Professional Documents
Culture Documents
JetPower - High Pressure Pump Units With Diesel Drive - e
JetPower - High Pressure Pump Units With Diesel Drive - e
i o n l e ve l
Recen t emiss
2
3
Table of contents
Dockyards in Estonia
Repair and maintenance of ships incur high costs and have to run
smoothly. Ships are subject to a high level of wear – salt water and
growth weaken the surfaces and regular repair is inevitable. The
time spent in the docks has to be kept as short as possible, though,
which represents an enormous challenge considering the huge
surface areas of 40 – 50000 square metres. For this reason the
repair specialists at the dockyards in Estonia require the best high
pressure devices with the highest level of reliability and maximum
endurance. They have found them at URACA.
URACA • JetPower
Top performance
requires a strong heart
Industry standard
URACA plunger pumps Quality
are designed for URACA high pressure plunger
uninterrupted heavy pumps are manufactured
duty operation 24 hours in-house considering the highest
a day – for decades. quality standards.
Know-how
Since more than 120 years,
URACA is manufacturing
Variety high pressure pumps.
The optimum pump of
URACA’s product family
for each unit.
Performance
Maximum pressure level
and maximum flow rate.
Not only on paper.
Energy efficiency
URACA products
achieve
highest efficiency.
Cost-effective – year in
and year out.
Our philosophy:
the most reliable units in the market.
Indestructible pumps
with high-quality
components allow
efficient running costs
for the units.
__Customised solution
employees as well as extensive test procedures
Day after day, 70000 cars drive across the the cantilever plates using several URACA high
Felper bridge of the Brenner autobahn. A pressure units and state-of-the-art robot
sealant had to be applied to this bridge technology. This was carried out smoothly,
during renovation – while traffic continued cleanly and without vibrations using a drive
in both directions. performance of 2x 450 kW.
Within the shortest time possible the
renovation experts removed the far ends of Christian Herda,
Managing director
Reinhard Sauter,
Managing director
URACA • JetPower
Road markings should last forever. This Das Entfernen von “Removing
makes it even more difficult when they have road markings and rubber from
to disappear again. The same applies to the asphalt surfaces is a tricky task,
rubber residue which was burnt into the that requires utmost care so as
asphalt of runways by hundreds of aeropla- not to damage the underlying
nes. DAC Waterblasting services cc is a South layer during the cleaning process”
African company which specialises in
renovation preparation of surfaces, removal The high pressure water jet method is the
of road markings and removal of rubber from least abrasive and most productive system for
airport runways. removing paint and rubber residue. DAC
Waterblasting services cc use URACA pump
units which have proven to be very efficient
and reliable for this.
Roberto Marinelli,
Operations manager
Zdenko Krajny,
Managing director
8
9
JetPower 125
Long-term Remote Hand-held Small- Single Particular- Fuel- Control Refinery Exi- Booster-
usage control tools scale consumer filter efficient Level D (Rigsafe) control pump
consumer operation
JetPower 125 Its compact size and its performance class make the
Pump type KD716-GK JetPower 125 the ideal tool for smaller, delicate tasks.
800/1,000/1,200/1,600/ The mobile unit combines easy handling with highest
Standard pressure stages
2,000/2,800 bar
productivity which makes it the professional unit for
31-69 l/min at 800 bar
24.5-54 l/min at 1,000 bar small and large companies. This combination of
18.5-40.5 l/min at 1,200 bar
Flow rate
14-26 l/min at 1,600 bar flexibility and quality is the entry level into the
10.5-23.5 l/min at 2,000 bar professional high pressure range.
8.3-18 l/min at 2,800 bar
Drive power 125 kW/4 cyl./4.7 l
Highlights
with Emission level 3A
__Mobile compact unit for professional use
__Highly variable use, suitable for almost any task
Diesel tank 200 l
Dimensions
stationary without cover approx.2,606 x 1,400 x 1,835 mm
__Sufficient power reserves on a very small footprint
__Flexible use from delicate tasks up to large area
stationary with cover approx. 2,606 x 1,400 x 1,835 mm
mobile with cover approx. 3,925 x 1,875 x 2,185 mm
Dead weight
Design may be subject to modification. Dimensions, weights, illustrations and technical data are without engagement.
1 bar = 14.5038 psi, 1 l/min = 0.26417 USGPM = 0.22 IPGPM, 1 kW = 1.3410 HP, 1 mm = 0.03937 inch
URACA • JetPower
Accessories
__ __ Remote control
Accessory package pipe/heat • Remote control cable
exchanger cleaning • Radio remote control
• 1x foot valve / foot switch • Foot switch
• 1x flexible lance • Hand switch
• 1x pipe cleaning nozzle, fixed • Cable drums
__
• 1x pipe cleaning nozzle, rotating
Special tools
• Robots
• Abrasive cutting heads
• Special tools customer-
specific
JetPower 180
Long-term Remote Hand-held Small- Large- Single Multi Particular- Fuel- Control Refinery Exi- Booster-
usage control tools scale scale consumer consumer filter efficient Level D (Rigsafe) control pump
consumer consumer operation operation
JetPower 180
Pump type KD724-G
Highlights
__Mobile compact unit for professional
800/1,000/1,200/1,600/
Standard pressure stages
2,000/2,800/3,000 bar
54.5-104 l/min at 800 bar
Design may be subject to modification. Dimensions, weights, illustrations and technical data are without engagement.
1 bar = 14.5038 psi, 1 l/min = 0.26417 USGPM = 0.22 IPGPM, 1 kW = 1.3410 HP, 1 mm = 0.03937 inch
URACA • JetPower
Accessories
__
• Special tools customer-
specific
Multi-consumer
• MultiGunUnit
• Mobile release unit
__ Basic tools __ Protective __ Pipe cleaning tools __ Surface cleaning tools __ Tank cleaning tools
• Spray gun SP clothing • Rotating cleaning • Surface cleaning devices • Tank cleaning heads
• Spray lances SL • Ear protection heads RWK • Hand-held surface TWK
• Flexible lances • Gloves • Pipe cleaning nozzle cleaning devices HFL • Small tank cleaners KBR
• Fan nozzles • Overalls fixed/rotating • Nozzle beams
• Point nozzles • Helmets • Sewer cleaning nozzles • Rotating cleaning
• High pressure hose pipe • Boots • Lance cleaning nozzles RWD
• Foot valve FV equipment
14
15
JetPower 300
Hand-held Large- Single Multi Particular- Fuel- Control Refinery Exi- Booster-
tools scale consumer consumer filter efficient Level D (Rigsafe) control pump
consumer operation operation
Design may be subject to modification. Dimensions, weights, illustrations and technical data are without engagement.
1 bar = 14.5038 psi, 1 l/min = 0.26417 USGPM = 0.22 IPGPM, 1 kW = 1.3410 HP, 1 mm = 0.03937 inch
URACA • JetPower
Accessories
__ Remote control
• Remote control cable
• Radio remote control
• Foot switch
• Hand switch
• Cable drums
__ __ Special tools
Multi-consumer • Robots
• MultiGunUnit • Abrasive cutting heads
• Mobile release unit • Special tools customer-
specific
JetPower 480
JetPower 480 The JetPower 480 is ideally suited for cleaning large
Pump type P4-70 vessels or containers and for medium and heavy-
800/1,000/1,200/1,400/1,550/ duty removal tasks. The unit remains mobile
Standard pressure stages
2,000/2,500/2,800/3,000 bar
whether mounted on an HGV or in a container. The
212-305 l/min at 800 bar
165-238 l/min at 1,000 bar high level of power and the convincing flexibility
125-180 l/min at 1,200 bar
105.5-152 l/min at 1,400 bar despite the size make the JetPower 480 an ideal
Flow rate
78.5-113 l/min at 2,000 bar
50.5-73 l/min at 2,500 bar
solution for any application in the high pressure
39-56 l/min at 2,800 bar sector.
39-56 l/min at 3,000 bar
Drive power 565 kW/6 cyl./16.2 l
Highlights
with Emission level 2A
__High pressure unit from the professional range
__Highly variable use, especially suitable for
Diesel tank 900 l (optional)
Water tank 1,500 l (optional)
Dimensions basis approx. 3,900 x 1,815 x 2,110 mm
Design may be subject to modification. Dimensions, weights, illustrations and technical data are without engagement.
1 bar = 14.5038 psi, 1 l/min = 0.26417 USGPM = 0.22 IPGPM, 1 kW = 1.3410 HP, 1 mm = 0.03937 inch
URACA • JetPower
Accessories
__ Remote control
• Remote control cable
• Radio remote control
• Foot switch
• Hand switch
• Cable drums
__ __ Special tools
Multi-consumer • Robots
• MultiGunUnit • Special tools
customer-specific
__ Basic tools __ Protective __ Pipe cleaning tools __ Surface cleaning tools __ Tank cleaning tools
• Flexible lances clothing • Rotating cleaning • Surface cleaning devices • Tank cleaning heads
• Fan nozzles • Ear protection heads RWK • Nozzle beams TWK
• Point nozzles • Gloves • Pipe cleaning nozzle • Rotating cleaning
• High pressure hose pipe • Overalls fixed/rotating nozzles RWD
• Foot valve FV • Helmets • Sewer cleaning nozzles
• Boots • Lance cleaning
equipment
18
19
JetPower 600
Power Mobile
Long-term Remote Large- Single Multi Particular- Fuel- Control Refinery Exi- Booster-
usage control scale consumer consumer filter efficient Level D (Rigsafe) control pump
consumer operation operation
Design may be subject to modification. Dimensions, weights, illustrations and technical data are without engagement.
1 bar = 14.5038 psi, 1 l/min = 0.26417 USGPM = 0.22 IPGPM, 1 kW = 1.3410 HP, 1 mm = 0.03937 inch
URACA • JetPower
Accessories
__ Remote control
• Remote control cable
• Radio remote control
• Foot switch
• Hand switch
• Cable drums
__ __ Special tools
Multi-consumer • Robots
• MultiGunUnit • Special tools
customer-specific
__ Basic tools __ Protective __ Pipe cleaning tools __ Surface cleaning tools __ Tank cleaning tools
• Flexible lances clothing • Rotating cleaning • Surface cleaning devices • Tank cleaning heads
• Fan nozzles • Ear protection heads RWK • Nozzle beams TWK
• Point nozzles • Gloves • Pipe cleaning nozzle • Rotating cleaning
• High pressure hose pipe • Overalls fixed/rotating nozzles RWD
• Foot valve FV • Helmets • Sewer cleaning nozzles
• Boots • Lance cleaning
equipment
URACA – the professional system provider
in the field of High Pressure
Product range
——
Pumps
The heart of the URACA technology:
Superior quality, extremely powerful high
pressure positive displacement pumps,
also for high-demanding continuous use.
• Process and industrial pumps
• Testing pumps
• Cleaning pumps
• Sewer cleaning pumps
——
Units
No pump without drive. This is ——
Plants and systems
why URACA manufactures a vast Especially for cleaning
variety of pump units. Whether applications URACA has a lot
mobile or stationary, with of experience and engineering
different drives and in almost all competence with respect to
size, equipment and design. designing and manufacturing
User-friendly, economical, complete systems, from
powerful and built for professional simple positioning devices up
use in industry and service. to complex cleaning units.
• Diesel driven units • Tank cleaning
• Electrically driven units • Heat exchanger cleaning
• Hydraulically driven units
——
Tools ——
Accessories ——
Components
In high pressure cleaning the Anyone working with the best pumps and Only highest quality system components
efficiency depends on the tool. pump units does not leave anything to guarantee high performance and permanent
This is why URACA manufactures a chance when it comes to accessories. We functioning of high pressure systems.
complete system of highly efficient therefore provide our customers a wide URACA with its experience therefore designs
and high quality cleaning tools for range of high pressure accessories for any and manufactures the best high pressure
any possible application. application. components in a vast variety of designs.
• Spray guns • Nozzles • Valves
• Tank cleaning heads • Remote controls • Rotary feedthrough units
• Sewer cleaning nozzles • Hoses • Multi-consumer systems
• Rotating nozzles • Protective clothing • Resonators, pulsation dampers
JetPower.e 04.16 URACA
URACA GmbH & Co. KG • Sirchinger Straße 15 • 72574 Bad Urach • Germany
Phone +49 (0) 7125 133-0 • Fax +49 (0) 7125 133-202 • info@uraca.de • www.uraca.com