To start the generator, the user must: 1) turn on the battery isolator and main panel switch, 2) reset the fuel alarm if an external tank is connected or fill the base tank, 3) press buttons to select manual start and start the engine, and 4) manually charge and turn on the breaker to put the generator under load. The generator is stopped by pressing a button, and emergency stop should not be used.
To start the generator, the user must: 1) turn on the battery isolator and main panel switch, 2) reset the fuel alarm if an external tank is connected or fill the base tank, 3) press buttons to select manual start and start the engine, and 4) manually charge and turn on the breaker to put the generator under load. The generator is stopped by pressing a button, and emergency stop should not be used.
To start the generator, the user must: 1) turn on the battery isolator and main panel switch, 2) reset the fuel alarm if an external tank is connected or fill the base tank, 3) press buttons to select manual start and start the engine, and 4) manually charge and turn on the breaker to put the generator under load. The generator is stopped by pressing a button, and emergency stop should not be used.
To start the generator, the user must: 1) turn on the battery isolator and main panel switch, 2) reset the fuel alarm if an external tank is connected or fill the base tank, 3) press buttons to select manual start and start the engine, and 4) manually charge and turn on the breaker to put the generator under load. The generator is stopped by pressing a button, and emergency stop should not be used.
1. Put the Battery Isolator in ‘ON’ Position. (Near The Batteries)
2. Turn the selector switch ‘ON’ in the Main Panel. 3. If External Tank is connected, reset the fuel alarm by pressing or fill the base tank
4. Press for manual start option.
5. Then Press to Start the Engine.
6. Press to scroll to ‘ENGINE’, Then Press . All engine Parameters will
be displayed. 7. To put generator on LOAD , Charge the breaker (ACB) manually and then put the Breaker ON 8. To remove LOAD Press the OFF button on the breaker (ACB)
9. Press to scroll to ‘GENERATOR’, Then Press . All GENERATOR