730 3000ºK, 70+CRI grippers7
32 R8 XSE X sections LP735 3500ºK, 70+CRI APF Alternate power feed7
R12 (standard T8) CMG Cord manager7
Baffle type Voltage LP741 4100ºK, 70+CRI ELH EM through-wire with
LP830 3000ºK, 80+CRI separate feed
OPD Standard brightness 120
LP835 3500ºK, 80+CRI ELS EM through-wire with
OPI Intermediate brightness 277 (standard T5/T5HO) single feed
diffuser 347 3 LP841 4100ºK, 80+CRI GLR Fast blow fuse
GMF Slow blow fuse
NYC New York City code
VSS Variable support
spacing7
LITHONIA FL
NOTES: LUMINAIRE CROSS SECTIONS
1 Not available with 347 or dimming ballast.
2 Must be in 4’ increments.
3 EL, EN, dimming ballast not available with 347V.
4 Consult factory for dimming ballast.
5 Optional.
6 EL and EC are installed in last 4' of fixture sections
and are not available concurrently with each other.
FLUORESCENT
® Intended Use
Cerra Direct Accents With a clean crescent shape and classic full baffle design, Cerra® Direct Accents can be applied
successfully in a variety of applications in commercial and retail spaces. These elegant luminaires
complement the Cerra® Baffle and Cerra® Direct suspended products enabling them to be used
SURFA
together on projects.
SURF
Ordering Information Example: CDW8 1 54T5HO 40FT R8 277 GEB10 SCT LP835 C100 GMF
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Fixture Lamps Baffle options Max. section Voltage Ballast type Finish Options
length'
CDS8 Sconce 1 OPL Straight blade baffle with low 120 GEB10 C041 White WAV Angle mount,
Number of lamps brightness diffuser (standard) U 2 2' 277 (standard) vertical
in cross section. OPI Straight blade baffle with 347 C100 Natural WAH Angle mount,
intermediate brightness aluminum horizontal
diffuser Consult Peerlite Color Ordering WSP Wall spacer
Guide for other color options. WFV Flush vertical
WFV Flush horizontal
LUMINAIRE CROSS SECTIONS NOTES:
1 Optional.
2 Specify nominal row length in 4' increments. R4/
R8/R12 indicates maximum length of section. Ex-
ample: 40FT R12 is a 40' run with a 12' maximum
section length. Consult factory for additional incre-
ments.
3 EL, EN, dimming ballast not available with 347V.
PEERLESS
SUSPENDED
Intended Use
The Aero® Series offers superior design and engineering in a choice of totally indirect or indirect/
open fixtures, all of which meet stringent IES RP-1 standards for office lighting. Its angular lines and
Peerlite Aero®
slim proportions complement any interior environment.
The Aero® Series delivers advanced T5 high-output (HOT-5®) fixture technology, nearly doubling
the lumen output of a T8 fixture.
Features Utilizes energy-efficient, T5 high- installation and joining. Electrical section for exact suspension spacing
Contemporary, ultra-shallow, output lamps. Specify 120 volt, 277 volt or 347 of 4', 8' and 12'. For total fixture
Fine textured white paint standard. length, add ½" for each end cap.
angular form. volt. Pre-wired with prescribed
Choice of total indirect distribution Consult factory for special finish Using internal joiners, 4', 8' and 12'
circuits as specified. For special
Rugged, one-piece, cold-rolled steel or die-punched perforated hole requirements. sections can be joined to form longer
circuiting, consult factory. T5HO
construction. Die-formed white pattern on underside, providing an rows.
HOT-5® luminaire technology lamps are included.
reflector with minimum 85 percent appealing visual cue.
significantly enhances the benefits of Listings
reflectance.
Electrical quick connectors facilitate the T5 high output lamp.
Fixture Length
4', 8' and 12' lengths in a single UL Listed to US and Canadian safety
standards.
Ordering Information Example: AEM2 2 54T5HO 12FT R8 277 GEB10 SCT L/LP F2/15 ACG
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Type Rows and sections1 Ballast2 Emergency type3,4 Switching Mounting type Feed/overall
suspension5
AEM1 Indirect _FT R4 GEB10 (blank) None SCT Single F1/ T-Bar ceiling
_FT R8 EL Emergency circuit F2/ Hard ceiling 12 12”
AEM2 Indirect/open
_FT R12 battery pack DCT Dual (horizontal J-box) 15 15”
AEM2 CWIN Indirect/open,
continuous EC Emergency circuit F4A/ IDS clip 15/16" tee 18 18”
window circuit/night-light F4B/ IDS clip 9/16" tee 21 21”
circuit F4C/ IDS clip screw slot 24 24”
EN Emergency XX XX”
battery pack with
night-light circuit
LITHONIA FL
LUMINAIRE CROSS SECTIONS (6" x 2" Nominal)
NOTES:
1 Specify nominal row length in 4' increments. R4/
R8/R12 indicates maximum length of section. Ex-
ample: 40FT R12 is a 40' run with a 12' maximum
section length.
2 GEB 10 = generic electronic ballast, <10% THD.
FLUORESCENT
Consult factory for dimming options. AEM1 – 1 T5/T5HO lamp AEM1 – 2 T5/T5HO lamps AEM1
3 Optional.
UORESCENT
® Intended Use
Enzo The Enzo® Series complements any interior architecture with its diminutive elliptical shape and
flawless textured finish. The Enzo® Series offers superior design and engineering in a choice of totally
indirect or indirect/open fixtures, all of which meet stringent IES RP-1 standards for office lighting.
The Enzo® Series delivers advanced T5 high-output (HOT-5®) fixture technology, nearly doubling
the lumen output of a T8 fixture.
Features Choice of total indirect distribution HOT-5® luminaire technology Fixture Length
Contemporary, ultra-shallow, oval or die-punched perforated hole significantly enhances the benefits 4', 8' and 12' lengths in a single section
form. pattern on underside providing an of the T5 high output lamp. for exact suspension spacing of 4', 8'
appealing visual cue. and 12'. For total fixture length, add
Rugged, one-piece, cold-rolled steel Electrical ½" for each end cap. Using internal
construction. Electrical quick connectors facilitate Specify 120 volt, 277 volt or 347 joiners, 4', 8' and 12' sections can be
installation and joining. volt. Pre-wired with prescribed
Die-formed white reflector with joined to form longer rows.
circuits as specified. For special
minimum 85% reflectance. Fine textured white paint standard.
Consult factory for special finish
circuiting, consult factory. T5HO Listings
Utilizes energy-efficient T5 high- lamps are included. UL Listed to US and Canadian safety
requirements.
output lamps. standards.
Ordering Information Example: EZM2 2 54T5HO 12FT R8 277 GEB10 SCT L/LP F1/24 ACG
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Type Rows and sections1 Ballast2 Emergency type3,4 Switching Mounting type Feed/overall
SCT Single suspension5
EZM1 Indirect _FT R4 GEB10 (blank) None F1/ T-Bar ceiling
EZM2 Indirect/open _FT R8 EL Emergency battery circuit F2/ Hard ceiling 12 12”
EZM2 CWIN Indirect/open, _FT R12 pack DCT Dual (horizontal J-box) 15 15”
continuous EC Emergency circuit/ circuit F4A/ IDS clip 15/16" tee 18 18”
window night-light circuit F4B/ IDS clip 9/16" tee 21 21”
EN Emergency battery F4C/ IDS clip screw slot 24 24”
pack with night- XX XX”
light circuit
SUSPENDED
Prima®
Intended Use
The Prima® family offers superior design and engineering in a wide variety of low-cost fixtures.
Designed to offer high-quality lighting for general office, school and library installations.
All Prima® fixtures share the same gracefully rounded shape and can be combined on the same
project, providing an additional level of versatility where needs vary.
Features partially perforated. Electrical for exact suspension spacing of 4', 8'
Pure, low-profile oval form. Specify 120 volt, 277 volt or 347 and 12'. For total fixture length, add
Die-formed white reflector system. ½" for each end cap. Using internal
volt. Pre-wired with prescribed
Rugged, one-piece, roll-formed, circuits as specified. For special joiners, 4', 8' and 12' sections can be
Electrical quick connectors facilitate
cold-rolled steel construction. circuiting, consult factory. Lamps are joined to form longer rows.
installation and joining.
Choice of optical system – indirect included.
Fine textured white paint standard. Listings
only, indirect with Lightvent , Fixture Length UL Listed to US and Canadian safety
Consult factory for special finish
indirect/fully perforated or indirect/ standards.
requirements. 4', 8' and 12' lengths in a single section
Ordering Information Example: PRM1 1 32 40FT R12 120 GEB 2SE EL SCT LP735 F1/24
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Type Rows and sections2 Ballast3 Emergency type4,5 Switching Mounting type Feed/overall
(blank) None SCT Single suspension6
PRM1 Indirect _FT R4 GEB F1/ T-Bar ceiling
_FT R8 EL Emergency battery circuit F2/ Hard ceiling 12 12”
PRM3 Lightvent indirect GEB10
_FT R12 pack DCT Dual (horizontal J-box) 15 15”
PRM6 Indirect, fully
perforated1 EC Emergency circuit/ circuit F3/ Rigid stem mount 18 18”
night-light circuit F4A/ IDS clip 15/16" tee 21 21”
PRM7 Indirect, partially
perforated1 EN Emergency battery F4B/ IDS clip 9/16" tee 24 24”
pack with night- XX XX”
F4C/ IDS clip screw slot
light circuit
LITHONIA FL
NOTES: LUMINAIRE CROSS SECTIONS (9" x 3" Nominal)
1 PRM6 available for 2 lamps only. PRM3 and PRM7 avail- PRM1
able for 2 or 3 lamps only.
2 Specify nominal row length in 4' increments. R4/R8/R12
indicates maximum length of section. Example: 40FT R12
is a 40' run with a 12' maximum section length.
PRM1 – 1 T8 lamp PRM1 – 2 T8 lamps PRM1 – 3 T8 lamps
3 GEB = generic electronic ballast, <20% THD. GEB10 =
generic electronic ballast, <10% THD. Consult factory for
PRM3
FLUORESCENT
dimming options.
4 Optional.
UORESCENT
® Intended Use
Prima ID The Prima® I/D provides excellent ceiling uniformity and visual comfort while adding the
dimensionality that comes from a well controlled direct lighting component. Designed to offer high-
quality lighting for general office, school and library installations.
All Prima® fixtures share the same gracefully rounded shape and can be combined on the same
project, providing an additional level of versatility where needs vary.
Features Easy-to-maintain Achroma® requirements. for exact suspension spacing of 4', 8'
Pure, low-profile oval form. specular baffle finish provides and 12'. For total fixture length, add
precise light distribution while Electrical ½" for each end cap. Using internal
Rugged, one-piece, cold-rolled-steel exhibiting a soft, uniform louver Specify 120 volt, 277 volt or 347 joiners, 4', 8' and 12' sections can be
construction. appearance. volt. Pre-wired with prescribed joined to form longer rows.
circuits as specified. For special
Softshine® optical system provides Electrical quick connectors facilitate circuiting, consult factory. Lamps are Listings
uniform ceiling illumination, a well- installation and joining. included. UL Listed to US and Canadian safety
controlled direct lighting component standards.
and remarkable luminaire brightness Fine textured white paint standard. Fixture Length
control. Consult factory for special finish 4', 8' and 12' lengths in a single section
Ordering Information Example: PRM4 1 32 40FT R12 347 GEB 2SE EL SCT LP735 F1/24
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Type Rows and sections1 Ballast2 Emergency type3,4 Switching Mounting type Feed/overall
suspension5
PRM4 Indirect/direct _FT R4 GEB T8 only (blank) None SCT Single F1/ T-Bar ceiling
_FT R8 EL Emergency circuit F2/ Hard ceiling 12 12”
GEB10
_FT R12 battery pack DCT Dual (horizontal J-box) 15 15”
EC Emergency circuit/ circuit F3/ Rigid stem mount 18 18”
night-light circuit F4A/ IDS clip 15/16" tee 21 21”
EN Emergency F4B/ IDS clip 9/16" tee 24 24”
battery pack with F4C/ IDS clip screw slot XX XX”
night-light circuit
PRM4 – 3 lamps
COVE LIGHT
Intended Use
Peerlite HOT-5® cove lighting offers a compact, easy-to-install fixture that fits into smaller
architectural cavities.
HOT-5®
HOT-5® cove projects a wide distribution of illumination from fewer, smaller, higher-efficiency
lamps, transforming a ceiling into a source of pure, diffuse light, virtually eliminating all hot spots
and glare in the space.
Type Lamps Nominal luminaire Voltage Ballast2 Emergency type3,4 Lamp color Options
HCM5 Cove length1 120 GEB10 (blank) None L/LP No lamp ELH EM through-wire with
1 14T5
1 21T5 U2 2' 277 EL Emergency LP830 3000°K, 80 + CRI separate feed5
1 28T5 U3 3' 347 battery pack LP835 3500°K, 80 + CRI ELS EM through-wire with
1 24T5HO U4 4' EC Emergency (standard) single feed
1 39T5HO U8 8' circuit/night-light LP841 4100°K, 80 + CRI DU Dust cover
1 54T5HO circuit GMF Slow blow fuse
EN Emergency GLR Fast blow fuse
battery pack with
night-light circuit
LITHONIA FL
NOTES: LUMINAIRE CROSS SECTION (6" x 2" Nominal)
1 Actual length of 4' nominal fixture is 461/2" and 8'
nominal fixture is 93". Consult factory for availabil-
ity of 2' and 3' nominal luminaires.
2 GEB10 = generic electronic ballast, <10% THD.
Consult factory for dimming options.
3 Optional.
4 EL and EC not available concurrently.
FLUORESCENT
feed.
PEERLESS
HCM5 – 1 lamp
All Peerless and Peerlite modular luminaires utilize this easy mounting system. Shown below is a
representative installation guide. Mounting instructions for specific products are included with each
luminaire and also may be ordered through your Lithonia Lighting sales representative.
INSTALLATION
INSTALLA
ALLA
Mount on the grid... ...or off the grid Create support locations
1. Insert 1/4-20 x 3/4" bolt into 1. Insert 1/4-20 x 3/4" bolt* 1. Place 2" canopy flush with
bracket A (#MP-1997). into bracket A (#MP-1997). ceiling tile.
2. Thread upper cable retainer onto
* For special ceiling systems, 1/4-20 bolt.
may need to use 1/4-20 x 1"
bolt (by others).
INST
INSTALLA
ALLA
ALLATION
TION GUIDE
Secure the structure Hang and join the fixtures
Note: Hang fixtures prior to joining. NOTE: Hang fixtures prior to joining.
LITHONIA FL
FLUORESCENT
UORESCENT
PEERLESS