Professional Documents
Culture Documents
RIOSEIS GX-Plastic Shell - ENG
RIOSEIS GX-Plastic Shell - ENG
APPLICATIONS
RIOSEIS GX stands out due to its very high efficiency and its user
friendly handling in particular and therefore is predestined for use
as a Seismic explosive where strong and sharp detonating impulses
are presupposed.
1. Shell design channel for proper legwire placement and initiation. USE REGULATIONS
2. Plastic interlocking shell design for easy and firm assembly. RIOSEIS GX is deliverable as of a cartridge diameter of 25 mm. The
explosive isn‘t allowed for underground use. The initiation must be
made by a detonator with a secondary charge of 0,6 g PETN (No. 8
strength blasting cap) or a detonator with comparable initiation
ADVANTAGES power. The maximum permi ed hydrostatic pressure is 40 bars. The
application temperature for RIOSEIS GX is from -40 °C up to +60 °C.
Water resistant.
Technical Data
1,65 523 I/kg 588 kJ/kg 15,1 GPa 4.186 kJ/kg + 0,1% 6.300 m/s(*)
Class 1.1D
Contact your local MAXAM
representative for further information
UN Number 0081 and for obtaining a TDS in the local language.
SAFETY WARNING
Read the Instructions Safety Sheet and the Material Safety Data Sheet provided carefully before using RIOSEIS GX. RIOSEIS GX must not be used in
flammable environments such as methane or coal dust. MAXAM strongly recommends not to use RIOSEIS GX products with detonators and/or initiation
systems supplied by other manufacturers in the same blast and declines all liability in these cases.
RIOSEIS GH must be stored at moderate temperatures in a dry and well ventilated place.
Distributor